Labelling machines till 6000 bph

Labelling machines till 6000 bph

Base made of stainless steel with skeleton made of steel profiles

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device
The labelling unit consist of:
  • Group of self-adhesive labeling with stepper motor and a speed of distribution of 20, 40 m / min.
  • Maximum height 250 mm paper width up.
  • Label roll diameter up to 300 or 400 mm.

Stainless steel support column with precision adjustment of horizontal, vertical and overhead doors that allow a perfect alignment of the label on the container and, using digital indicators, a fast and accurate exchange format. Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber. The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment

Options

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.
The labelling unit consist of:
  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Pneumatic glue pump type “C 7” 
  • Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber.
  • The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment.

Options:

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Labelling machine type MEGA ADE is fully automatic and has been designed for the application of self-adhesive pressure sencitive labels on cylindrical and square shape container and/or shaped. Mega ADE installs different self-adhesive label dispensing heads chosen between the best Italian manufacturer, according to type of application, production speed and customer special requirements.


Model MEGA ADE features platforms that may be driven by pulleys, toothed belts, cams, electronic cams or brushless motors. 

  • Base made of stainless steel with skeleton made of steel profiles.
  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor

The labelling unit consist of:

  • Groups of self-adhesive labeling with stepper motor and a speed of distribution of 20, 40 m / min.
  • Maximum height 250 mm paper width up.
  • Label roll diameter up to 300 or 400 mm.
  • 6 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or square shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control according to input and output photocells
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.
The labelling unit consist of:
  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Pneumatic glue pump type “C 7” 
  • Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber.
  • The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment.

Options:

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 6 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 6 plates driven by greased gears or oil bath gears movement
  • 1 labels application on cylindrical containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 4 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 6 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 8 plates driven by greased gears or oil bath gears movement
  • Up to 3 labels application on cylindrical or shaped containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device
The labelling unit consist of:
  • Group of self-adhesive labeling with stepper motor and a speed of distribution of 20, 40 m / min.
  • Maximum height 250 mm paper width up.
  • Label roll diameter up to 300 or 400 mm.

Stainless steel support column with precision adjustment of horizontal, vertical and overhead doors that allow a perfect alignment of the label on the container and, using digital indicators, a fast and accurate exchange format. Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber. The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment

Options

  • Motor drive head of conveyor with fixed or variable speed (by inverter)
  • Automatic speed adjustment according to the input and output photocells
  • Protections against the accidents by stainless steel boards and Plexiglas boards according to “CE”regulations . Microswitch signalling the alarm for doors opening.
  • Printing unit with ink and perforating needle type or ink-jet.
  • Others on request
0.00 KZT

Base made of stainless steel with skeleton made of steel profiles.

  • Paneling and removable parts made of stainless steel
  • Conveyor belt and casing made of stainless steel
  • Stopping device in case of jamming.
  • Timing screw conveyor
  • The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device.

The labelling unit consist of:

  • Oscillating labels holding magazine, aluminum roll with horizontal strip gluing profiles.
  • Fingers unit with stainless steel blades comb for a direct transfer of the label on the container.
  • Fix label magazine with rotating glue pallets
  • 8 plates driven by greased gears or oil bath gears movement
  • 1 labels application on cylindrical containers

Options

  • Electronic containers counter
  • Centrally collected lubrication points
  • Automatic speed control (no container, minimum glue, no label)
  • Container bottle plates rotation by clutch brake system or stepper motors
  • Glue heater
  • Safety clutch on timing screw, infeed and outfeed star
  • Coding / dating device: inkjet, laser or hot-date stamping, perforation or heat transfer printing
  • Checking for label presence with reject devices
  • Vision system
  • Touch screen operator panel
  • Programmable logic controller
  • Shaped plates for shaped container or unstable containers
  • Turret electrical height adjustment
  • Cam with removable sections
0.00 KZT