Continuous short-pasta processing lines

Main | Pasta processing technologies |Continuous pasta processing lines | Continuous short-pasta processing lines

Continuous short-pasta processing lines

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

 
H1 (mm) H2 (mm) L (mm) P (mm)
6300 6200 25500 4860

0.00 KZT

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

 
H1 (mm) H2 (mm) L (mm) P (mm)
7000 6900 27000 4860

0.00 KZT

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

 
H1 (mm) H2 (mm) L (mm) P (mm)
7000 7700 29600 5310

0.00 KZT

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

 
H1 (mm) H2 (mm) L (mm) P (mm)
7500 8600 31500 5310

0.00 KZT

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

H1 (mm) H2 (mm) L (mm) P (mm)
7500 8600 31500 5310

0.00 KZT

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

H1 (mm) H2 (mm) L (mm) P (mm)
9600 8600 38600 5310

0.00 KZT

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

 
H1 (mm) H2 (mm) L (mm) P (mm)
9800 8600 41000 5310

0.00 KZT

The technology developed by Axor Ocrim allows to use any type of raw material. Thanks to the vacuum press, the new generation energy saving shaker (patented) and the high temperature dryer, it is possible to produce an excellent pasta, even using soft wheat flour.

 

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness that is necessary for pasta to keep its shape at the exit of the die head.
The press can be fitted either with Total Vacuum System or with traditional technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in the next steps of the pasta production process.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.

Dimensions

 
H1 (mm) H2 (mm) L (mm) P (mm)
9800 9400 41000 5310

0.00 KZT