Continuous long pasta processing lines

Main | Pasta processing technologies |Continuous pasta processing lines | Continuous long pasta processing lines

Continuous long pasta processing lines

The best balance between technology, easiness and production/maintenance costs saving. The T.V.S. press (Total Vacuum System) and the use of high temperatures allow to achieve excellent quality pasta despite the use of poor quality raw material.

Press

The most important features of this equipment are the TURBOMIX technology and the low-speed of extrusion, which is achieved thanks to the high-efficiency compression screws: these characteristics allow to obtain a very homogenous dough. The press can be fitted either with Total Vacuum System or traditional technology.

Spreader

This equipment allows a homogeneous spreading of the Long-Cut Pasta on 2550 mm sticks. It is provided with an automatic system for fresh scraps recovery and a pneumatic conveying system to the press.

Pre-Dryer, Dryer and Cooler

The surface of the Long-Cut Pasta is pre-dried, with a continuous hot air flow, to prepare the product for the subsequent drying phase.

Thanks to the MONOTIER technology, a succession of ventilation phases and off phases occurs with the maximum simplicity, completely controlled by automatic systems of thermohygroregulation.

The cooler, which features an heat exchanger entirely made of stainless steel, allows to lower the temperature of Long-Cut Pasta and make it suitable for storage and / or packaging.

Buffer and Stripper

With a storage capacity of approximately 30-35 minutes, the buffer makes possible to store LongCut Pasta on sticks before the stripper, to compensate possible short shutdowns of the packaging system.

The stripper automatically removes the sticks and cuts the pasta to the length required for the next phase of packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Capacity and dimensions

H (mm) L1 (mm) L2 (mm)
7700 42800 49200

0.00 KZT

Axor Ocrim has combined the tradition of the double racks for the sticks movement to the new Thermal Inversion Technology (T.I. Technology), giving the chance to choose between TVS technology press (Total Vacuum press) and the traditional press, reinforced aluminum sticks and, finally, the perfect mechanical movement of the double racks.

Press

The most important features of this equipment are the TURBOMIX technology and the low-speed of extrusion, which is achieved thanks to the high-efficiency compression screws: these characteristics allow to obtain a very homogenous dough. The press can be fitted either with Total Vacuum System or with traditional technology.

Spreader

This equipment allows a homogeneous spreading of the Long-Cut Pasta on 2550 mm sticks. It is provided with an automatic system for fresh scraps recovery and a pneumatic conveying system to the press.

Pre-Dryer, Dryer and Cooler

The surface of the Long-Cut Pasta is pre-dried, with a continuous hot air flow, to prepare the product for the subsequent drying phase.

A permanent and homogeneous drying of Long-Cut Pasta is permitted by the switching from ventilation phases to rest phases, which are totally controlled by automatic thermohygroregulation systems and are combined with a mechanical double rack guide.

Provided with a heat exchanger entirely manufactured in stainless steel, the cooler allows to cool Long-Cut Pasta and to prepare the pasta for the next storing and packaging phase.

Storage Silo and Stripper

During the night shift of production, it is possible to collect the Long-Cut Pasta on sticks. Every tier has an independent motorization to synchronise the loading and unloading of the storage silo, through an automation system devoted to this equipment.

The stripper automatically removes the sticks and cuts the pasta to the length required for the next phase of packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

H1 (mm) H2 (mm) L1 (mm) L2 (mm)
10000 8300 50900 81000

 

0.00 KZT

Axor Ocrim has combined the tradition of the double racks for the sticks movement to the new Thermal Inversion Technology (T.I. Technology), giving the chance to choose between TVS technology press (Total Vacuum press) and the traditional press, reinforced aluminum sticks and, finally, the perfect mechanical movement of the double racks.

Press

The most important features of this equipment are the TURBOMIX technology and the low-speed of extrusion, which is achieved thanks to the high-efficiency compression screws: these characteristics allow to obtain a very homogenous dough. The press can be fitted either with Total Vacuum System or with traditional technology.

Spreader

This equipment allows a homogeneous spreading of the Long-Cut Pasta on 2550 mm sticks. It is provided with an automatic system for fresh scraps recovery and a pneumatic conveying system to the press.

Pre-Dryer, Dryer and Cooler

The surface of the Long-Cut Pasta is pre-dried, with a continuous hot air flow, to prepare the product for the subsequent drying phase.

A permanent and homogeneous drying of Long-Cut Pasta is permitted by the switching from ventilation phases to rest phases, which are totally controlled by automatic thermohygroregulation systems and are combined with a mechanical double rack guide.

Provided with a heat exchanger entirely manufactured in stainless steel, the cooler allows to cool Long-Cut Pasta and to prepare the pasta for the next storing and packaging phase.

Storage Silo and Stripper

During the night shift of production, it is possible to collect the Long-Cut Pasta on sticks. Every tier has an independent motorization to synchronise the loading and unloading of the storage silo, through an automation system devoted to this equipment.

The stripper automatically removes the sticks and cuts the pasta to the length required for the next phase of packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

H1 (mm) H2 (mm) L1 (mm) L2 (mm)
9500 8300 47300 76000

0.00 KZT

Axor Ocrim has combined the tradition of the double racks for the sticks movement to the new Thermal Inversion Technology (T.I. Technology), giving the chance to choose between TVS technology press (Total Vacuum press) and the traditional press, reinforced aluminum sticks and, finally, the perfect mechanical movement of the double racks.

Press

The most important features of this equipment are the TURBOMIX technology and the low-speed of extrusion, which is achieved thanks to the high-efficiency compression screws: these characteristics allow to obtain a very homogenous dough. The press can be fitted either with Total Vacuum System or with traditional technology.

Spreader

This equipment allows a homogeneous spreading of the Long-Cut Pasta on 2550 mm sticks. It is provided with an automatic system for fresh scraps recovery and a pneumatic conveying system to the press.

Pre-Dryer, Dryer and Cooler

The surface of the Long-Cut Pasta is pre-dried, with a continuous hot air flow, to prepare the product for the subsequent drying phase.

A permanent and homogeneous drying of Long-Cut Pasta is permitted by the switching from ventilation phases to rest phases, which are totally controlled by automatic thermohygroregulation systems and are combined with a mechanical double rack guide.

Provided with a heat exchanger entirely manufactured in stainless steel, the cooler allows to cool Long-Cut Pasta and to prepare the pasta for the next storing and packaging phase.

Storage Silo and Stripper

During the night shift of production, it is possible to collect the Long-Cut Pasta on sticks. Every tier has an independent motorization to synchronise the loading and unloading of the storage silo, through an automation system devoted to this equipment.

The stripper automatically removes the sticks and cuts the pasta to the length required for the next phase of packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

H1 (mm) H2 (mm) L1 (mm) L2 (mm)
9500 7500 42200 69000

0.00 KZT

The best balance between technology, easiness and production/maintenance costs saving. The T.V.S. press (Total Vacuum System) and the use of high temperatures allow to achieve excellent quality pasta despite the use of poor quality raw material.

Press

The most important features of this equipment are the TURBOMIX technology and the low-speed of extrusion, which is achieved thanks to the high-efficiency compression screws: these characteristics allow to obtain a very homogenous dough. The press can be fitted either with Total Vacuum System or traditional technology.

Spreader

This equipment allows a homogeneous spreading of the Long-Cut Pasta on 2550 mm sticks. It is provided with an automatic system for fresh scraps recovery and a pneumatic conveying system to the press.

Pre-Dryer, Dryer and Cooler

The surface of the Long-Cut Pasta is pre-dried, with a continuous hot air flow, to prepare the product for the subsequent drying phase.

Thanks to the MONOTIER technology, a succession of ventilation phases and off phases occurs with the maximum simplicity, completely controlled by automatic systems of thermohygroregulation.

The cooler, which features an heat exchanger entirely made of stainless steel, allows to lower the temperature of Long-Cut Pasta and make it suitable for storage and / or packaging.

Buffer and Stripper

With a storage capacity of approximately 30-35 minutes, the buffer makes possible to store LongCut Pasta on sticks before the stripper, to compensate possible short shutdowns of the packaging system.

The stripper automatically removes the sticks and cuts the pasta to the length required for the next phase of packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Capacity and dimensions

H (mm) L1 (mm) L2 (mm)
7700 33200 38700

0.00 KZT

Axor Ocrim has combined the tradition of the double racks for the sticks movement to the new Thermal Inversion Technology (T.I. Technology), giving the chance to choose between TVS technology press (Total Vacuum press) and the traditional press, reinforced aluminum sticks and, finally, the perfect mechanical movement of the double racks.

Press

The most important features of this equipment are the TURBOMIX technology and the low-speed of extrusion, which is achieved thanks to the high-efficiency compression screws: these characteristics allow to obtain a very homogenous dough. The press can be fitted either with Total Vacuum System or with traditional technology.

Spreader

This equipment allows a homogeneous spreading of the Long-Cut Pasta on 2550 mm sticks. It is provided with an automatic system for fresh scraps recovery and a pneumatic conveying system to the press.

Pre-Dryer, Dryer and Cooler

The surface of the Long-Cut Pasta is pre-dried, with a continuous hot air flow, to prepare the product for the subsequent drying phase.

A permanent and homogeneous drying of Long-Cut Pasta is permitted by the switching from ventilation phases to rest phases, which are totally controlled by automatic thermohygroregulation systems and are combined with a mechanical double rack guide.

Provided with a heat exchanger entirely manufactured in stainless steel, the cooler allows to cool Long-Cut Pasta and to prepare the pasta for the next storing and packaging phase.

Storage Silo and Stripper

During the night shift of production, it is possible to collect the Long-Cut Pasta on sticks. Every tier has an independent motorization to synchronise the loading and unloading of the storage silo, through an automation system devoted to this equipment.

The stripper automatically removes the sticks and cuts the pasta to the length required for the next phase of packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

H1 (mm) H2 (mm) L1 (mm) L2 (mm)
9300 7500 39200 58000

0.00 KZT