NCOLD S.p.A. was founded in 1996 as a separate company and member of the Arneg group, devoted to the production of cold rooms. A specialized technical team and the knowledge of the market acquired in the sphere of the group at the world level have...
The two leaves PCE-2B series of hinged doors, available for both positive and negative temperature, consist in 4 essential parts as listed below:
A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating cable.
B - Two leaves consisting of: two supports in pre-painted sheet white RAL9010 surrounded by an anodized aluminium profile, with rigid polyurethane foam injected on the inside to act as thermal isolation. Along the edge in anodized aluminium, is seated a special gasket which guarantees the temperature seal.
On the semi-fixed leaf there is a central doorstop profile which guarantees the temperature seal in central position. In the low temperature version the central doorstop profile is equipped of an anti-condensation heating cable. The hardware consist mainly of: rotating handle fixed on the moving leaf, complete with key lock and internal safety release; internally to the semi-fixed leaf there is a key lock type espagnolette bolt, which allow the locking of the leaf both on the inferior and superior part on the closing position; two helical hinges, for each leaf adjustable with screws.
The leaf is furnished in two different thicknesses depending on the working temperature:
CE2B 07 TN for uses up to -5°C
CE2B 09 BT for uses up to – 20°C
C - The threshold connected to the frame can be of 4 different types according to the required use of the door.
D - Connecting profiles in stainless steel for fastening on prefabricated panel. An optional version has the counter frame in reinforced plastic material.