Can be placed at the different work positions, which allows the operator to reach the different parts of the animal easily.
Chassis with legs and adjustable pegs, non-slip floor, rails and protective baseboards, access steps.
Made of stainless steel.
Machine designed to skin sheep easily, made up of:
A vertical rail with a cart that is powered by a hydraulic piston, 1350 mm long.
A fixed clip attached to the cart, which opens and closes automatically to grab and roll the animal skin.
Rotating hydraulic motor to turn the clip.
Powered by a hydraulic unit with a supporting frame, solenoid valves and connecting hoses between the hydraulic unit and the hydraulic pistons.
Electrical control panel.
Made of AISI-304 stainless steel.
Production: between 180 and 240 sheep/hour (depending on the facility).
The arm movements are adjustable, and the following can be modified:
To start with, the arm is on the upper part of the machine. The animal arrives with the skin slightly removed. The operator places the skin in the open clip.
When the start button is pressed the clip closes, turns and moves down, rolling up the skin around the arm. When the arm reaches the bottom, the skin is completely removed and rolled around the arm. Next, the arm raises up and unrolls the skin until it reaches the upper position.
Located in the skinning area and used to prepare skin before it enters the skinner,
Consists of a nozzle that pulls the animal’s skin, operated by a pneumatic piston. Operated using a pedal. Includes a strengthened sterilizer for the nozzle.
Made of stainless steel.Sheep skinning rotating arm
Located at the end of the restraining and stunning system (whether a restrainer or a restraining box is used).
This consists of a table with rollers and wings at the sides for the sheep carcass to fall on while it waits to be hung on the bleeding rail.
Made of stainless steel.
Entry passage leading to the stunning area. Made of two 1000 mm high fences, which are parallel to each other, leaving space for the animals to pass through. Each fence has columns with plaques that can be screwed into the floor, with a sheet metal platform.
Made of galvanised steel.
‘Length according to the facility.
System of rotating doors where the sheep enter, which leads to the restrainer or similar.
Made up of:
Central column that the rotating doors are attached to.
Fences that form a circular pen.
Entrance for the animals.
Direct exist to the stunning area.
The rotating system can be operated manually or using a 0,55 KW motor (which works using a pedal). The movement of the circular fence forces the sheep to move into the stunning area.