Slaughter line cattle

Main | Engineering of slaughter houses | Slaughter line cattle

Slaughter line cattle

This type of track can be set up for

  • Pig
  • Sheep
  • Cattle

slaughter lines, in chambers, cutting plants, loading docks, walkways and refrigerated trucks.

RUNNING RAIL

Running rail consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

DETOURS

Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

  • 45° detours with 2 tracks
  • 90° detours with 2 tracks
  • 90° detours with 3 tracks

CURVES

Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

  • Radius 350 mm.
  • Placed underneath the sections where the rail needs to change directions.
  • There are two types: 45° curves and 90° curves.

 

HOLES

Places in the detours and used to choose the track the hook should move on to. They are made of a pallet, screwed onto the detour, with a nylon cord that is pulled to move the pallet and close one of the detour routes. In this way. when the hook reaches this point, it will only find one rail to move onto.

OPTIONAL: pneumatic power. A small pneumatic piston is included with the hole and. using a manual valve, the hole can be moved to open or close the track.

 

BRACE PLATES

Used to attach the rail to the secondary structure, and to keep them parallel with a gap of 18 mm between the two rails that make up the track. U-shaped, with a groove in the upper part for the support screws for the brace plate, with win screws on the lower part for the support bolts on the rail brace plate.

Made of L-2640 aluminium.

The distance between the brace plates for the track determines the load the track can support:

Gap between brace plates (mm) 1100 900 750 650 550
Max. load (Kg. /metre)   400 500 600 700 800

 

TYPE TOTAL  HEIGHT  TOTAL GAP BETWEEN THE STRUCTURE AND RAIL
Single 150 mm 110 mm
Single 240 mm 200 mm
Double 150 mm 110 mm
 Double 240 mm 200 mm
Double rail (to assemble on chains with an open square tube rail, handrails made of stainless steel)  240 mm 200 mm

          

SCREWS

All the elements that make up the dual rail systems are joined together with screws. There are two types:

  • Screws to support the brace plates and attach them to the supporting beams, made up of bolts that can be attached to the brace place and support beam. Aluminium nails and stainless steel screws.
  • Screws to support the rail and the brace plates, made of special screws that can be inserted into the rail groove and are tightened using a wrench. These screws are made of stainless steel.

BRACE PLATES FOR TRUCKS

Used to attach the rail to the truck, and to keep them parallel with a gap of 18 mm between the two rails that make up the track. U-shaped, with a groove in the upper part for the support screws for the brace plate, with wing screws on the lower part for the support bolts on the rail brace plate.

Made of AISI-304 stainless steel.

TYPE  TOTAL  HEIGHT TOTAL GAP BETWEEN THE STRUCTURE AND RAIL
Single 130 mm 90 mm
Double 130 mm 90 mm

       
       
TRUCK ENTRANCE

Consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminium alloy, with a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.

Places at the truck entrance, to be able to place the hooks on different levels within the truck.

0.00 KZT

Aerial rail support structure. All of the aerial rails (bleeding, slaughtering, chambers, passageways, etc.) are supported by a framework, hung between spacers.

Depending on the quantity and type of animal to be hung on the rails, the number of kilos/metre can be calculated to work out the correct framework for the structure, then the type of rails can be decided.

Made up of:

  • Tubular columns with plates to anchor them to the floor.
  • IPN profile rails, joined to the columns with grippers and joined to each other with connecting plates.
  • Supports for curved pieces.
  • Screws to attach the different parts together. This type of construction aboids the need for welding, which can often cause problems with rust between the joined parts.

Made of back steel with a hot-dip galvanised finish.
 

0.00 KZT

Metre of tubular track in galvanised steel, formed by a tube sections, welded to suspension side links which are fixed to the structure using screws and nails.

 

0.00 KZT

Ritual killing box for cattle

Used lo keep cattle still while they are slaughtered in accordance with halal ritual practices. Can also be used for the traditional sticking method of slaughter.

Technical details:

  • The animal arrives through a guillotine door at the back, which works using a pneumatic piston.
  • The inner pusher works using a hydraulic piston, and has 2 movements: it moves down onto the back of the animal and pushes it forwards, adapting to the length of the animal and ensuring the head is inserted through the bleed hole. There is an opening in the ceiling to stick the animal, if using the traditional sticking slaughter method.
  • The box can rotate by 180 degrees, powered by a hydraulic motor, which turns the animal face up.
  • Restraining brace for the animal's head, powered by a hydraulic piston, which locks the head in place and keeps it away from the neck, allowing the throat to be easily slit.
  • Hinged side door, powered by a hydraulic piston, which expels the animal.
  • The floor can be tilted, powered by a hydraulic piston, at the same time the expulsion door opens, which helps the carcass fall.
  • Control panel with manual switches that can operate all the machine movements.

Made of hot-dip galvanised steel. Protective equipment, other small elements and screws made of stainless steel.

 Options:

  • Adjustable machine
  • The machine can be mounted on a rotating plate, in order to better position the animal for slaughter.
  • The rotating plate works with hydraulic pistons.
0.00 KZT

Siutble for stunning sheep and hogs

  • Very easy installation and handling
  • Optimal adaption of stunning force due to several adjustable options
  • Storable adjustments
  • Memory space for up to 100.000 stunns
  • PC configurable
  • Adjustable to all national grids

Scope of Supply

  • Stunning transformator solo, without  Stunning gripper with standard output for traffic lights and PC - plug. (Order Nr.: 001 983 920)

 

0.00 KZT
  • Easy to handle
  • Safe to operate by double safety mechanism
  • Simple maintenance
  • Extremely low running costs (no cartridges)
  • Fast sequence of shots

Scope of Supply

EFA VB 225

(Order-No. 130 109 520)

0.00 KZT

High Performance stunner for cattles, horses and calves; for medium and large sized plants.

  • Easy to handle
  • Save to operate by double safety mechanism.
  • Simple maintance.
  • Extremly low running costs (no catridges).
  • Fast shot sequence.

Scope of Supply

EFA VB 315

(Order-No. 130 109 670)


Hose unit for annex to VB

(Order-No. 007 009 412)

0.00 KZT

High Performance stunner for cattles, horses and calves; for medium and large sized plants.

  • Easy to handle
  • Safe to operate by double safety mechanism
  • Simple maintenance
  • Extremely low running costs (no cartridges)
  • Fast sequence of shots

Scope of Supply

EFA VB 215

 (Order-No. 130 109 610) 

0.00 KZT

Used on the cattle slaughter lines to keep the animal in place while it is stunned.

Made up of:

  • Guillotine door open by pneumatic piston
  • Side door to remove the animal manual tilting through a pneumatic piston
  • Retractable floor, works using the same piston as the side exit door, with simultaneous tilting to help the carcass fall.
  • Made of hot-dip galvanised steel.

Options:

  • Head restraint.

System to restrain the head of the cattle inside the knocking box, while it is stunned 

Made up of:

  • Hinged upper gate that opens downwards to push the animal forward, which works with a hydraulic cylinder,
  • Hinged front gate in a V-shape, adapted to the neck of the carcass, which moves upwards to keep the animal’s neck in place, and works with a hydraulic cylinder.
  • Hydraulic power and electrical panel used to control the hydraulic mechanisms.

 

0.00 KZT

Used on the cattle slaughter lines to keep the animal in place while it is stunned.

Made up of:

  • Guillotine door counterweight type
  • Side door to remove the animal manual tilting
  • Retractable floor, manual, with simultaneous tilling to help the carcass fall.

Made of hot-dip galvanised steel.

AUTOMATIC

LM0Q9

Pneumatic piston

Manual tilting through a pneumatic piston

Retractable, works using the same piston as the side exit door, with simultaneous tilting to help the carcass fall.

 

 

 

 

 

 

 

 

 

 

Options:

Head restraint.

System to restrain the head of the cattle inside the knocking box, while it is stunned 

Made up of:

  • Hinged upper gate that opens downwards to push the animal forward, which works with a hydraulic cylinder,
  • Hinged front gate in a V-shape, adapted to the neck of the carcass, which moves upwards to keep the animal’s neck in place, and works with a hydraulic cylinder.
  • Hydraulic power and electrical panel used to control the hydraulic mechanisms.

 

0.00 KZT

Positioned in front of the knocking box to slow down the carcass as it falls.

  • With an anchoring plate that can be bolted to the floor with anchor bolts.
  • Made of hot-dip galvanised steel.

 

0.00 KZT

Used to raise stunned animals onto the bleed rail.

Description:

  • Closed 1 1/4"  chain circuit.
  • UPN-80 profile guides.
  • Pushers for the passageway, with 4 nylon wheels.
  • Electrical control panel.
  • Buttons to control the different mechanisms, with stop and start switches.

Made of galvanised steel.

 

0.00 KZT

Used to hoist up the animal from the box and onto the bleed rail.

Made up of:

  • Wire rope hoist:
  • Mounting bracket on the beam.
  • Special stainless steel hook for hanging the animal.

 

0.00 KZT

Cuts off hocks and trotters of hogs and sows suitable for medium and large sized plants.

  • Easy and safe to handle.
  • High cutting Speed.
  • Two-hand-control
  • High cutting force..

Scope of Supply

  • EFA Z 14 (Order-No. 008 005 000) 
0.00 KZT

Horn and leg cutter with high closing pressure for cattle; for medium and large sized plants.

  • High efficiency
  • Easy an safe to handle by anti-tie down controls
  • Cut close to the head for dehiding without problems
  • All external parts made of non corrosive material
  • Best suited for dehorning and cutting-off forelegs
  • Hydraulic unit either electrical- or air operated

Scope of Supply

  • EFA Z 12 (Order-No. 008 004 998) 
0.00 KZT