ZIEGRA

Main | Products "ZIEGRA"

Products "ZIEGRA"

Ziegra Eismaschinen GmbH’ which is based near Hanover in Germany has been operating since 1957. Our extensive experience has made us one of the leading specialist companies in the world,  who deal exclusively with industrial ice machines and the technology associated with it.

More than 80 specialists work at ZIEGRA, concentrating on every aspect of ice. This experience along with our constant research and development make ZIEGRA the European benchmark for quality and innovation. To date, Ziegra ice machines are used in over 160 countries on all continents.

The machines are manufactured from high quality branded components from suppliers such as Bitzer, Bock, Danfoss, Siemens etc or produced by specialist companies in Germany.

Using state of the art technology, every Ziegra ice machine is manufactured and tested at the factory, during which comprehensive performance checks are carried out, before any machine is released for shipping.

We are one of the few manufacturers to offer all major commercial and industrial ice types including flake, scale, liquid and nugget. As well as our extensive range of standard ice machines, we also design and build ice machines to your bespoke requirements

The Ziegra ZBE 375-BK200 ice machine makes up to 375kg of flake ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated for low melting and the ice drops into a cart docked below by pulling a handle, thus elminating manual shovelling of ice from the bin.

 

  • 375 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra SWE 350TW makes 350kg per 24 hours of fresh water flake ice or 280kg per 24hrs of salt water ice. It is available in both standard UK and tropical versions.

 

  • 350 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply 1/2” BSP male thread   
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 350-SG300 ice machine makes up to 350kg of flake ice in one of two sizes and stores 300kg of ice ready for use.

 

  • 350 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 350-S280 ice machine makes up to 350kg of flake ice in one of two sizes. It sits on an S280 slope fronted ice storage bin, which stores 280kg of ice ready for use. The ice machine has a B type ice discharge / level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

  • 350 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾” BSP / 18mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 350-200 ice machine makes up to 350kg of flake ice in one of two sizes. It sits on a B200 upright ice storage bin, which stores 200kg of ice ready for use. The ice machine has a B type ice discharge / level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

  • 350 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 350-BK200 ice machine makes up to 350kg of flake ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated for low melting and the ice drops into a cart docked below by pulling a handle, thus elminating manual shovelling of ice from the bin.

 

  • 350 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 350 ice machine makes up to 350kg per 24 hours of flake ice in one of two sizes. The machine is easy to install requiring only positioning and connection to utilities. The standard machine is pre-commissioned in the factory and shipped ready to run.

  • 350 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra UBE 3500-2 ice machine makes up to 3500kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions.

 

  • 3500 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra UBE 3000 ice machine makes up to 3000kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions.

  • 3000 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304

 

0.00 KZT
  • 3000 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply 1/2” BSP   1" BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 250-K45 ice machine makes up to 250kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

 

  • 250 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 250-BK150 ice machine makes up to 250kg of flake ice per 24 hours into a 150kg elevated ice storage bin. The bin is fully insulated for low melting and the ice drops into a cart docked below by pulling a handle, thus elminating manual shovelling of ice from the bin.

 

  • 250 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 250-S280 ice machine makes up to 250kg of flake ice in one of two sizes. It sits on an S280 slope fronted ice storage bin, which stores 280kg of ice ready for use. The ice machine has a B type ice discharge / level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

 

  • 250 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE250-S130 ice machine makes up to 250kg of flake ice in one of two sizes. It sits on an S130 slope fronted ice storage bin, which stores 130kg of ice ready for use. The ice machine has a B type ice discharge / level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

 

  • 250 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 18 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT
  • 2500kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12 mm  22/25 mm PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction