Milling and
pasta plants

Centrifugal compressor by pressure for fluidization system. With pressure switch, filter, shelf, pressure gauge and connections. Pneumatic conveying group by compression with centrifugal compressor with tri-phase electrical motor, filter to recover impurities with protection, super silencer with outer casing in painted steel, antivibration support, safety valve with pressure gauge, pressure switch and non return valve.

Filters for blower with cartridge, cover for cartridge, and junction of connection to blower.

Valve for silo emptying in steel or cast iron. Equipped with gear motor, transmission chain and pinions, tin props on heads, protection carter.

Deviator with complete opening for powders with body in steel, parts that come into contact with the product in stainless steel, product sealing in stainless steel and electropneumatic feeding with double double acting mode. With sealed gaskets and positioning limit switch.

Dust exhaustion system with self-cleaning filter, completed with

• exhaust fans with flux regulator,
• conveying pipes for each gasket,
• gathering collector of single exhausting socks,
• centralized filter with self-cleaning sleeves,
• tank of reserve compressed for sleeve cleaning,
• junction box for the distribution of compressed air.

Dust exhasting system on unloading from trimix during dosing to preserve hygiene in the dosing area. Composed by

• exhausting system,
• lever system for automation
• dust gathering system.

Dust exhaustion system composed by

• centrifuge exhauster,
• static dust and powder gathering filter,
• fixing band on exhauster.
• electrical motor ip 54, careening in alloy and joining stirrups.

Venting sock filter on Silsystem in

• filtering fabric, Ø 120 up to 400, height 1500 mm.
• Equipped with fixing bands.

Self-cleaning centralized filter for dust exhaustion with

• filtering sleeves and fast hook, porosity: 4 µ,
• feeding: with compressed air, 2-4 bar filtered and disoiled,
• electrical feeding: 24 V.
• Eqipped with protection lid and air-venting system, fly wheel lung with condansation unloading valve, 2 electrovalves: 1″ for cleaning, with joints.

Self-cleaning dynamic filter with sleeves, 12 or 24 MQ

• External body in stainless steel, filtering sleeves (4 µ) in polyester and antistatic fabric.
• Equipped with inspection lid with total opening through ram for easy mantenance, fly wheel lung with condansation unloading valve, 4 electrovalves: 1″ for cleaning, with joints and diffuser in stainless steel.

Filtering sleevs in polyester and antistatic fabric, is placed on the basket of the self-cleaning sifter.

Dynamic self-cleaning sifter for lung hopper,

• standard or custom, in stainless steel,
• with filtering sleeves and fast hook,
• feeding with compressed air: -4 bar filtered and disoiled,
• electrical feeding: 24 V.
• Eqipped with protection lid and air-venting system, fly wheel lung with condansation unloading valve, 2 electrovalves: 1″ for cleaning, with joints.

AUTOMATIC FLOUR FEEDING composed of the following:

• loading hopper in stainless steel by various capacities ranging from 500 lts
• spiral conveyor in stainless steel with flexible pipe in alimentary rilsan up to more than 6 mts.
• discharge conveyor complete with upper shutter for inspection and beater by eccentric masses electro-vibrator
• volumetric dosage to the mixing basin programmable thanks to timer or coupled with loading levels.
• with mixing device for different type of the flour mixing before feeding to extruder.

Options

• special dimensions with various capacities 
• prearrangement for minimum and maximum levels.

Option

Option

Option

Functioning with manual loading of sticks length 1200 mm

• Sturdy structure in painted stainless steel with AISI 304 stainless steel safety guards.
• System of automatic feeding and removing of sticks with double chain and fastening nibs.
• Cogged belts for the product transfer inside the cutting device.
• Cutting device by double counter-placed rotatory blades, easily dismountable for maintenance and cleaning operations;
• Centrifugal fan for conveying the scraps into the collection basket.

Pre-arranged for functioning with special high speed blades for special shapes.
 

Made in stainless steel it is particularly suitable to be used in production lines of fresh pasta coupled with automatic sheeters or extruders for lasagne or tagliatelle production.
It can also be used coupled with cookers for lasagne and pre-cooked cannelloni in cooking lines.
The refining rollers can be made in ground steel or in thickness-chromed iron, they feature variable diameter depending on models and width and are equipped with scrapers in teflon-coated brass, taking into consideration the large variety of models.

Model equipped with the following:

• Electronic speed variator
• Optic-eye for automatic check of sheet pasta tension
• Side-knives for sheet pasta trimming

Suitable for cutting of long pasta, lasagne and “quadrucci” (soup pasta in small square shape). Mould support in anodized aluminium, structure made in sturdy tubular, stainless steel fitted upon wheels.

Technical data:

• Feeding conveyor belt of sheet pasta in polyester net with independent motorization by electronic speed variator.
• Adjustable, sheet-opening support with matching roller.
• Motorization group for moulds equipped with independent motorizations by electronic speed variator.
• Conveyor belt for collection and transfer of product made in stainless steel with belt in polyurethane.
• Electric control panel made up of stainless steel casing, insulation IP55,  fitted on board of the machine, equipped with multi-revolutions potentiometer enabling to adjust synchronization speeds.  
• Pre-arranged for fitting  of moulds,  timer-controlled,impulse-cut for long pasta   and optic eye to adjust cutting length.
• Pre-arranged for fitting  of calibrating rollers group with independent motorization. 

Equipped either with laminating group (for products obtained from sheet pasta) or spreading cone (for products obtained directly from pasta die) upon demand

Stainless steel version available

Suitable for continuous productions; fully automatic running controlled by PLC with relevant keyboard enables moulding of nests of the desired dimensions, shapes and lengths, as well as lasagne, automatically spread onto the drying looms and obtained either from laminated sheet pasta or from a pasta die; width of sheet mms. 510 (upon demand up to mms. 540).

Upon demand the machine can be equipped with the following:

• Laminating unit for adjustment of sheet-pasta thickness, made up of couple of chromed, ground rollers
• Automatic loom-feeding device featuring output of 8 pcs. looms cms. 60x120 with automatic loom-forwarding
• Loom support after moulding, equipped with pre-drying fans
• Equipped with electronic speed variator suitable for direct coupling with sheeter or extruder.

Technical features of Nesting machine:

• Interchangeable cutting groups
• Pneumatic system of tube lifting for nest moulding of various sizes (upon demand)
• Cross cutting group made up of temporised blade for determination of tagliatelle length, synchronised with loom-forwarding device.

Technical features of Lasagne machine:

• Longitudinal cutting group made up of adjustable-position rotative blades for determination of lasagna width and side trimming
• Cross cutting group made up of temporised blade for determination of lasagne length, synchronized with loom-forwarding device.

Equipment supplied upon demand:

• Special version with expanding cone for production of flat-, round-, oval-, waved-section nests (e.g. “reginette”) obtained from pasta die
• Special version in stainless steel with direct discharge onto the pasteuriser net for production of fresh, nest-shaped “tagliatelle”.

Our company propose a new technological solution: looms featuring light alloy profiles in anodized aluminium and heat-resistant, polyester meshed-net, suitable for any kinds of static drying of products to be dehydrated, such as fruit, vegetables and, of course, pasta. These looms are used for any kind of handling, either manual or automatic thanks to their sturdiness and non-deformability.

Technical features:

• Light, sturdy, easy-to-handle, non-deformable structure
• Minimum friction enabling smooth running
• Absence of sharp edges
• Profile shaping featuring housing guides
• Heat-resistant, polyester meshed-net
• Enabling full hygienization

This machine is essential to first surface treatment of the product in order to avoid sticking and retain shape, brightness and colour. Suitable for short pasta, gnocchi, ravioli, tortellini and cappelletti. The different regulation systems which this machine is equipped with enable the highest versatility and use in all fresh or dry pasta production fields. Built in stainless steel with insulated panels, dismountable for easy cleaning and maintenance.

The first pre-drying phase is important to retain shape and colour of the product: this occurs thanks to correct ventilation and efficient heating device

All models are equipped with the following:

• Electronic variator for vibration intensity
• Regulation of treatment temperature and regulation of cycle duration
• Linking ventilation flow with modular ventilation system hot/cold
• Upon demand special constructions are made

Upon demand

• Automatic loom-feeding machine mod. MT suitable for looms measuring 120 x 60 cms. with automatic feeding device for collection and spreading of short pasta from pre-dryer.
• Structure in stainless steel with stock of max. 20 looms and motorized forwarding.
• Electric control panel prearranged for running with nesting machines and automatic loom stacker mod. IA 32.
• Model for fresh pasta are completely washable.

Models TP-600 are available for functioning with hot water exchanger, power from 40.000 Kcal per hour.
*Maximum output depends on type of product