Are used for treatment of make-up water and circulating water in heating centrals. The oxygen content is reduced to less than 0.1 mg/l. Possibility of construction in electroplated and stainless steel.
Due to the fact that it is expensive and sometimes difficult to carry out installations and assembly in the offshore industry, it is sensible to do as much of the assembly and testing off-site as possible.
The shown plant is mounted on an epoxy-coated, construction iron skid with drip tray.
The plant is designed for 9 m³/h and consists of filter bags for removal of mechanical impurities, scavenger plant for removal of organic, suspended matter, demineralization plant, plant for neutralization of regeneration chemicals, and a central electric control cabinet.
This complete water treatment plant is made for a 90 MW power plant in Africa. The plant is designed for producing
1.5 m³/h ultra pure water for turbine
7.5 m³/h demineralised cooling water
2.0 m³/h water for fire fighting etc.
The skid comprises the following water treatment plants: Filtration, activated carbon filter, UV-disinfection, dosing of antiscalant, mechanical filtration, double-pass reverse osmosis, EDI (electrodeionization unit). Everything is controlled by a central PLC with touch screen.
The water treatment plant is designed for producing 2 x 3.25 m³/h ultrapure water as make-up water for high-pressure steam boiler. The WTP-F from EUROWATER consists of: water pre-heater, duplex softener, 2 x RO, 2 x EDI, central plc control cabinet including online hardness measurement, conductivity measurement, and flow measurement.
The series comprises nine types. The systems consist of a cylindrical quartz pipe through which the water flows. Several UV lamps are on the outside of the quartz reactor. Reactor and lamps are in a stainless steel housing. Equipped with UV sensor. The systems are sanitizable.
The series comprises three types. The systems consist of a cylindrical reactor of acidproof steel with Spektrotherm® UV lamp in a quartz pipe. Equipped with UV sensor. Certified in accordance with the Austrian ÖNORM and the German DVGW standards. Biodosimetrically tested.