NCOLD S.p.A. was founded in 1996 as a separate company and member of the Arneg group, devoted to the production of cold rooms. A specialized technical team and the knowledge of the market acquired in the sphere of the group at the world level have...
Door for “Controlled Atmosphere” cold rooms for preservation and ripening where the internal temperature is not lower than -5°C; it guarantees the hermtic seal of the cold room.
A - Frame in plastic material internally reinforced in steel, white, with gasket tightening handwheels to ensure the gas seal.
B - Leaf consisting of a sandwich in prepainted sheet RAL 9010 insulated with PUR density 41 kg/m3, perimetric rim in aluminium with a gas seal gasket along its perimeter, with a standard thickness of 9 cm. An inspection porthole cm 70 x 90 H is mounted on the door leaf.
C - Sliding Rail in anodized aluminium with carter.
D - Back rail for sliding and regulation, wall mounted; it enables the sliding motion and the seal of the gasket, without additional accessories mounted to the floor that could be obstructive.
E - Threshold, connected to the frame, can be in 2 different types according to the required use of the door.
F - Internal frame placed on the internal side of the cold room permits rapid fastening to the prefabricated panels.