Варочные камеры

With a horizontal air circulation for all products which are treated in a lying position.

  • Drying
  • Smoking
  • Dry Cooking
  • Baking
  • Cooking
  • Sterilizing
  • Cooling

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Improving gently. Acting environmental-friendly and economically. Selling successfully

Fish products need a different processing than meat products. Salmon, trout, herring - and mackerel fillets for example, have to be placed in a lying position on grates or plates. Kerres has developed a smoking system which meets these special requirements: The Fishsmoker System.

During the improvement of fish, poultry and other kinds of food, which have to be treated in a lying position, the horizontal air circulation system provides a consistent treatment atmosphere inside the chamber and ensures even drying results within the entire batch also with maximum yields.

Your benefits:

  • energy saving mode of operation
  • low sawdust consumption
  • short smoking times
  • low loss of weight
  • high utilization

K-Touch 4012

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Technical data

Technical data for single-truck

H-1950/1

H-2250/1

H-2850/1

H-2850/2

H-2850/3

H-2850/4

Dimensions cm, w x d x h (with door)

1590 x 1060 x 2600

1680 x 1060 x 2900

1680 x 1170 x 3200

1680 x 2350 x 3200

1680 x 3450 x 3200

1680 x 4550 x 3200

Energy consumption kW electricity

24,6

30,0

35,4

70,8 +100*

106,2 +150*

141,6 +200*

Smoke truck sizes

1010 x 910 x 1500

1010 x 910 x 1700

1010 x 1010 x 2000

Stock length mm

900

900

1000

Capacity smoke truck

Depending on the product type

*- Steam Kg

Subject to technical modifications. (connected loads on request) and as multi-truck chambers. Heating methods Electricity- Steam (HP/LP)- Oil- Gas

0.00 KZT

Showering and Intensive Coolinghouses IKK 2850 

The KERRES Showering and Intensive Coolinghouses stand for modern and efficient production processes and minimum product cycle times. Immediately after the thermal treatment of meat, sausages and other kinds of food the product can be cooled down to a requested core temperature and packed. The air is cooled down in the circulation process. This process is monitored and controlled by a microprocessor. 

At a glance

  • microprocessor-controlled cooling conditions
  • ready to plug in delivery ex works - fast installation the spot
  • 1 -truck to 6-truck units
  • microprocessor control K-Touch 4012 available in many languages
  • cooling down to 6 °C core temperature possible
  • stainless steel evaporator
  • all current coolants usable 

Your benefits:

  • minimum loss of temperature and minimum loss of weight
  • short cycle times by immediately ready to pack products
  • saving of cooling surfaces and storage space
  • shelf life of product extended because of faster and monitored cooling down
  • increased slicability strength with cold cuts
  • attractive look of the products

Intensive cooling diagram

Intensive cooling diagram

Technical data

Technical data

IKK 2850/1

IKK 2850/2

IKK 2850/3

IKK 2850/4

IKK 2850/5

IKK 2850/6

Dimensions, mm, w x d x h

1680x1170x2800

1680x2270x2800

1680x3360x2800

1680x4470x2800

1680x5570x2800

1680x6650x2800

Smoke truck mm

1010 x 1030x2020

Electric connection kW

4

7

10

14

16

20

Refrigerating capacity kW/kcal

18

36

54

72

90

108

Stock length mm

1000

Capacity kg Technical data

160-400

320-800

480-1200

640-1600

800-2000

1000-2400

0.00 KZT

Baking- and Roastinghouses BK-H 1950 - 2850 with horizontal airflow

Whether baking or roasting of meat, sausages or other kinds of food: the KERRES baking- and roastinghouses provide the right preparations for all requirements - microprocessor-controlled for repeatable product quality at any time.

At a glance

  • temperature range up to 200°C
  • ready to plug in modular design, future expandable
  • 1 -truck to 4-truck units
  • suited for both hanging products and products in a lying position
  • microprocessor control K-Touch 4012 available in many languages
  • all current heating methods
  • fribreglass upgraded insulation

Your benefits:

  • consistent temperature distribution inside the units thanks to the KERRES circulation technology with horizontal reversing circulation
  • time and energy saving with high quality fibreglass upgraded insulation
  • very low loss of weight with gentle treatment
  • high utilization especially with products in a lying position

K-Touch 4012

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Built-in microprocessor

Built-in microprocessor as standart with three cooking processes:

  • cooking via time
  • cooking via core temperature
  • coocking via Delta-T-process

Microprocessor shower

Cooking and roasting diagram

Cooking roasting diagram

Technical data

 

BK-H 1950/1

BK-H 2250/1

BK-H 2850/1

Dimensions, mm, wxdxh

1700x1060x2240

1680x1060x2500

1680x1170x2800

Roasting truck dimensions mm

1010 x910 x1500

1010 x910 x1700

1010 x1030x2020

Heating power EL kW/kcal

28,2

32,4

36

Numbers of stations / truck

11-13

13-16

16-20

Subject to technical specifications

0.00 KZT

At a glance:

  • ready to plug in delivery ex work-fast installation on the spot
  • modular design from 1-truck to 8-truck
  • robust stainless steel construction
  • fibreglass upgraded insulation
  • integrated steam generator
  • microprocessor control K-Touch 4012 available in many languages
  • all current heating methods

K-Touch 4012

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Built-in microprocessor

Built-in microprocessor as standart with three cooking processes:

  • cooking via time
  • cooking via core temperature
  • coocking via Delta-T-process

Technical data

 

KK2800/1

KK2800/2

KK2800/3

KK2800/4

KK2800/5

KK2800/6

KK2800/8

Dimensions mm w x d x h

1580 x 1270 x 2800

1580 x 2370 2800

1580 x 3470 x 2800

1580 x 4570 x 2800

1580 x 5570 x 2800

1580 x 6670 x 2800

1580 x 8870 x 2800

Cooking truck mm

1010 x 1030 x 2020

1010 x 1030 x 2020

1010 x 1030 x 2020

1010 x 1030 x 2020

1010 x 1030 x 2020

1010 x 1030 x 2020

1010 x 1030 x 2020

Electricity connection kW

26,3

52,5

78,5

104,6

130,9

156,8

209

Heating power El kW/kcal

Steam kg/h

 

25,2

50

 

50,4

100

 

75,6

150

 

100,8

200

 

126

250

 

151

300

 

201

400

Stock length, cm (max.)

100

100

100

100

100

100

100

Capacity, kg

160-400

320-800

480-1200

640-1600

800-2000

1000-2400

1300-3200 

 Subject to technical specifications

0.00 KZT

Smoking- and cooking systems for industry

A variety of maximum performance for industrial companies

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

The fully automatic process control enables reliable production processes. 

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Your benefits:

  • Short smoking times
  • Higher Output
  • Energy saving
  • Low loss of weight
  • Absolute uniformity of the products
  • Hanging and lying loading of the trucks
  • Compatible for all smoking systems:

wood chips, sawdust, closed system, friction smoke, liquid smoke

K-Touch 4012

K-touch panel Kerres

New developed touch screen control - and all processes always at sight

Some touches on the control panel are enough, then the microprocessor control automatically takes over: It constantly monitors and controls all the parameters and ensures a precise clima and repeatable, reliable processes.

  • Touch screen
  • Clear control
  • Simple operation
  • Microprocessor-controlled technology
  • PC networking
  • Documentation of processes
  • Stored programs are always reliable repeatable
  • Power failure protection

Modular design 1 row

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

1 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Modular design 2 rows

Various heating KERRES units are manufactured in modular design. They are flexibly designed and easily assembled. The robust stainless steel construction is CE tested. The Universal Smokehouse 2850 is available In various sizes and all current heating systems.

2 rowed

Available for: 

  • electricity            
  • steam                  
  • gas                     
  • oil

Available design:

  • 42" for USA (wide smoke trucks)
  • floor passable, 10 mm floor with lifting hinge

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Semi-continuous system

By combining smoke, thermal and cold treatment, especially small-caliber products can be produced very time efficiently in the semi-continuous system. Automated workflows increase production capacity and reduce operating costs. The loaded truck is put onto the automatic conveyor belt. From then on, the conveyor belt takes over and pushes the truck to the right position into the smoke chamber.

By activating the process control, the processing program is started. The unique KERRES hybrid air circulation ensures that shortest processing times are achieved. After the thermal treatment process, the space-saving lifting door between the thermal treatment area and the cooling zone gets automatically opened and the smoke trucks are driven into the chilling area.

Then the lifting door closes and the system can be re-loaded at the front, while the products are showered in the rear area and cooled down to packaging temperature.

Semi-continues system

Technical data

 

2850/2

2850/3

2850/4

2850/2x2

2850/5

2850/3x2

2850/4x2

Energy consumption

electricity kW steam kg

64,8

100

97,2

150

129,6

200

129,6

200

162

250

194,4

300

259,2

400

Stock length, mm (max.)

1000

1000

1000

1000

1000

1000

1000

Minimum room height, mm

3800

3800

3800

3800

3800

3800

3800

Capacity, kg

320-800

480-1200

640-1600

640-1600

800-2000

1000-2400

1300-3200

 

0.00 KZT

Smoking- and cooking systems for industry

A variety of maximum performance for industrial companies

The KERRES JET SMOKE universal smokehouses provide a constant quality - with all smoking processes and heat treatment methods. The smouldering of the sawdust in the separate smoke generator and the exact co-ordinated circulation in the smokehouse ensure first-class products.

The fully automatic process control enables reliable production processes. 

Environmental friendly and economical: The JET SMOKE System

JET SMOKE is a smoke circulating system which reduces the smoke emissions to the statutory levels - in fact below them. The smoke is continuously regenerated via the smoke generator. The benefit: the circulation system is sealed; no fresh air enters the system and there's virtually no exhaust gas. This method ensures a particularly environmental friendly and economical operation in all processes.

In this closed JET SMOKE system the generated smoke is used in the best possible way.

It stands for:

  • minimum energy requirements
  • environmental friendly
  • lower loss of weight as conventional procedures. 

In contrast to open systems the requirement of smoking materials for the JET SMOKE System is up to 40 % lower. Subsequent combustion units, smoke scrubbers or catalytic converters are unnecessary.

Our benefits:

  • you save energy
  • you need less sawdust
  • you have shorter smoking times
  • you have a lower loss of weight

At a glance:

  • drying, smoking, dry cooking, baking, cooking, air-conditioning, showering
  • integrated or separate smoke generator
  • four different sizes + modular design for big units
  • all kinds of smoking processes: hot smoking, intensive smoking, cold smoking
  • available for various heating methods: electricity, gas, oil, steam
  • environmentally friendly by „TA-Air"
  • floor passable, on request also for overhead trolley systems
  • easy to clean with integrated foam cleaning system
  • integrated bottom drainage
  • microprocessor-control, reliably repeatable processes
  • available as closed or exhaust air reduces circulation system
  • modular design: easy to install on the spot
  • sawdust smoke, friction smoke and liquid smoke
  • all smoking- and cooking-systems with the Hybrid Airflow Circulation System available.

Hybrid Airflow Circulation System

With the Hybrid Airflow Circulation System with air flaps for Universal Smokehouses you have the ability to control the direction of the airflow and reach faster processing times, higher product output, energy savings, less weight loss, and absolute uniformity throughout the final product. Perfect for product hung on sticks, or laid on screens. Throughout the world members of the KERRES family are cooking 38 screens of Beef Jerky at a time with absolute evenness throughout the entire truck.

 Airflow1

 Airflow2

 Airflow3

Technical data

 

JS 1250

 JS 1650

JS 1950

JS 2250

Dimensions mm, w x d x h

1270x1120*/1180*
*x2350*/2270**

1390x1130x2460

1590x1240x2570

1680x1250x2840

Smoke truck mm, w x d x h

910 x 780 x 1550

910 x 780 x 1550

1010 x 930 x 1550

1010 x 930 x 1750

Electric connection kW

16,2

17,8/18,5*/22,8**

24,6/25,6*/29,6**

30/31 */35**

Stock length cm (max.)

80

80 oder 90

90 oder 100

90 oder 100

Capacity kg

60-150

70-200

90-270

110-355

Other kinds of heating methods on request. Subject to technical modifications.
* Units with sawdust smoke generator built into the door (RET-C-G).
** Units with friction smoke generator built into the door.(RET-C-RR).

 

0.00 KZT

Quality criteria that make your work easier:

  • constant quality at all operating stages
  • user-friendly controls, maintenance and cleaning
  • robust stainless steel constructions
  • environmental-friendly
  • low energy consumption with the highest smoking quality
  • high operational safety
  • technology with a guaranteed future
  • easy and fast to install
  • minimum required space
  • instruction manual in your national language 
0.00 KZT

At a glance:

  • fully-automatic, external sawdust-smoke generator for crafts and industrial units
  • stainless stell construction
  • four different sizes
  • hot and cold smoking possible
  • suited to all kinds of sawdust with a graining of 1 to 6 mm

Your benefits:

  • user-friendly controls and cleaning
  • very fine smoke flavour with sawdust smouldering
  • microprocessor-controlled temperature monitoring

Technical data:

 

RE 201

RE 202

RE 203

RE 204

Dimensions w x d x h in mm:

55 x 96 x 152

55 x 96 x 152

85 x 130 x 183

85 x 130 x 183

electric connection: kW

0,8

1,2

1,5

2,8

range of application per unit / truck:

1

2

3

4-6

0.00 KZT

Equipment for after conditioning and ripening/maturing For conditioning and storing of pre-conditioned product:

  • unique 30 air circulation mixing unit can be placed in. behind or on top of the processing room
  • heating energy: warm water, electric, high or low pressure steam
  • cooling with: Freon / Frigen, Ammoniak, cold brine, glycol. R 64
  • steam generation through the humidity of the product itself and also through electrical steam generation, low pressure steam or water injection via nozzles
  • temperature range:  0 - +20C
  • relative humidity: from 76% - 80%
  • capacity / room size: up to 120 trolleys
  • step less speed control of the fan: air speed from 0.5 m/s - 3.0 m/s
  • step less control oft the changing flap motor
  • fully automatic outside air conditioning
  • cleaning through high pressure pump

Option

  • use of heat coming out of the cooling machine through installation of a additional heat exchanger

Advice for the practice: equipment for after conditioning should generally be 3-4 times bigger than the equipment for conditioning with smoke or the equipment for pre-conditioning.

 

0.00 KZT

For ripening/fermenting, drying, smoking and conditioning of raw sausage products, hams, meat, fish or cheese

  • mixing unit can be placed in, behind or on top of the processing room
  • heating energy: warm water, electric, high or low pressure steam
  • cooling with: Freon / Frigen, Ammoniak, cold brine, glycol, R 64
  • steam generation through the humidity of the product itself and also through electrical steam generation, low pressure steam or water injection via nozzles
  • temperature range: +2°C - + 40°C
  • relative humidity: from 80% - 95%
  • capacity / room size: up to 100 trolleys
  • step less control oft the changing flap motor: air speed from 0,5 m/s - 15,0 m/s
  • fully automatic outside air conditioning
  • cleaning through high pressure pump

Option

use of heat coming out of the cooling machine through installation of a additional heat exchanger

 

0.00 KZT

Equipment for conditioning with smoke

To add value of raw sausage products, hams, meat, fish or cheese At a glance:

  • order position of trolleys in one, two or three rows
  • mixing unit can be placed in, behind or on top of the processing room
  • heating energy: warm water, electric, high or low pressure steam
  • cooling with: Freon / frigen, Ammoniak, cold brine, glycol, R 64
  • steam generation through the humidity of the product itself and also through electrical steam generation, low pressure steam or water injection via nozzles
  • temperature range: +10°C+40°C
  • relative humidity: from 80% - 95%
  • capacity / room size: up to 30 trolleys
  • step less speed control of the fan: air speed from 0,5 m/s - 15,0 m/s
  • step less control oft the changing flap motor
  • outside air conditioning
  • cleaning through high pressure pump
  • large variety of smoke generators

option: use of heat coming out of the cooling machine through installation of a additional heat exchanger

 

0.00 KZT

Clear touchscreen control - processes always at sight

Only a few simple touches, then the microprocessor control takes over automatically: measures and controls continuously fresh air intake, humidity and temperature and takes care of a precise conditioning and of reliable repeatable processes. Storage and control of programs is easy thanks to a clear screen - in all common languages.

  • touch screen
  • simple application
  • clearly arranged control
  • microprocessor controlled technology
  • pc-connection
  • documentation of processes
  • stored programs any time reliably repeatable
  • security against electricity net failure
0.00 KZT

Liquid Smoke Equipment

At a glance:

  • completely made of stainless steel
  • infinitely variable pump capacity (0-7.8l/h)
  • stainless steel nozzle, exterior mixture of compressed air and liquid smoke
  • stainless steel pipes (diameter 8 x 1 mm) for compressed air and liquid smoke 

Your benefits:

  • minimum consumption of liquid smoke concentrate
  • fast and low-priced smoking
  • low wasting of the smokehouse 

Subject to technical modifications

0.00 KZT

At a glance:

  • fully-automatic, external friction smoke generator for industrial units
  • suitable for all 1- to 4-truck houses in the closed system
  • stock of wood magazine with automatic wood change for friction wood up to four pieces ( 80 x 80 x 1000 mm )
  • very quiet operational performance with a specially developed stainless steel friction wheel
  • stainless steel construction
  • fully automatic control via the computer screen of the unit 

Your benefits: 

  • user-friendly controls
  • low priced smoking material
  • low consumption of smoking material
  • space-saving storage of the wood
  • very fine and delicious smoke flavour

Technical data:

 

RR 2000

Dimensions w x d x h in mm:

48 x 90 x 78

electric connection: kW

5,5

range of application per unit / truck:

1-4

0.00 KZT

At a glance: 

  • fully-automatic operation in the open system
  • completely made in stainless steel
  • four different sized available, for 1- to 8-truck houses
  • suited to all kinds of wood chips with a graining of 8-16 mm
  • controlling via the computer screen of the smoking unit
  • electrical ignition
  • cold- and hot smoke possible  

Your benefits:

  • user-friendly controls and cleaning
  • short smoking times
  • high safety standard
  • well-engineered technology, well coordinated wirh the smokehouse
  • very strong smoke, intensive smoke flavour

Technical data:

 

HSR 300

HSR 400

HSR 500

Dimensions w x d x h in mm:

55 x 100 x 150

72 x 123 x 177

85 x 145 x 195

electric connection: kW

1,8

2,2

2,4

range of application per unit / truck:

1-3

4-6

5-8

0.00 KZT
Мультилинии производства макаронных изделий

Мультилинии производства макаронных изделий