Steam and over heated water boiler

Main | Engineering of slaughter houses | Steam and over heated water boiler

Steam and over heated water boiler

Instant-type flash coil steam generator with double-wind coil, featuring 3 pass fire path for maximum yield. The coil-type steam generator is normally subject to a less restrictive regulatory regimen than traditional boilers. In Italy, the generator is exempted from the licensed operator requirement, the periodic inspection requirement and installation declaration.

technical description

  • Exempt from licensed operator (Italy only)
  • European pressure directive (PED) code design
  • Working pressure of 12 Atm
  • Removable water coil for easy maintenance
  • Double safety circuit
  • Accessories mounted on a single base
  • Vertical layout from 45 to 1000 Kg/h
  • Horizontal layout from 300 to 3000 Kg/h
0.00 KZT

500kg/h Clean Steam Generator

Distribution Loop for:

0.00 KZT

800kg/h Clean Steam Generator

Distribution Loop for:

0.00 KZT

450kg/h Clean Steam Generator and Reverse Osmosis

Distribution Loop for:

0.00 KZT

400kg/h Clean Steam Generator

Distribution Loop for:

0.00 KZT

Mounted on stand Exchanger

0.00 KZT

TDS Exchangers Overview

0.00 KZT

Dismounted Exchanger 

0.00 KZT

Condenser

0.00 KZT

Mounted on Truck Condenser

0.00 KZT

Technical data

  • Respects European environmental directives
  • Reduces up to 80% the production of nitrogen oxides Nox
  • Large furnace for increased radiation, low thermal gradient, and uniform smoke flow
  • Large evaporation chamber

Control panel with LCD display for Alarms:

  • Excess water hardness
  • High stack temperature
  • High pressure
  • Low water level

Controls the following optional accessories:

  • O2, CO2
  • Constant yield
  • Constant water level control system
  • Automatic blowdown and Salinity control
  • Steam, water and gas flow meter
  • Working pressure of 12, 15 or 18 bar
0.00 KZT

Steam boiler featuring traditional 2-pass fire tubes with straight-through dry-back furnace and a large water stock and evaporation chamber to satisfy peaks and uneven steam draw.

 Construction characteristics:

  • All accessories skid-mounted on the boiler
  • Spoilers in the fire-tubes for increased yield
  • Submerged-arc welding with internal rewelding
  • Fire-tubes expanded to tubesheets with certified process
  • 1 Manhole with autoclave-type cover on the top of the shell
  • 1 Hinged door on the rear turnaround box
  • 2 bolted access panels on the front turnaround box

 Standard accessories

  • 2 reflective water-level gauges with cock
  • 1 pressure gauge Diam 150 mm with 3-way cock for benchmark gauge
  • 1 check valve to protect the water inlet line
  • Manual cut-off valves for steam, water and drain
  • Counterflanges included in supply for all valves to simplify installation
0.00 KZT

Instant-type flash coil steam generator with double-wind coil, featuring 3 pass fire path for maximum yield. The coil-type steam generator is normally subject to a less restrictive regulatory regimen than traditional boilers. In Italy, the generator is exempted from the licensed operator requirement, the periodic inspection requirement and installation declaration.

Technical desription

  • Exempt from licensed operator (Italy only)
  • European pressure directive (PED) code design
  • Working pressure of 12 Atm
  • Removable water coil for easy maintenance
  • Double safety circuit
  • Accessories mounted on a single base
  • Vertical layout from 45 to 1000 Kg/h
  • Horizontal layout from 300 to 3000 Kg/h

 

0.00 KZT

Technical data

  • Respects European environmental directives
  • Reduces up to 80% the production of nitrogen oxides Nox
  • Large furnace for increased radiation, low thermal gradient, and uniform smoke flow
  • Large evaporation chamber

Control panel with LCD display for Alarms:

  • Excess water hardness
  • High stack temperature
  • High pressure
  • Low water level

Controls the following optional accessories:

  • O2, CO2
  • Constant yield
  • Constant water level control system
  • Automatic blowdown and Salinity control
  • Steam, water and gas flow meter
  • Working pressure of 12, 15 or 18 bar
0.00 KZT

Steam boiler featuring traditional 2-pass fire tubes with straight-through dry-back furnace and a large water stock and evaporation chamber to satisfy peaks and uneven steam draw.

 Construction characteristics:

  • All accessories skid-mounted on the boiler
  • Spoilers in the fire-tubes for increased yield
  • Submerged-arc welding with internal rewelding
  • Fire-tubes expanded to tubesheets with certified process
  • 1 Manhole with autoclave-type cover on the top of the shell
  • 1 Hinged door on the rear turnaround box
  • 2 bolted access panels on the front turnaround box

 Standard accessories

  • 2 reflective water-level gauges with cock
  • 1 pressure gauge Diam 150 mm with 3-way cock for benchmark gauge
  • 1 check valve to protect the water inlet line
  • Manual cut-off valves for steam, water and drain
  • Counterflanges included in supply for all valves to simplify installation
0.00 KZT