ZIEGRA

Main | Products "ZIEGRA"

Products "ZIEGRA"

Ziegra Eismaschinen GmbH’ which is based near Hanover in Germany has been operating since 1957. Our extensive experience has made us one of the leading specialist companies in the world,  who deal exclusively with industrial ice machines and the technology associated with it.

More than 80 specialists work at ZIEGRA, concentrating on every aspect of ice. This experience along with our constant research and development make ZIEGRA the European benchmark for quality and innovation. To date, Ziegra ice machines are used in over 160 countries on all continents.

The machines are manufactured from high quality branded components from suppliers such as Bitzer, Bock, Danfoss, Siemens etc or produced by specialist companies in Germany.

Using state of the art technology, every Ziegra ice machine is manufactured and tested at the factory, during which comprehensive performance checks are carried out, before any machine is released for shipping.

We are one of the few manufacturers to offer all major commercial and industrial ice types including flake, scale, liquid and nugget. As well as our extensive range of standard ice machines, we also design and build ice machines to your bespoke requirements

The Ziegra ZBE 1200 ice machine makes up to 1200kg per 24 hours of flake ice in one of three sizes. It is available in both standard and tropical versions.

  • 1200 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZSM 1.000TWF on board ice machine makes up to 1,000kg per 24 hours of scale ice from freshwater

  • 1000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube 
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304

  

0.00 KZT

The Ziegra ZBE 1000 ice machine makes up to 1000kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions.

 

  • 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 375-K45 ice machine makes up to 375kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

 

  • 375 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZNE 300-K45 ice machine makes up to 300kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

 

  • 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZNE 300-BK200 ice machine makes up to 300kg of nugget ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

 

  • 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZNE 500-SG500 ice machine makes up to 500 kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500 kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

  • 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZNE 500-BK200 ice machine makes up to 500kg of nugget ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

  • 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZNE1.000-SG500 ice machine makes up to 1,000kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

 

  • 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 400 kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

 

  • 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 630kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

 

  • 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 150 ice machine makes up to 150kg of flake ice in one of two sizes and is a complete packaged ice machine including, ice maker, refrigeration and condenser in one unit.. The machine is easy to install requiring only positioning and connection to utilities. It is pre-commissioned in the factory and shipped ready to run.

 

  • 150 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 250 ice machine makes up to 250kg per 24 hours of flake ice in one of two sizes. The machine is easy to install requiring only positioning and connection to utilities. The standard machine is pre-commissioned in the factory and shipped ready to run.

  • 250 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The ZBE 70-35 is a compact machine designed for floor mounting. It makes up to 70kg per day and stores 35kg in an integrated ice storage bin and is a complete packaged ice machine including, ice maker, refrigeration and condenser in one unit.

 

Main Features

  • 70kg / 24h nominal capacity at 20°C air and 15°C water
  • Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Two sizes of ice flake available: micro and midi,  to suit a wide range of applications.
  • Water supply 14mm  ¾” BSP 
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Hygienic design with a sealed water system 
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks
  • Environmentally friendly natural refrigerant

Connections

C: Ice bin
D: Electrical cable / plug: Standard UK 3 pin
E: Water connection: ¾ BSP
F: Overflow: 14mm
G: Filter: Ziegra Single supplied as standard
H: Stop valve by customer
J: socket with 13amp fuse by customer

Dimensions

 

 

The ZBE 70-35 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

  • 1 x Electrical flex 3.5 metre
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose
  • 1 x Small ice scoop
  • 1 x Ziegra Single water filtration kit

Options

Drain pump: For applications where there is no floor level drain available. Ziegra recommend either a floor level drain or a support frame are used, but if neither of those are possible this is a lower cost option.

Water cooled condenser where air-cooling is not possible. Consumption cooling water: 50 litre per hour

E: water supply (ice production)
F: water discharge (eg auto water drain)
O: cooling water in
P: cooling water return or drainage, resp.

Stainless steel support  to raise the machine by 40cm, for applications where there is no floor level drain available and the customer does not want to rely on a drain pump.

Also useful if this model is not to be used on a bench to raise it to a more ergonomic height.

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

Hygiene +: Automatic flushing of system with water, includes auto water drain. Details on request.

Hygiene+: UV sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.
 

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

Spare filter cartridge: #ZUK9700040

Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.

0.00 KZT

The Ziegra ZBE 150-100 ice machine makes up to 150kg of flake ice in one of two sizes. It sits on a B100 upright ice storage bin, which stores 100kg of ice ready for use. The ice machine has a B type ice discharge / level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

 

  • 150 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction