Dual rail systems BLASAU

Dual rail systems BLASAU

This type of track can be set up for

  • Pig
  • Sheep
  • Cattle

slaughter lines, in chambers, cutting plants, loading docks, walkways and refrigerated trucks.

RUNNING RAIL

Running rail consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

DETOURS

Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

  • 45° detours with 2 tracks
  • 90° detours with 2 tracks
  • 90° detours with 3 tracks

CURVES

Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

  • Radius 350 mm.
  • Placed underneath the sections where the rail needs to change directions.
  • There are two types: 45° curves and 90° curves.

 

HOLES

Places in the detours and used to choose the track the hook should move on to. They are made of a pallet, screwed onto the detour, with a nylon cord that is pulled to move the pallet and close one of the detour routes. In this way. when the hook reaches this point, it will only find one rail to move onto.

OPTIONAL: pneumatic power. A small pneumatic piston is included with the hole and. using a manual valve, the hole can be moved to open or close the track.

 

BRACE PLATES

Used to attach the rail to the secondary structure, and to keep them parallel with a gap of 18 mm between the two rails that make up the track. U-shaped, with a groove in the upper part for the support screws for the brace plate, with win screws on the lower part for the support bolts on the rail brace plate.

Made of L-2640 aluminium.

The distance between the brace plates for the track determines the load the track can support:

Gap between brace plates (mm) 1100 900 750 650 550
Max. load (Kg. /metre)   400 500 600 700 800

 

TYPE TOTAL  HEIGHT  TOTAL GAP BETWEEN THE STRUCTURE AND RAIL
Single 150 mm 110 mm
Single 240 mm 200 mm
Double 150 mm 110 mm
 Double 240 mm 200 mm
Double rail (to assemble on chains with an open square tube rail, handrails made of stainless steel)  240 mm 200 mm

          

SCREWS

All the elements that make up the dual rail systems are joined together with screws. There are two types:

  • Screws to support the brace plates and attach them to the supporting beams, made up of bolts that can be attached to the brace place and support beam. Aluminium nails and stainless steel screws.
  • Screws to support the rail and the brace plates, made of special screws that can be inserted into the rail groove and are tightened using a wrench. These screws are made of stainless steel.

BRACE PLATES FOR TRUCKS

Used to attach the rail to the truck, and to keep them parallel with a gap of 18 mm between the two rails that make up the track. U-shaped, with a groove in the upper part for the support screws for the brace plate, with wing screws on the lower part for the support bolts on the rail brace plate.

Made of AISI-304 stainless steel.

TYPE  TOTAL  HEIGHT TOTAL GAP BETWEEN THE STRUCTURE AND RAIL
Single 130 mm 90 mm
Double 130 mm 90 mm

       
       
TRUCK ENTRANCE

Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

Places at the truck entrance, to be able to place the hooks on different levels within the truck.

г. Алматы
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction