This type of track can be set up for
slaughter lines, in chambers, cutting plants, loading docks, walkways and refrigerated trucks.
Running rail consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.
Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.
Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.
Places in the detours and used to choose the track the hook should move on to. They are made of a pallet, screwed onto the detour, with a nylon cord that is pulled to move the pallet and close one of the detour routes. In this way. when the hook reaches this point, it will only find one rail to move onto.
OPTIONAL: pneumatic power. A small pneumatic piston is included with the hole and. using a manual valve, the hole can be moved to open or close the track.
Used to attach the rail to the secondary structure, and to keep them parallel with a gap of 18 mm between the two rails that make up the track. U-shaped, with a groove in the upper part for the support screws for the brace plate, with win screws on the lower part for the support bolts on the rail brace plate.
Made of L-2640 aluminium.
The distance between the brace plates for the track determines the load the track can support:
Gap between brace plates (mm) | 1100 | 900 | 750 | 650 | 550 |
Max. load (Kg. /metre) | 400 | 500 | 600 | 700 | 800 |
TYPE | TOTAL HEIGHT | TOTAL GAP BETWEEN THE STRUCTURE AND RAIL |
Single | 150 mm | 110 mm |
Single | 240 mm | 200 mm |
Double | 150 mm | 110 mm |
Double | 240 mm | 200 mm |
Double rail (to assemble on chains with an open square tube rail, handrails made of stainless steel) | 240 mm | 200 mm |
All the elements that make up the dual rail systems are joined together with screws. There are two types:
Used to attach the rail to the truck, and to keep them parallel with a gap of 18 mm between the two rails that make up the track. U-shaped, with a groove in the upper part for the support screws for the brace plate, with wing screws on the lower part for the support bolts on the rail brace plate.
Made of AISI-304 stainless steel.
TYPE | TOTAL HEIGHT | TOTAL GAP BETWEEN THE STRUCTURE AND RAIL |
Single | 130 mm | 90 mm |
Double | 130 mm | 90 mm |
Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.
Places at the truck entrance, to be able to place the hooks on different levels within the truck.