Fresh, precooked and stuffed pasta

Main | Pasta processing technologies | Fresh, precooked and stuffed pasta

Fresh, precooked and stuffed pasta

Treatment is effected by means of "microperforated plates" device ensuring maximum penetration of heat and treatment homogeneity. High performance and energy-saving are ensured by innovative design and excellent insulation

Entirely made in stainless steel, fully dismountable for easy internal cleaning to ensure absolute hygiene. The 6-cm. thick, stainless steel panelling is thermally insulated, ensuring maximum thermal insulation to avoid heating up of the working environment, energy saving and total safety for the operators. 

The pasteurization treatment is obtained by means of the revolutionary system of “MICROPERFORATED PLATES” located above the pasteurizer that uniformly envelop the product in a jet of steam, ensuring maximum heat penetration and omogeneity of treatment.
This pasta machine can operate either with saturated or overheated steam. 

  • The saturated steam supplied by an external generator performs traditional pasteurization and constant treatment temperature ensures even pasteurization without condensations.
  • Operating by overheated steam, this machine is the ideal choice for a modern company, sensitive to those hygienical and safety regulations, which make the difference today. Pasteurization is effected by an air/steam mixture overhated up to over 300°C while temperature inside the pasteurization chamber reaches over 100°C. This new technology enables to reach 80-90°C at core of the product in a very short time while keeping its organoleptic qualities unchanged.
  • Thus the product remains stable and dry. Output depends on length of the pasteurization chamber, type of steam used and type of product to be treated: size, thickness, total umidity.

Available customizations:

  • Belt in special polyester net suitable for high temperatures, used to avoid leaving those marks on the product surface which remain when using stainless steel net.

Technical data and machine measures supplied upon request depending on model and dimensions.

0.00 KZT

Experience and research are required to obtain cookers studied to ensure excellent results and maximum efficiency, automatism and hygiene

Pasta machine built in stainless steel, equipped with water heating system by means of heat exchanger.

Scope of the heat exchanger working at 6 Bar saturated steam is to ensure constant and homogeneous cooking temperature inside the basin well over 98°C, so as to avoid fitting of internal coils, which could make it difficult to carry out washing operations at the end of the working day.

  • Suitable for cooking of bulk products, short pasta, ravioli, tortellini, spaghetti, etc. as well as sheet pasta for lasagne and cannelloni. Equipped with a conveyor belt made in alimentary polypropylene and stainless steel, running in two modes: impulse running for bulk products; continuous running for sheet pasta with automatic increase of water-level..
  • All the machines can be equipped with automatic device for lid lifting and conveyor mat.
  • The PLC fitted on the control panel equipped with software program studied by ITALPAST enables total control of the machine, automatically regulating cooking time, speed, water-levels and synchronization with the conveyor belts or the machinery that might be placed before/after the cooker.
0.00 KZT

Experience and research are required to obtain cookers studied to ensure excellent results and maximum efficiency, automatism and hygiene

Pasta machine built in stainless steel, equipped with water heating system by means of heat exchanger.

Scope of the heat exchanger working at 6 Bar saturated steam is to ensure constant and homogeneous cooking temperature inside the basin well over 98°C, so as to avoid fitting of internal coils, which could make it difficult to carry out washing operations at the end of the working day.

  • Ideal for cooking of sheet pasta, generally used for the production of lasagne and cannelloni.
  • The sheet pasta is conveyed by means of a roller chain driven by side chains.
  • All the machines can be equipped with automatic device for lid lifting and conveyor mat.
  • The PLC fitted on the control panel equipped with software program studied by ITALPAST enables total control of the machine, automatically regulating cooking time, speed, water-levels and synchronization with the conveyor belts or the machinery that might be placed before/after the cooker.
0.00 KZT

The PA Pasteurizers have been engineered to make it possible for fresh pasta producers with limited production capacity to exploit the pasteurization technology. The pasta pasteurization process has been developed and refined by Italpast for the big fresh and filled pasta production lines of the industrial type.

The pasteurization treatment for fresh pasta is obtained by saturated steam, generated inside the machine itself directly below the conveyor belt, which is equipped with stainless steel net.

  • The evaporation basin can be heated up by liquid gas or methan gas (model PA /G) or by electrical heating elements (model PA /E). The pasta machine design is very compact, so as to enable use in the smallest possible rooms; also, the machine is easily accessible for washing and cleaning operations. 
  • All panelling is made in stainless steel. 
  • Quartz lamps and fans are installed after the pasteurisation basin to pre-dry the product after pasteurisation. The main motor-drive is equipped with mechanical speed variator enabling variation of the pasteurization time.
0.00 KZT

The PA Pasteurizers have been engineered to make it possible for fresh pasta producers with limited production capacity to exploit the pasteurization technology. The pasta pasteurization process has been developed and refined by Italpast for the big fresh and filled pasta production lines of the industrial type.

The pasteurization treatment for fresh pasta is obtained by saturated steam, generated inside the machine itself directly below the conveyor belt, which is equipped with stainless steel net.

  • The evaporation basin can be heated up by liquid gas or methan gas (model PA /G) or by electrical heating elements (model PA /E). The pasta machine design is very compact, so as to enable use in the smallest possible rooms; also, the machine is easily accessible for washing and cleaning operations. 
  • All panelling is made in stainless steel. 
  • Quartz lamps and fans are installed after the pasteurisation basin to pre-dry the product after pasteurisation. The main motor-drive is equipped with mechanical speed variator enabling variation of the pasteurization time.
0.00 KZT

The PA Pasteurizers have been engineered to make it possible for fresh pasta producers with limited production capacity to exploit the pasteurization technology. The pasta pasteurization process has been developed and refined by Italpast for the big fresh and filled pasta production lines of the industrial type.

The pasteurization treatment for fresh pasta is obtained by saturated steam, generated inside the machine itself directly below the conveyor belt, which is equipped with stainless steel net.

  • The evaporation basin can be heated up by liquid gas or methan gas (model PA /G) or by electrical heating elements (model PA /E). The pasta machine design is very compact, so as to enable use in the smallest possible rooms; also, the machine is easily accessible for washing and cleaning operations. 
  • All panelling is made in stainless steel. 
  • Quartz lamps and fans are installed after the pasteurisation basin to pre-dry the product after pasteurisation. The main motor-drive is equipped with mechanical speed variator enabling variation of the pasteurization time.
0.00 KZT

AUTOMATIC FLOUR FEEDING composed of the following:

  • loading hopper in stainless steel by various capacities ranging from 250 up to 500 lts
  • spiral conveyor in stainless steel with flexible pipe in alimentary rilsan up to more than 6 mts.
  • discharge conveyor complete with upper shutter for inspection and beater by eccentric masses electro-vibrator
  • volumetric dosage to the mixing basin programmable thanks to timer or coupled with loading levels.
  • Fitted upon wheels support; 

Options

  • special dimensions with various capacities 
  • prearrangement for minimum and maximum levels.

 

0.00 KZT

Made in stainless steel it is particularly suitable to be used in production lines of fresh pasta coupled with automatic sheeters or extruders for lasagne or tagliatelle production.
It can also be used coupled with cookers for lasagne and pre-cooked cannelloni in cooking lines.
The refining rollers can be made in ground steel or in thickness-chromed iron, they feature variable diameter depending on models and width and are equipped with scrapers in teflon-coated brass, taking into consideration the large variety of models.

Model equipped with the following:

  • Electronic speed variator
  • Optic-eye for automatic check of sheet pasta tension
  • Side-knives for sheet pasta trimming
0.00 KZT

Automatic machine for the production of double-sheet ravioli of any shapes and sizes, also customized. Simple to operate, easy replacement of the mould and change of filling, fast cleaning

Modern design, complete with speed variator, responding to any production requirements of medium-size pasta factories.
This machine can operate coupled with sheeters and/or in direct coupling with extruders.

By easily fitting the suitable moulds, any shapes can be obtained: square, rectangular, round, half-moon and specialties such as “sebadas”, “empanada”, “pierogi” "vareniki" "pelmeni" or special sizes like fish, Christmas tree and many other shapes upon request.
Filling of any consistencies is automatically dosed by piston dosage unit enabling to adjust quantity that is injected into the product.

The patented moulds can be also easily opened for washing and cleaning.
Easy replacement of shapes and types of filling added to the sturdy frame, reliability and simple operation makes mod. RA 120 the best expression of a ravioli forming machine.

 

0.00 KZT

The PA Pasteurizers have been engineered to make it possible for fresh pasta producers with limited production capacity to exploit the pasteurization technology. The pasta pasteurization process has been developed and refined by Italpast for the big fresh and filled pasta production lines of the industrial type.

The pasteurization treatment for fresh pasta is obtained by saturated steam, generated inside the machine itself directly below the conveyor belt, which is equipped with stainless steel net.

  • The evaporation basin can be heated up by liquid gas or methan gas (model PA /G) or by electrical heating elements (model PA /E). The pasta machine design is very compact, so as to enable use in the smallest possible rooms; also, the machine is easily accessible for washing and cleaning operations. 
  • All panelling is made in stainless steel. 
  • Quartz lamps and fans are installed after the pasteurisation basin to pre-dry the product after pasteurisation. The main motor-drive is equipped with mechanical speed variator enabling variation of the pasteurization time.
0.00 KZT

AUTOMATIC FLOUR FEEDING composed of the following:

  • loading hopper in stainless steel by various capacities ranging from 500 lts
  • spiral conveyor in stainless steel with flexible pipe in alimentary rilsan up to more than 6 mts.
  • discharge conveyor complete with upper shutter for inspection and beater by eccentric masses electro-vibrator
  • volumetric dosage to the mixing basin programmable thanks to timer or coupled with loading levels.
  • with mixing device for different type of the flour mixing before feeding to extruder.

Options

  • special dimensions with various capacities 
  • prearrangement for minimum and maximum levels.
0.00 KZT

Made in stainless steel it is particularly suitable to be used in production lines of fresh pasta coupled with automatic sheeters or extruders for lasagne or tagliatelle production.
It can also be used coupled with cookers for lasagne and pre-cooked cannelloni in cooking lines.
The refining rollers can be made in ground steel or in thickness-chromed iron, they feature variable diameter depending on models and width and are equipped with scrapers in teflon-coated brass, taking into consideration the large variety of models.

Model equipped with the following:

  • Electronic speed variator
  • Optic-eye for automatic check of sheet pasta tension
  • Side-knives for sheet pasta trimming
0.00 KZT

Pasta extruders equipped with double basin suitable for continuous production of fresh pasta of the short, long and sheet kind, which can be obtained with any types of flour. These pasta machines are particularly suitable for pasta shops and large communities. Entirely built in stainless steel they are to the international, hygienical and safety rules.

Vacuum version

Special version with vacuum extrusion device enabling to obtain more homogeneous dough and final product which is more colourful and air bubble-free.

Models equipped with the following:

  • automatic pasta cutter;
  • fan for pre-drying of pasta;
  • dismountable shafts of mixers.

Optionals:

  • vacuum extrusion device and relevant pump;
  • vertical extrusion head;
  • impulse-pasta cutting device for long pasta and special shapes.
0.00 KZT

Fully in stainless steel, dismountable and washableю The forming machines for ravioli and cappelletti feature solid design and sturdy structure.
All parts in contact with the product are in stainless steel AISI 304, simple to disassemble for easy cleaning. The high quality commercial items can be easily found on international markets.

  • The forming mould is interchangeable by simple and fast operation.
  • The mould stroke rate is adjustable depending on the product size you wish to obtain.
  • Sheet thickness and quantity of filling are also adjustable.
  • The forming machine can be completed with scrap-cutting system and group of conveyors for scraps recover.
  • The filling dosage device is fully independent and can be removed to enable washing operations.
  • The electric control panel is equipped with PLC and keyboard for programming and storing of working phases. 
0.00 KZT

Continuous mixing of alimentary pasta predisposed for equipped with centrifuge pre-mixer

Suitable for continuous preparation and hydration of alimentary pasta used for production of the following special regional pasta s.a zhaima (jaima) lasagna, kespe.

They are generally used in continuous production lines with possibility to feed the dough automatically up to 8 stations thanks to proper conveyor belts or shuttle-system for delivery pasta batch to other units.

Mixer consist of:

  • ladder and access footpath
  • automatic dosage of water
  • dosing of flour made up of receipt hopper with levels and beater
  • mixing basin with conical fixing shovels that can be turned in all directions, safety grid, pre-arrangement for waste recover cyclone
  • discharge shutter with pneumatic control

Options

  • Centrifuge pre-mixer
  • Dosing plant of eggs and other liquid additives
  • Dosing tank of eggs or liquid additives with capacity from 150 up to 600 lts.
  • Flour feeding from silos or loading hopper
  • Predisposition for fitting of cyclone for automatic scrap recover
0.00 KZT