Cold glue

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.
The labelling unit consist of:
  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Pneumatic glue pump type “C 7” 
  • Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber.
  • The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment.

Options:

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.
The labelling unit consist of:
  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Pneumatic glue pump type “C 7” 
  • Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber.
  • The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment.

Options:

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 6 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 4 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 6 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 8 plates driven by greased gears or oil bath gears movement
  • 1 labels application on cylindrical containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 6 plates driven by greased gears or oil bath gears movement
  • 1 labels application on cylindrical containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 8 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.
The labelling unit consist of:
  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Pneumatic glue pump type “C 7” 
  • Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber.
  • The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment.

Options:

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.
The labelling unit consist of:
  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Pneumatic glue pump type “C 7” 
  • Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber.
  • The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment.

Options:

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.
The labelling unit consist of:
  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Pneumatic glue pump type “C 7” 
  • Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber.
  • The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment.

Options:

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 9 plates driven by greased gears or oil bath gears movement
  • Up to 4 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 7 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 10 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 9 plates driven by greased gears or oil bath gears movement
  • Up to 4 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT