Scale ice

Scale ice

Scale ice is an extremely versatile product, with a number of diverse commercial applications, from the fishing industry to the construction sector.
It is much flatter and thinner than nugget ice and made by scale ice machines at a lower temperature, around -7℃, meaning it is actually cold enough refreeze its own meltwater.
To combat this, scale ice storage should always be maintained at a temperature below 0℃, to avoid the formation of jagged or fused lumps which are not fit for purpose.
As with StreamIce® systems, the output of scale ice machines can be altered and controlled by the introduction of salt.
Smaller flakes are produced via the use of just fresh water but the introduction of the appropriate salt levels can improve the quality and size of the ice. 

Ziegra designs and manufactures scale ice machines with up to 2500kg capacity, specifically for installation on board fishing vessels.

These are comprehensively tested to ensure optimum suitability for their setting, in terms of reliability, consistency and robustness in harsh conditions. Fish packing aside, scale ice machines are not recommended for applications where the ice will be mixed with food products.

Larger scale ice machines up to 15000kg capacity are available for use in heavy industry critical operations such as concrete cooling and reactor cooling.

The Ziegra ZSM 1.000TWF on board ice machine makes up to 1,000kg per 24 hours of scale ice from freshwater

  • 1000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube 
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304

  

0.00 KZT
  • 2500kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12 mm  22/25 mm PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT

The Ziegra ZSM 2500 ice machine makes up to 2500kg per 24 hours of scale ice

  • 2500kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply   10 - 12mm plain tube - chrome brass  20/22mm Ø SS plain ended tube  3/8" plug PVC     
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT
  • 3000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 1/2” BSP chromed brass  20/22mm Ø SS plain ended tube  3/8" plug PVC   
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT
  • 6,000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT
  • 8000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304

 

0.00 KZT
  • 10000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 1/2" flare nut - brass  21.3 x 2.8mm Ø SS plain ended tube
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304

 

0.00 KZT
  • 1500kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply   1/2" BSP - chromed brass  10/22mm Ø SS plain ended tube  1/2" plug - pvc       
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT
  • 50000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction