Smoke Houses JetSmoke Kerres

Main | Meat and fish production |Sausages production | Smoke Houses JetSmoke Kerres

Smoke Houses JetSmoke Kerres

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes. In this closed JET SMOKE system the generated smoke is used in the best possible way. It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary. Your benefits:

  • Short smoking times
  • Higher Output
  • Energy saving
  • Low loss of weight
  • Absolute uniformity of the products
  • Hanging and lying loading of the trucks
  • Compatible for all smoking systems: wood chips, sawdust, closed system, friction smoke, liquid smoke

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

Universal smokehouse JetSmoke 2850 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

PLC K-Touch 4012

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Modular design 1 and 2 rows

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

Semi-continuous system

By combining smoke, thermal and cold treatment, especially small-caliber products can be produced very time efficiently in the semi-continuous system. Automated workflows increase production capacity and reduce operating costs. The loaded truck is put onto the automatic conveyor belt. From then on, the conveyor belt takes over and pushes the truck to the right position into the smoke chamber.

Semi-continues system

By activating the process control, the processing program is started. The unique KERRES hybrid air circulation ensures that shortest processing times are achieved. After the thermal treatment process, the space-saving lifting door between the thermal treatment area and the cooling zone gets automatically opened and the smoke trucks are driven into the chilling area.

Then the lifting door closes and the system can be re-loaded at the front, while the products are showered in the rear area and cooled down to packaging temperature.

 

Technical data

 

2850/2

2850/3

2850/4

2850/2x2

2850/5

2850/3x2

2850/4x2

Energy consumption

electricity kW steam kg

64,8

100

97,2

150

129,6

200

129,6

200

162

250

194,4

300

259,2

400

Stock length, mm (max.)

1000

1000

1000

1000

1000

1000

1000

Minimum room height, mm

3800

3800

3800

3800

3800

3800

3800

Capacity, kg

320-800

480-1200

640-1600

640-1600

800-2000

1000-2400

1300-3200

 

0.00 KZT

Universal smokehouse JetSmoke 2850/5 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

PLC K-Touch 4012

 

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Modular design 1 row

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

1 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Modular design 2 rows

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

2 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Semi-continuous system

By combining smoke, thermal and cold treatment, especially small-caliber products can be produced very time efficiently in the semi-continuous system. Automated workflows increase production capacity and reduce operating costs. The loaded truck is put onto the automatic conveyor belt. From then on, the conveyor belt takes over and pushes the truck to the right position into the smoke chamber.

By activating the process control, the processing program is started. The unique KERRES hybrid air circulation ensures that shortest processing times are achieved. After the thermal treatment process, the space-saving lifting door between the thermal treatment area and the cooling zone gets automatically opened and the smoke trucks are driven into the chilling area.

Then the lifting door closes and the system can be re-loaded at the front, while the products are showered in the rear area and cooled down to packaging temperature.

Semi-continues system

 

0.00 KZT

Universal smokehouse JetSmoke 2850/2 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

PLC K-Touch 4012

 

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Modular design 1 row

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

1 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Modular design 2 rows

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

2 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Semi-continuous system

By combining smoke, thermal and cold treatment, especially small-caliber products can be produced very time efficiently in the semi-continuous system. Automated workflows increase production capacity and reduce operating costs. The loaded truck is put onto the automatic conveyor belt. From then on, the conveyor belt takes over and pushes the truck to the right position into the smoke chamber.

By activating the process control, the processing program is started. The unique KERRES hybrid air circulation ensures that shortest processing times are achieved. After the thermal treatment process, the space-saving lifting door between the thermal treatment area and the cooling zone gets automatically opened and the smoke trucks are driven into the chilling area.

Then the lifting door closes and the system can be re-loaded at the front, while the products are showered in the rear area and cooled down to packaging temperature.

Semi-continues system

 

0.00 KZT

Universal smokehouse JetSmoke 2850/2 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

PLC K-Touch 4012

 

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Modular design 1 row

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

1 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Modular design 2 rows

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

2 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Semi-continuous system

By combining smoke, thermal and cold treatment, especially small-caliber products can be produced very time efficiently in the semi-continuous system. Automated workflows increase production capacity and reduce operating costs. The loaded truck is put onto the automatic conveyor belt. From then on, the conveyor belt takes over and pushes the truck to the right position into the smoke chamber.

By activating the process control, the processing program is started. The unique KERRES hybrid air circulation ensures that shortest processing times are achieved. After the thermal treatment process, the space-saving lifting door between the thermal treatment area and the cooling zone gets automatically opened and the smoke trucks are driven into the chilling area.

Then the lifting door closes and the system can be re-loaded at the front, while the products are showered in the rear area and cooled down to packaging temperature.

Semi-continues system

 

0.00 KZT

Universal smokehouse JetSmoke 2250 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

The fully automatic process control enables reliable production processes. 

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Our benefits:

  • you save energy
  • you need less sawdust
  • you have shorter smoking times
  • you have a lower loss of weight

At a glance:

  • drying, smoking, dry cooking, baking, cooking, air-conditioning, showering
  • integrated or separate smoke generator
  • four different sizes + modular design for big units
  • all kinds of smoking processes: hot smoking, intensive smoking, cold smoking
  • available for various heating methods: electricity, gas, oil, steam
  • environmentally friendly by „TA-Air"
  • floor passable, on request also for overhead trolley systems
  • easy to clean with integrated foam cleaning system
  • integrated bottom drainage
  • microprocessor-control, reliably repeatable processes
  • available as closed or exhaust air reduces circulation system
  • modular design: easy to install on the spot
  • sawdust smoke, friction smoke and liquid smoke
  • all smoking- and cooking-systems with the Hybrid Airflow Circulation System available.

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Technical data

Other kinds of heating methods on request. Subject to technical modifications.
* Units with sawdust smoke generator built into the door (RET-C-G).
** Units with friction smoke generator built into the door.(RET-C-RR).

 

0.00 KZT

Universal Smokehouse JS 1250 RET-C-RR KERRES

At а glance: 

  • environmental-friendly Ьу .TA-Air"
  • various smoke systems, sawdust smoke and liquid smoke
  • K-Touch 4012 in your national language
  • supplied with stainless-steel evaporator for
  • cold smoking processes as standard closed system, therefore low energy consumption and
  • lower loss of weight

Environmental-friendly and economical: The JET SMOKE-System 


JET SMOKE is а smoke circulation system, that reduces smoke emissions to the stationary levels - in fact way below them. The smoke is constantly regenerated via the smoke generator. The advantage: No fresh air enters the system and there is virtually по exhaust gas. This method ensures а particularly environmentally friendly and economical operation in all processes. 
ln This closed JET SMOKE system the generated smoke is used in the best possi­Ыe way.

lt stands for:

  • minimum energy requirements
  • environmental-friendliness
  • loss of weight as with conventional procedures

ln contrast to ореп systems the requirement of smoking materials for the closed JET SMOKE-System is up to 40% lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary. 

0.00 KZT

Universal Smokehouse JS 1250 RET-C-G KERRES

At а glance: 

  • environmental-friendly Ьу .TA-Air"
  • various smoke systems, sawdust smoke and liquid smoke
  • K-Touch 4012 in your national language
  • supplied with stainless-steel evaporator for
  • cold smoking processes as standard closed system, therefore low energy consumption and
  • lower loss of weight

Environmental-friendly and economical: The JET SMOKE-System 


JET SMOKE is а smoke circulation system, that reduces smoke emissions to the stationary levels - in fact way below them. The smoke is constantly regenerated via the smoke generator. The advantage: No fresh air enters the system and there is virtually по exhaust gas. This method ensures а particularly environmentally friendly and economical operation in all processes. 
ln This closed JET SMOKE system the generated smoke is used in the best possi­Ыe way.

lt stands for:

  • minimum energy requirements
  • environmental-friendliness
  • loss of weight as with conventional procedures

ln contrast to ореп systems the requirement of smoking materials for the closed JET SMOKE-System is up to 40% lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary. 

0.00 KZT

Universal smokehouse JetSmoke 2250 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

The fully automatic process control enables reliable production processes. 

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Our benefits:

  • you save energy
  • you need less sawdust
  • you have shorter smoking times
  • you have a lower loss of weight

At a glance:

  • drying, smoking, dry cooking, baking, cooking, air-conditioning, showering
  • integrated or separate smoke generator
  • four different sizes + modular design for big units
  • all kinds of smoking processes: hot smoking, intensive smoking, cold smoking
  • available for various heating methods: electricity, gas, oil, steam
  • environmentally friendly by „TA-Air"
  • floor passable, on request also for overhead trolley systems
  • easy to clean with integrated foam cleaning system
  • integrated bottom drainage
  • microprocessor-control, reliably repeatable processes
  • available as closed or exhaust air reduces circulation system
  • modular design: easy to install on the spot
  • sawdust smoke, friction smoke and liquid smoke
  • all smoking- and cooking-systems with the Hybrid Airflow Circulation System available.

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Technical data

Other kinds of heating methods on request. Subject to technical modifications.
* Units with sawdust smoke generator built into the door (RET-C-G).
** Units with friction smoke generator built into the door.(RET-C-RR).

 

0.00 KZT

Universal smokehouse JetSmoke 1950 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

The fully automatic process control enables reliable production processes. 

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Our benefits:

  • you save energy
  • you need less sawdust
  • you have shorter smoking times
  • you have a lower loss of weight

At a glance:

  • drying, smoking, dry cooking, baking, cooking, air-conditioning, showering
  • integrated or separate smoke generator
  • four different sizes + modular design for big units
  • all kinds of smoking processes: hot smoking, intensive smoking, cold smoking
  • available for various heating methods: electricity, gas, oil, steam
  • environmentally friendly by „TA-Air"
  • floor passable, on request also for overhead trolley systems
  • easy to clean with integrated foam cleaning system
  • integrated bottom drainage
  • microprocessor-control, reliably repeatable processes
  • available as closed or exhaust air reduces circulation system
  • modular design: easy to install on the spot
  • sawdust smoke, friction smoke and liquid smoke
  • all smoking- and cooking-systems with the Hybrid Airflow Circulation System available.

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Other kinds of heating methods on request. Subject to technical modifications.

* Units with sawdust smoke generator built into the door (RET-C-G).
** Units with friction smoke generator built into the door.(RET-C-RR).

 

0.00 KZT

Smoking- and cooking systems for industry

A variety of maximum performance for industrial companies

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

The fully automatic process control enables reliable production processes. 

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Our benefits:

  • you save energy
  • you need less sawdust
  • you have shorter smoking times
  • you have a lower loss of weight

At a glance:

  • drying, smoking, dry cooking, baking, cooking, air-conditioning, showering
  • integrated or separate smoke generator
  • four different sizes + modular design for big units
  • all kinds of smoking processes: hot smoking, intensive smoking, cold smoking
  • available for various heating methods: electricity, gas, oil, steam
  • environmentally friendly by „TA-Air"
  • floor passable, on request also for overhead trolley systems
  • easy to clean with integrated foam cleaning system
  • integrated bottom drainage
  • microprocessor-control, reliably repeatable processes
  • available as closed or exhaust air reduces circulation system
  • modular design: easy to install on the spot
  • sawdust smoke, friction smoke and liquid smoke
  • all smoking- and cooking-systems with the Hybrid Airflow Circulation System available.

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

 

Other kinds of heating methods on request. Subject to technical modifications.
* Units with sawdust smoke generator built into the door (RET-C-G).
** Units with friction smoke generator built into the door.(RET-C-RR).

 

0.00 KZT

Universal smokehouse JetSmoke 1250 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

The fully automatic process control enables reliable production processes. 

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Our benefits:

  • you save energy
  • you need less sawdust
  • you have shorter smoking times
  • you have a lower loss of weight

At a glance:

  • drying, smoking, dry cooking, baking, cooking, air-conditioning, showering
  • integrated or separate smoke generator
  • four different sizes + modular design for big units
  • all kinds of smoking processes: hot smoking, intensive smoking, cold smoking
  • available for various heating methods: electricity, gas, oil, steam
  • environmentally friendly by „TA-Air"
  • floor passable, on request also for overhead trolley systems
  • easy to clean with integrated foam cleaning system
  • integrated bottom drainage
  • microprocessor-control, reliably repeatable processes
  • available as closed or exhaust air reduces circulation system
  • modular design: easy to install on the spot
  • sawdust smoke, friction smoke and liquid smoke
  • all smoking- and cooking-systems with the Hybrid Airflow Circulation System available.

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

 

Other kinds of heating methods on request. Subject to technical modifications.
* Units with sawdust smoke generator built into the door (RET-C-G).
** Units with friction smoke generator built into the door.(RET-C-RR).

 

0.00 KZT

Universal smokehouse JetSmoke 2850 KERRES

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

PLC K-Touch 4012

 

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Modular design 1 row

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

1 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Modular design 2 rows

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

2 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Semi-continuous system

By combining smoke, thermal and cold treatment, especially small-caliber products can be produced very time efficiently in the semi-continuous system. Automated workflows increase production capacity and reduce operating costs. The loaded truck is put onto the automatic conveyor belt. From then on, the conveyor belt takes over and pushes the truck to the right position into the smoke chamber.

By activating the process control, the processing program is started. The unique KERRES hybrid air circulation ensures that shortest processing times are achieved. After the thermal treatment process, the space-saving lifting door between the thermal treatment area and the cooling zone gets automatically opened and the smoke trucks are driven into the chilling area.

Then the lifting door closes and the system can be re-loaded at the front, while the products are showered in the rear area and cooled down to packaging temperature.

Semi-continues system

Technical data

 

2850/2

2850/3

2850/4

2850/2x2

2850/5

2850/3x2

2850/4x2

Energy consumption

electricity kW steam kg

64,8

100

97,2

150

129,6

200

129,6

200

162

250

194,4

300

259,2

400

Stock length, mm (max.)

1000

1000

1000

1000

1000

1000

1000

Minimum room height, mm

3800

3800

3800

3800

3800

3800

3800

Capacity, kg

320-800

480-1200

640-1600

640-1600

800-2000

1000-2400

1300-3200

 

0.00 KZT