Рейтинг@Mail.ru

NALEWARKI GRAWITACYJNE

NALEWARKI WODY (Seria RFC)

Nalewarki grawitacyjne RFC odpowiednie dla wody niegazowanej, ambient liquids do PET i butelek szklanych. Nalewarki mogą być zbudowane jako monobloki oraz tribloki łacznie z płuczką i zakręcarką (możliwość opcji 2-3 rodzajów zamknięc). Liczba nalewaków może wynosić od 24 do 96, gdzie nalewarki mogą wyprodukować do 1000 butelek 0,6 l na minutę.

Pojemność butelek 0,2-1,0 l (szkło) | 0,2-3,0 l (PET)

Opcje na zamówienie
  • HEPA, Enzym
  • Lampa UV
  • Części AISI 316 SS
  • Zawory regulujące natężenie przepływu (odchył +/-0,02%)
Rodzaje zamknięć: kapsel, typu push-twist, nakrętka plastikowa, nakrętka aluminiowa, callog

DANE TECHNICZNE

Wydajność

6.000 - 54.000 but./h dla 500 ml

Zużycie wody płuczącej i spryskującej

~ 0.3 m3/h

Zapotrzebowanie sprężonego powietrza

15 (30) m3/h przy 6 bar

Napięcie zasilania

3 x 400 V, 50 Hz

Napięcie zasilania sterowania

24 V DC

Moc

3 - 48 kW

Ochrona sieci

25 A

Stopień ochrony maszyny IP

54

Poziom chałasu

≤ 78 dbA

Wymiary (Dł. X Sz.  x Wys.)

3000 (6000) x 2000 (4000) x 3000 mm

Waga

- (7000)  kg

Wzór nalewaków

Closing heads

PUSHING IN HEAD TYPE GWW | GWZ-20

Вдавливающая головка типа GWZ-20 и GWW-20
head diameter: 65 mm
head height: 190 mm
net weight: 1,5 kg

Closing heads type GWW-20 and GWZ-20 are the devices co-operating with different types of closing machines and can be installed in closing machines of following companies ROBAK, ALCOA, STORK, KRONES, NAGEMA, Dr. DATZ, ZALKIN. The heads serve to make the closures of plastic and glass bottles using plastic caps with different number of cuts (notches) dia. 20 ÷ 115 mm. The heads are made completely of stainless steel.

CLOSING HEAD TYPE GKW | GKZ–28

Головка для укупорки типа GKZ-28 и GKW-28
head diameter: 84 mm
head height: 195 - 217 mm
net weight: 5 kg

Closing heads type GKW-28 and GKZ-28 are the devices co-operating with different types of closing machines and can be installed in closing machines of following companies ROBAK, ALCOA, STORK, KRONES, NAGEMA, Dr. DATZ, ZALKIN. The magnetic heads serve to make the closures of plastic bottles type PET using plastic caps with different number of cuts (notches) in diameter range of 22 ÷ 113 mm.

TECHNICAL DESCRIPTION

Closing heads type GKW–28 and GKZ–28 are equipped with mechanical clutches enabling precise regulation of tightening torque within range 5 ÷ 60 Nm. The heads ensure repeatability of closings within range ± 2,0 Nm. The heads are made of stainless steel, tool steel and non-ferrous metals. Above mentioned heads are to be used in equipment of smaller and middle productivity.

TYPE GF–28 FIN PLUG (MAXI–CROWN)

Головка для укупорки типа GF-28 FIN пробка (Maxi-Crown)
head diameter: 60 mm
head height: 100 mm
net weight: 0,8 kg

Closing heads type GF-28 are the devices co-operating with different types of closing machines and can be installed in closing machines of following companies ROBAK, ALCOA, STORK, KRONES, NAGEMA, Dr. DATZ, ZALKIN. The heads serve to make the closures of plastic and glass bottles using closures type Maxi–Crown dia. 28 mm. The heads are made of stainless steel, tool steel and non-ferrous metals.

MAGNETIC HEAD TYPE GMW | GMZ–11

Магнитная головка типа GMZ-11 и GMW-11
head diameter:  84 mm
head height: 195 - 217 mm
net weight: 5 kg

Closing heads type GMW-11 and GMZ-11 are the devices co-operating with different types of closing machines and can be installed in closing machines of following companies ROBAK, ALCOA, STORK, KRONES, NAGEMA, Dr. DATZ, ZALKIN. The magnetic heads serve to make the closures of plastic bottles type PET using plastic caps with different number of cuts (notches) in diameter range of 22 ÷ 113 mm.

TECHNICAL DESCRIPTION

Closing heads type GMW–11 and GMZ–11 are equipped with magnetic clutches enabling precise regulation of tightening torque within range 0 ÷ 50 Nm. The heads ensure repeatability of closings within range ± 1,5 Nm. The heads are made completely of stainless steel. The clutches are produced using NEODYM type magnets of very long stability. Above mentioned heads are to be used in equipment of middle and large productivity.

CLOSING HEAD TYPE GRZ | GRW-18

Головка для укупорки типа GRZ-18 и GRW-18
head diameter:  89 mm
head height: 340 mm
net weight: 4,1 kg
TECHNICAL DESCRIPTION
Closing heads type GRZ-18 and GRW-18 are the devices co-operating with different types of closing machines and can be installed in closing machines of following companies ROBAK, ALCOA, STORK, KRONES, NAGEMA, Dr. DATZ, ZALKIN. The closing heads serve to make of closures type PILFER–PROOF and FLAVER–LOK consisting of aluminium closing cap dia. 18 ÷ 25 mm with securing ring, to be used to close the glass and plastic bottles with threaded head. Closing heads are made of stainless steel and non-ferrous metals

MAGNETIC HEAD TYPE GMZ | GMW–29

Магнитная головка типа GMZ-29 и GMW-29
head diameter: 84 mm
head height: 195 - 217 mm
net weight 5 kg

Closing heads type GMZ-29 and GMW-29 are the devices co-operating with different types of closing machines and can be installed in closing machines of following companies ROBAK, ALCOA, STORK, KRONES, NAGEMA, Dr. DATZ, ZALKIN. The magnetic heads serve to make closures of plastic bottles type PET using plastic caps with various numbers of cuttings (notches), diameter range of 22 ÷ 113 mm.

TECHNICAL DESCRIPTION

Closing heads type GMZ–29 and GMW–29 are equipped with magnetic clutches which enable precise regulation of tightening torque within range 0 ÷ 50 Nm. The heads ensure repeatability of closings within range ± 1,5 Nm. The heads are made completely of stainless steel. The clutches are produced using NEODYM type magnets of very long stability. Above mentioned heads are to be used in equipment of middle and large productivity.

CLOSING HEAD GRW | GRZ-28

Closing head GRW-28 and GRZ-28
head diameter: 89 mm
head height: 340 mm
net weight: 5 kg

Closing heads type GRZ-28 and GRW-28 are the devices co-operating with different types of closing machines and can be installed in closing machines of following companies ROBAK, ALCOA, STORK, KRONES, NAGEMA, Dr. DATZ, ZALKIN. Closing heads serve for making following types of closures:

  • FLAVER–LOK consisting of aluminium closing cap dia. 28 mm without securing ring, to be used to close the glass and plastic bottles with threaded head (so called pressure closures),
  • PILFER–PROOF consisting of aluminium closing cap dia. 18 ÷ 40 mm, with securing ring, to be used to close the glass and plastic bottles with threaded head,
  • GUALLA consisting of aluminium – plastic closing cap (or other according to agreement) dia. Up to 34 mm, with securing ring, to be used to close the glass and plastic bottles. The closing heads are made of stainless steel and non-ferrous metals.




EXPLORE ANOTHER EQUIPMENT: