Машины нарезки кубиками полосками

Машины нарезки кубиками полосками

Многофункциональный дайсер идеально подходит для нарезки мяса, сыра, овощей, фруктов, яиц, рыбы и множества других продуктов.

  • Самый сильный аппарат своего класса
  • Мощность двигателя 2,6 кВт
  • Непревзойденные гидравлические характеристики - более чем в два раза больше гидравлического масла, чем у эквивалентного дайсера другого производителя 
  • Длина резки - 45 мм, бесступенчатая регулировка
  • Высокая производительность - до 560 резов в минуту
  • Длинные решетчатые лезвия - обеспечивают самый чистый разрез сквозь мясо и сухожилия, чтобы получить отдельные кубики с идеальными краями по всему периметру резки
  • Гигиеническая дверь для чистой работы вокруг - измельченные продукты не могут упасть на пол
  • Тележка для накопления продукта на колесиках
0.00 KZT

The All-rounder with the big chamber volume is perfectly suited for the cutting of meat, cheese, vegetables, fruit, eggs, fish and a variety of other products. The extra-long working chamber provides high throughput with minimal preparatory work.

  • Strongest Dicer of its class - motor power of 2,6 kW
  • Unmatched hydraulic performance - more than double oil-volume as equivalent Dicer
  • Unbelievable cutting length - 45 mm infinitely adjustable
  • High throughput - up to 560 cuts per minute
  • Extremely long grid blades - provide cleanest cut through meat and sinews to give separate cubes with perfect edges all-round
  • Hygiene door for clean work all around - the cutting products cannot fall to the ground
  • Mobile on castors

TECHNICAL DATA DICR classic 90+

throughput

kg/h

max. 1250

connected load

kW

3,1

chamber size

mm

90 x 90 x 530

 

inch

(39/16 x 39/16 x 207/8)

grid set´s cross section

mm (inch)

90 x 90 (39/16 x 39/16)

cutting length

mm (inch)

0 - 45 (0 - 13/4)

length x width x height

mm

1700 x 660 x 1115

weight

kg

300

 

0.00 KZT

The Meat Specialist - whether red meat or poultry, fresh or frozen, the unique 4-sided pre-compression of this Dicer guaranteed highest cutting quality

  • Strongest Dicer of its class - motor power of 2,6 kW
  • Unmatched hydraulic performance - more than double oil-volume as equivalent Dicers
  • Unbelievable cutting length - 45 mm infinitely adjustable
  • High throughput Dicer - up to 560 cuts per minute
  • Extremely long grid blades - Dicer provide cleanest cut through meat and sinews to give separate cubes with perfect edges all-round
  • Hygiene door for clean work all around the Dicer - the cutting products cannot fall to the ground
  • Mobile on castors - Dicer is equipped with steering roller

TECHNICAL DATA DICR classic 96

throughput

kg/h

max. 1100

connected load

kW

3,1

chamber size

mm

96 x 96 x 310

 

inch

(325/32 x 325/32 x 127/32)

grid set´s cross section

mm (inch)

90 x 90 (39/16 x 39/16)

cutting length

mm (inch)

0 - 45 (0 - 13/4)

4-side pre-compression

 

X

length x width x height

mm

1300 x 660 x 1115

weight

kg

260

0.00 KZT

The Meat Specialist with big chamber - whether red meat or poultry, fresh or frozen, the unique 4-sided pre-compression guaranteed highest cutting quality. The extra-long working chamber provides high throughput with minimal preparatory work.

 

  • Strongest Dicer of its class - motor power of 2,6 kW
  • Unmatched hydraulic performance - more than double oil-volume as equivalent Dicer
  • Unbelievable cutting length - 45 mm infinitely adjustable
  • High throughput - up to 560 cuts per minute
  • Extremely long grid blades - provide cleanest cut through meat and sinews to give separate cubes with perfect edges all-round 
  • Hygiene door for clean work all around - the cutting products cannot fall to the ground 
  • Mobile on castors

 

TECHNICAL DATA DICR classic 96+

throughput

kg/h

max. 1400

connected load

kW

3,1

chamber size

mm

96 x 96 x 530

 

inch

(325/32 x 325/32 x 207/8)

grid set´s cross section

mm (inch)

90 x 90 (39/16 x 39/16)

cutting length

mm (inch)

0 - 45 (0 - 13/4)

4-side pre-compression

 

X

length x width x height

mm

1700 x 660 x 1115

weight

kg

300

 

0.00 KZT

The All-rounder perfect for slicing meats, cheeses, vegetables, fruits, eggs, fish and a variety of other products. The extra-long working chamber provides high throughput with minimal preparatory work.

Extremely versatile machine equipment:

  • Machine operation via PLC with color touch screen or via mechanical switches
  • Effortless loading by integrated lift for Euro boxes optional
  • Continuous product discharge by means of outfeed conveyor or direct product outlet into Euro box on roller cart
  • Minimal space requirement due to modern and compact machine design
  • Impressive throughput based on fast speeds of up to 300 cuts per minute in stepwise and 400 cuts per minute in continuous single blade operation
  • Infinitely variable setting of pre-compression and knife speed as well as pressure monitoring optional
  • Generously dimensioned pre-filling and working chamber
  • Designed for the toughest workloads and equipped with solid stainless steel grid sets driven by ball-bearing slide elements
  • Highest standard of hygiene thanks to fully welded machine frame and cutting chamber with drain pipe

TECHNICAL DATA DICR comfort 105

throughput

kg/h

max. 1.900

connected load

kW

4,8 – 12,1

chamber size

mm

105 x 105 x 530

 

inch

(41/8 x 41/8 x 207/8)

grid set´s cross section

mm (inch)

105 x 105 (41/8 x 41/8)

cutting length

mm (inch)

0 - 45 (0 - 13/4)

length x width x height

-       - outfeed into boxes (with lift)
-       - outfeed conveyor (with lift)

mm

 

1800 (2251) x 753 (822) x 1066
1688 (2140) x 686 (779) x 1066

weight

kg

525 - 590

 

0.00 KZT

The Expert for meat with big chamber - whether meat or poultry, fresh or frozen, the unique 4-sided pre-compression guarantees high cutting quality. The extra-long working chamber provides high throughput with minimal preparatory work.

Extremely versatile machine equipment:

  • Machine operation via PLC with color touch screen or via mechanical switches
  • Effortless loading by integrated lift for Euro boxes optional
  • Continuous product discharge by means of outfeed conveyor or direct product outlet into Euro box on roller cart
     
  • Minimal space requirement due to modern and compact machine design
  • Impressive throughput based on fast speeds of up to 300 cuts per minute in stepwise and 400 cuts per minute in continuous single blade operation
  • Infinitely variable setting of pre-compression and knife speed as well as pressure monitoring optional
  • Generously dimensioned pre-filling and working chamber
  • Designed for the toughest workloads and equipped with solid stainless steel grid sets driven by ball-bearing slide elements
  • Highest standard of hygiene thanks to fully welded machine frame and cutting chamber with drain pipe

TECHNICAL DATA DICR COMFORT 112

throughput

kg/h

max. 2.100

4-side pre-compression

 

included

connected load

kW

4,8 – 12,1

chamber size

mm

112 x 112 x 530

 

inch

(413/32 x 413/32 x 207/8)

grid set´s cross section

mm (inch)

105 x 105 (41/8 x 41/8)

cutting length

mm (inch)

0 - 45 (0 - 13/4)

length x width x height

-       - outfeed into boxes (with lift)

-       - outfeed conveyor (with lift)

mm

 

1800 (2251) x 753 (822) x 1066
1688 (2140) x 686 (779) x 1066

weight

kg

525 – 590

 

0.00 KZT

The Versatile Multipurpose dicer is perfect for cutting large amounts of sausage, cheese, meat or fish into cubes, strips, slices or shreds

Unrivaled big cutting chambers provide cost minimization twice:

  • - Substantial time saving, because annoying pre-cutting is minimized
  • - Huge chamber volumes of up to 10.8 liters allows to cut more product per cycle

Numerous equipment variants available:

  • PLC with touch screen and color display or mechanical control
  • Low loading requirements thanks to lifting device for 200-liter trolleys or integrated lift for Euro boxes 
  • Discharge of cut products via outfeed conveyor or direct product outlet in 200-liter trolleys
     
  • Powerful hydraulic system as well as high-performance grid drives with ball-bearing sliding elements for particularly high loads
  • Continuously adjustable knife speed with up to 400 cuts per minute available in single knife operation
  • Extra solid stainless steel grid sets with four times fastening for hardest workload
  • Pressure monitoring with infinitely variable pre-pressure control available
  • Perfect hygiene and easy cleaning due to sloping surfaces as well as drain pipe in the working chamber

TECHNICAL DATA DICR CAPACITY 120

throughput

kg/h

max. 2.400

connected load

kW

6,5 – 12,7

chamber size

mm

120 x 120 x 550

 

inch

(43/4 x 43/4 x 215/8)

grid set´s cross section

mm (inch)

120 x 120 (43/4 x 43/4)

cutting length

mm (inch)

0 - 40 (0 – 19/16)

length x width x height

-       - outfeed conveyor (lift E-box)

-       - on platform

mm

 

1814 (2258) x 750 (820) x 1224
2185 x 1203 x 1594

weight

kg

600 – 650

 

0.00 KZT

The Meat Professional - whether red meat or poultry, fresh or frozen, the unique 4-sided pre compression guaranteed highest cutting quality

Unrivaled big cutting chambers provide cost minimization twice:

  • Substantial time saving, because annoying pre-cutting is minimized
  • Huge chamber volumes of up to 10.8 liters allows to cut more product per cycle

Numerous equipment variants available:

  • PLC with touch screen and color display or mechanical control
  • Low loading requirements thanks to lifting device for 200-liter trolleys or integrated lift for Euro boxes 
  • Discharge of cut products via outfeed conveyor or direct product outlet in 200-liter trolleys
     
  • Powerful hydraulic system as well as high-performance grid drives with ball-bearing sliding elements for particularly high loads
  • Continuously adjustable knife speed with up to 400 cuts per minute available in single knife operation
  • Extra solid stainless steel grid sets with four times fastening for hardest workload
  • Pressure monitoring with infinitely variable pre-pressure control available
  • Perfect hygiene and easy cleaning due to sloping surfaces as well as drain pipe in the working chamber

TECHNICAL DATA DICR CAPACITY 126

throughput

kg/h

max. 2.600

connected load

kW

6,5 – 12,7

chamber size

mm

126 x 126 x 550

 

inch

(413/32 x 413/32 x 215/8)

grid set´s cross section

mm (inch)

120 x 120 (43/4 x 43/4)

cutting length

mm (inch)

0 - 40 (0 – 19/16)

length x width x height

-       - outfeed conveyor (lift E-box)

-       - on platform

mm

 

1814 (2258) x 750 (820) x 1224
2185 x 1203 x 1594

weight

kg

600 – 650

 

0.00 KZT

Largest semi-automatic Dicer on the market - with a huge working chamber of about 10 liters enormous amounts can be cut in a very short time, almost without preparation

Unrivaled big cutting chambers provide cost minimization twice:

  • Substantial time saving, because annoying pre-cutting is minimized
  • Huge chamber volumes of up to 10.8 liters allows to cut more product per cycle

Numerous equipment variants available:

  • PLC with touch screen and color display or mechanical control
  • Low loading requirements thanks to lifting device for 200-liter trolleys or integrated lift for Euro boxes 
  • Discharge of cut products via outfeed conveyor or direct product outlet in 200-liter trolleys
     
  • Powerful hydraulic system as well as high-performance grid drives with ball-bearing sliding elements for particularly high loads
  • Continuously adjustable knife speed with up to 400 cuts per minute available in single knife operation
  • Extra solid stainless steel grid sets with four times fastening for hardest workload
  • Pressure monitoring with infinitely variable pre-pressure control available
  • Perfect hygiene and easy cleaning due to sloping surfaces as well as drain pipe in the working chamber

TECHNICAL DATA DICR CAPACITY 126

throughput

kg/h

max. 3.100

connected load

kW

6,5 – 12,7

chamber size

mm

140 x 140 x 550

 

inch

(51/2 x 51/2 x 215/8)

grid set´s cross section

mm (inch)

140 x 140 (51/2 x 51/2)

cutting length

mm (inch)

0 - 40 (0 – 19/16)

length x width x height

-       - outfeed conveyor (lift E-box)

-       - on platform

mm

 

1814 (2258) x 750 (820) x 1224
2185 x 1203 x 1594

weight

kg

600 – 650

 

0.00 KZT

The All-rounder - is ideal for cutting poultry, red meat, sausage or cheese blocks without precutting thanks to the automatic cross knife

  • Consistent high throughput - strong hydraulic system and massive dimensioned grid drives
  • Meet the highest possible hygiene standards - completely welded machine frame with slanting surfaces and drain pipes
  • Flexible product outfeed through integrated outfeed conveyor or directly into 200 liter trolley
  • Excellent cutting quality with fresh meat grid sets

Unlimited versatility for product infeed

  • easy loading by hand using the excellent double chamber system
  • fully automatic loading via hopper
  • infeed conveyor for blocks or calibrated products
     
  • Extra user-friendly control units - simple adjustment of all cutting parameters via single control keys allowing less break-in period
  • Low maintenance costs - electronic soft-start reduces the load onto drives and increases the lifetime of wear parts

TECHNICAL DATA CROZZDICR CLASSIC 120 

throughput

kg/h

max. 3.000

connected load

kW

6,5 – 8,5

chamber size

mm

120 x 120

 

inch

(43/4 x 43/4)

chamber length

mm (inch)

620 (2121/32)

cutting length

mm (inch)

0 - 50 (0 – 131/32)

length x width x height

mm

2265 x 950 x 1200

weight

kg

700

0.00 KZT

The Expert for cutting meat - continuous feeding and processing of fresh or chilled red meat or poultry thanks to the automatic side pre-compression and cross knife

  • Consistent high throughput - strong hydraulic system and massive dimensioned grid drives
  • Meet the highest possible hygiene standards - completely welded machine frame with slanting surfaces and drain pipes
  • Flexible product outfeed through integrated outfeed conveyor or directly into 200 liter trolley
  • Excellent cutting quality with fresh meat grid sets

Unlimited versatility for product infeed

  • easy loading by hand using the excellent double chamber system
  • fully automatic loading via hopper
  • infeed conveyor for blocks or calibrated products
     
  • Extra user-friendly control units - simple adjustment of all cutting parameters via single control keys allowing less break-in period
  • Low maintenance costs - electronic soft-start reduces the load onto drives and increases the lifetime of wear parts

TECHNICAL DATA CROZZDICR CLASSIC 120+

throughput

kg/h

max. 3.200

connected load

kW

9,5 – 11,5

chamber size

mm

220 x 120

 

inch

(811/16 x 43/4)

chamber length

mm (inch)

620 (2121/32)

cutting length

mm (inch)

0 - 50 (0 – 131/32)

side pre-compression

 

variable

length x width x height

mm

2265 x 950 x 1200

weight

kg

1050

 

0.00 KZT

The Power Machine with high flexibility - the DICETRONIC® guarantees highest quality and huge throughputs for cutting poultry, red meat, 
sausage or cheese blocks

  • DicetroniC® for superior cutting results, user- friendly machine operation and huge performance:
  • Perfect overview about all cutting parameters and easy data input - big screen with touch control
  • High flexibility and versatility at choice of cutting products - huge variety at cutting programs and own programming
  • Utmost cutting accuracy with maximum hygiene at product area - integrated measuring system for piston positioning
  • Unique system for feed length control with extreme high precision - electronic controlled way-valve
  • Powerful drive technology for cutting system and hydraulic system allows high throughput rates - slice-cut knife speed up to 400 rpm at maximum feed rates
  • Perfect adaptation to the cutting product - separate drives with individually adjustable speed   for slice-cut knife and grid sets
  • Optimum product yield - automatic end-piece management and first-cut control

TECHNICAL DATA CROZZDICR COMFORT 120

throughput

kg/h

max. 3.400

connected load

kW

12 – 14,5

chamber size

mm

120 x 120

 

inch

(43/4 x 43/4)

chamber length

mm (inch)

620 (2121/32)

cutting length

mm (inch)

0 - 50 (0 – 131/32)

side pre-compression

 

variable

length x width x height

mm

2265 x 950 x 1200

weight

kg

950

 

0.00 KZT

The Master in cutting meat - the DICETRONIC® ensures highest quality and huge cutting efficiency for meat and poultry. The automatic side pre-compression allows fully automatic loading of large fresh meat products or slightly frozen blocks

DicetroniC® for superior cutting results, user- friendly machine operation and huge performance:

  • Perfect overview about all cutting parameters and easy data input - big screen with touch control
  • High flexibility and versatility at choice of cutting products - huge variety at cutting programs and own programming
  • Utmost cutting accuracy with maximum hygiene at product area - integrated measuring system for piston positioning
  • Unique system for feed length control with extreme high precision - electronic controlled way-valve
  • Powerful drive technology for cutting system and hydraulic system allows high throughput rates - slice-cut knife speed up to 400 rpm at maximum feed rates
  • Perfect adaptation to the cutting product - separate drives with individually adjustable speed for slice-cut knife and grid sets
  • Optimum product yield - automatic end-piece management and first-cut control

TECHNICAL DATA CROZZDICR COMFORT 120+

throughput

kg/h

max. 3.600

connected load

kW

14 – 16,2

chamber size

mm

220 x 120

 

inch

(811/16 x 43/4)

chamber length

mm (inch)

620 (2121/32)

cutting length

mm (inch)

0 - 50 (0 – 131/32)

side pre-compression

 

variable

length x width x height

mm

2265 x 1050 x 1200

weight

kg

1200

 

0.00 KZT

The Power-pack is perfect for cutting large amounts of meat or poultry into cubes, strips or slices

  • Fully automatic loading and continuous processing of all meat products
  • Hydraulic lifting device for 200 litre trolleys or infeed conveyor belt

Gigantic throughput rate in non-stop operation

  • huge infeed hopper
  • enormous chamber size
  • horizontal cutting guillotine cross knife
  • rapid slice-cut knife speed

Clean solution - exemplary hygiene and easy cleaning

Superior cutting quality for cubes and strips

  • optimum compaction of the meat through the lateral pre-compression with double-hydraulic drive
  • adjustable longitudinal pre-compression depending on cutting product
  • separate working slice-cut knife drive with infinitely variable speed
  • accurate and precise cutting length adjustment - computer controlled

TECHNICAL DATA CROZZDICR CAPACITY 120

throughput

kg/h

max. 3.200

connected load

kW

11,3

chamber size

mm

220 x 120

 

inch

(811/16 x 43/4)

chamber length

mm (inch)

620 (2121/32)

cutting length

mm (inch)

0 - 50 (0 – 131/32)

side pre-compression

 

variable

length x width x height

mm

3500 x 1505 x 2065

weight

kg

1700

 

0.00 KZT

The Top Performer in meat processing with enormous throughput rates of up to 4 tons per hour in continuous operation

  • Fully automatic loading and continuous processing of all meat products
  • Hydraulic lifting device for 200 litre trolleys or infeed conveyor belt
  • Large LCD Display with touch screen, and 99 cutting programs
  • Optimum product yield through automatic distribution of the remaining piece - reduces leftovers to a minimum
  • Mechanical installation-device for cutting tools

Gigantic throughput rate in non-stop operation

  • huge infeed hopper
  • enormous chamber size
  • horizontal cutting guillotine cross knife
  • rapid slice-cut knife speed

Clean solution - exemplary hygiene and easy cleaning

Superior cutting quality for cubes and strips

  • optimum compaction of the meat through the lateral pre-compression with double-hydraulic drive
  • adjustable longitudinal pre-compression depending on cutting product
  • separate working slice-cut knife drive with infinitely variable speed
  • accurate and precise cutting length adjustment - computer controlled

TECHNICAL DATA CROZZDICR CAPACITY 150

throughput

kg/h

max. 4.000

connected load

kW

15,3

chamber size

mm

250 x 150

 

inch

(927/32 x 529/32)

chamber length

mm (inch)

620 (2121/32)

cutting length

mm (inch)

0 - 60 (0 – 23/8)

side pre-compression

 

Variable

length x width x height

mm

3500 x 1785 x 2330

weight

kg

2100

 

0.00 KZT
Мультилинии производства макаронных изделий

Мультилинии производства макаронных изделий