Milling and
pasta plants

Main | Milling and
pasta plants

Consultancy, technologies suggestion, equipment supply

Studying customer's requirements

Pre-construction stage of the project (layouts, budgeting)

Civil construction supervision

Equipment supply installation and commissioning

Milling and pasta plants design and construction

Working with international quality standards and customer preferences, adapting Italian pasta or Japanese instant noodle standards to local requirements in construction and food safety aspects, HACCP production safety requirements

Technological support after-sales service

UpgradeExpansion / modernization of existing production

Automatization

Optimization of human power. Re-design of facilities with technological and equipment range provided by other suppliers

Technological supportSoft-flour or semolina, all kind of pasta

Pasta production consultancy

Study of sales tasks with constant production quality. Temperature and micro-climate conditions, moisture aspects of flour and dry pasta, efficiency vs effectiveness in production

SparpartsOriginal spare parts trading and supply

Own warehouses with spare parts

Subscriber membership warranty and post-warranty service 24/7 for all supplied equipment. Replacing old control units with the latest PLCs

Milling and
pasta plants

  • To avoid the risk of shrinkage of the hardening threads, there is a short-term treatment with boiling water (boiling) from 2 to 4 minutes.
  • To prevent the threads from expanding and overcooking immediately after the cooking process, the noodles are dried by supplying hot air to the noodle strings with a strong blowing flow, laid in a belt with baskets, the moisture in the noodle threads is evaporated and dried. At a temperature of 70 to 90 ° C for 30 -45 minutes

 

0.00 KZT

  • Automatic control of the amount of accumulation by moving through the tiers of the middle movable frame.
  • Accumulation / discharge rate control automatically matches the set production rate.
  • There is no need to stop the accumulation, even if the subsequent process has stopped for technical or other reasons.
  • Damage to portions of noodles or the appearance of broken noodles is reduced to zero.
  • After troubleshooting, the machine automatically clears the tiers faster and can accept new batches faster without overloading the accumulation system.

Option:

  • Combined function cooling or reheating of products.
0.00 KZT

  • The high-speed output of 60 cycles per minute and 480 pieces per minute, respectively, is sequentially carried out by a double-acting system that alternates between filling and sealing (cups, glasses, plates).
  • The conveyor that transports the noodle cup on a pallet and the machine that attaches the seal to the cup are integrated.
    In the packaging machine, the heater head built into the suction cup sucks the thermal paper lid one by one, and the other heater head presses the lid as a seal against the cup.
    High-speed sealing is carried out by a double action method that alternates between this operation. Removing cups after the sealing device is also connected to the conveyor and these continuous processes can improve productivity
0.00 KZT

Axor technology combines the tradition of pasta to a new method for preparing it in a natural and healthy way. Thanks to a low speed extrusion, a cooking system with extremely controlled steam pression and a homogeneous drying, it is possible to obtain a product which does not need to be cooked but only needs a simply rehydration for approximately 2-3 minutes. Instant pasta can be combined with different types of sauces and toppings. A good and healthy alternative to the Asiatic noodles that are filled with fat excess, high salt content and artificial flavour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness necessary for pasta to keep its shape at the exit of the die head. Of course, the press is fitted with Total Vacuum System Technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in next steps of the pasta production process.

Instant Pasta Steam Cooker

This piece of equipment is provided with a new low-pressure steam spreading system, to ensure a uniform and deep cooking of instant pasta. The conveyor belt of the steam cooker is manufactured in self-cleaning PIK, perfect for high temperature.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor.

  • Integrated supervision of the automation system entirely developed by Axor,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.
0.00 KZT

Axor technology combines the tradition of pasta to a new method for preparing it in a natural and healthy way. Thanks to a low speed extrusion, a cooking system with extremely controlled steam pression and a homogeneous drying, it is possible to obtain a product which does not need to be cooked but only needs a simply rehydration for approximately 2-3 minutes. Instant pasta can be combined with different types of sauces and toppings. A good and healthy alternative to the Asiatic noodles that are filled with fat excess, high salt content and artificial flavour.

Press

  • Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness necessary for pasta to keep its shape at the exit of the die head. Of course, the press is fitted with Total Vacuum System Technology.
  • The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in next steps of the pasta production process.

Instant Pasta Steam Cooker

This piece of equipment is provided with a new low-pressure steam spreading system, to ensure a uniform and deep cooking of instant pasta. The conveyor belt of the steam cooker is manufactured in self-cleaning PIK, perfect for high temperature.

ENA Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

  • ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.
  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.
0.00 KZT

Axor technology combines the tradition of pasta to a new method for preparing it in a natural and healthy way. Thanks to a low speed extrusion, a cooking system with extremely controlled steam pression and a homogeneous drying, it is possible to obtain a product which does not need to be cooked but only needs a simply rehydration for approximately 2-3 minutes. Instant pasta can be combined with different types of sauces and toppings. A good and healthy alternative to the Asiatic noodles that are filled with fat excess, high salt content and artificial flavour.

Press

Pasta production process starts here: in the vacuum mixing tank, raw materials and water are dosed, to obtain the dough. Then, thanks to the mechanical action of the high efficiency compression screws, the dough reaches the perfect compactness necessary for pasta to keep its shape at the exit of the die head. Of course, the press is fitted with Total Vacuum System Technology.

The cutting unit is a completely independent unit, fixed at the press legs. It is suitable for cutting any pasta shape and also to fit the “penne” cutter device.

Shaker and Bucket Elevator

Pasta drying process starts here. The shaker is fitted with a new motion device (patented), which allows a significant energy saving. In the shaker, the surface of the pasta is dried very quickly by hot air, to prevent sticking in next steps of the pasta production process.

Instant Pasta Steam Cooker

This piece of equipment is provided with a new low-pressure steam spreading system, to ensure a uniform and deep cooking of instant pasta. The conveyor belt of the steam cooker is manufactured in self-cleaning PIK, perfect for high temperature.

E.N.A. Dryer

The complete pasta drying process occurs in two zones of the E.N.A. dryer: the pre-dryer and main dryer, each having separated thermohygroregulation control units. A pre-drying phase of approximately 40 minutes, followed by a drying phase of approximately 2 hours, to end with a stabilization phase of approximately 30 minutes, allows a high-quality production using any kind of raw materials. The E.N.A. dryer is fitted with high density fiberglass panels, internally lined with stainless steel sheets and silicone rubber gaskets.

Cooler

The air/water cooler is fitted with an external cooling unit to lower the pasta temperature and to make it suitable for storage and/or packaging.

Process automation

ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.

  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.
0.00 KZT

We offer fully automatic, continuous lines for the production and drying of short-cut pasta to all pasta factories.

These lines have been engineered and manufactured to meet all the producers’ requirements for functional capacity, simplicity and quality of the artisanal plant to be part of a more industrial and automated project that still retains a very valid quality-to-price ratio.

Technical and technological specifications of the machines making up the line:

  • Single-screw extruder equipped with patented centrifuge and vacuum mixer for feeding of the screw.
  • Pre-dryer by five vibrating tiers: stainless steel structure, looms and paneling that can be easily opened and cleaned. Heating system by winged heat exchangers running either by hot or overheated water, served by axial electro-ventilators suitable for treatment temperature up to 80°С.
  • Continuous dryer featuring mats in thermo-resistant, polyester mesh made up of two technological areas equipped with independent climate control probes; pre-drying, drying and stabilization areas. The paneling that can be fully opened all along the machine perimeter is made up of AISI 304 stainless steel panels with internal insulation by 20 mm rock wool and injection of high-density polyurethane thus totaling 60 mm total thickness.
  • The mats in thermo-resistant, polyester mesh by 1700 mm usable width supported by stainless steel bars and chains are equipped with independent, variable-speed gear motor that is controlled by the inverter from the main line control panel.
  • The loading and distribution device of the product onto the drying mat is made up of a light metal structure and stainless steel mesh driven by eccentric mass motor-vibrators by adjustable intensity.
  • The heating groups are made of winged exchangers running either by hot or overheated water, served by axial electro-ventilators suitable for high temperatures.
  • The air exchange group is made by inlet and exhaust piping and proportional opening valve that is fully in stainless steel.
  • Ambient air cooler served by high-performance axial fans or upon demand by Freon evaporators or glycol water running exchangers. Transport of the product is effected on polyester mat driven by variable speed, independent gear motor
  • Electric control panel equipped with PLC and color touch-screen, enabling  software integration with PC controlled, supervision system.

 

0.00 KZT

We offer fully automatic, continuous lines for the production and drying of short-cut pasta to all pasta factories.

These lines have been engineered and manufactured to meet all the producers’ requirements for functional capacity, simplicity and quality of the artisanal plant to be part of a more industrial and automated project that still retains a very valid quality-to-price ratio.

Technical and technological specifications of the machines making up the line:

  • Single-screw extruder equipped with patented centrifuge and vacuum mixer for feeding of the screw.
  • Pre-dryer by five vibrating tiers: stainless steel structure, looms and paneling that can be easily opened and cleaned. Heating system by winged heat exchangers running either by hot or overheated water, served by axial electro-ventilators suitable for treatment temperature up to 80°С.
  • Continuous dryer featuring mats in thermo-resistant, polyester mesh made up of two technological areas equipped with independent climate control probes; pre-drying, drying and stabilization areas. The paneling that can be fully opened all along the machine perimeter is made up of AISI 304 stainless steel panels with internal insulation by 20 mm rock wool and injection of high-density polyurethane thus totaling 60 mm total thickness.
  • The mats in thermo-resistant, polyester mesh by 1700 mm usable width supported by stainless steel bars and chains are equipped with independent, variable-speed gear motor that is controlled by the inverter from the main line control panel.
  • The loading and distribution device of the product onto the drying mat is made up of a light metal structure and stainless steel mesh driven by eccentric mass motor-vibrators by adjustable intensity.
  • The heating groups are made of winged exchangers running either by hot or overheated water, served by axial electro-ventilators suitable for high temperatures.
  • The air exchange group is made by inlet and exhaust piping and proportional opening valve that is fully in stainless steel.
  • Ambient air cooler served by high-performance axial fans or upon demand by Freon evaporators or glycol water running exchangers. Transport of the product is effected on polyester mat driven by variable speed, independent gear motor
  • Electric control panel equipped with PLC and color touch-screen, enabling  software integration with PC controlled, supervision system.

 

0.00 KZT

We offer fully automatic, continuous lines for the production and drying of short-cut pasta to all pasta factories.

These lines have been engineered and manufactured to meet all the producers’ requirements for functional capacity, simplicity and quality of the artisanal plant to be part of a more industrial and automated project that still retains a very valid quality-to-price ratio.

Technical and technological specifications of the machines making up the line:

  • Single-screw extruder equipped with patented centrifuge and vacuum mixer for feeding of the screw.
  • Pre-dryer by five vibrating tiers: stainless steel structure, looms and paneling that can be easily opened and cleaned. Heating system by winged heat exchangers running either by hot or overheated water, served by axial electro-ventilators suitable for treatment temperature up to 80°С.
  • Continuous dryer featuring mats in thermo-resistant, polyester mesh made up of two technological areas equipped with independent climate control probes; pre-drying, drying and stabilization areas. The paneling that can be fully opened all along the machine perimeter is made up of AISI 304 stainless steel panels with internal insulation by 20 mm rock wool and injection of high-density polyurethane thus totaling 60 mm total thickness.
  • The mats in thermo-resistant, polyester mesh by 1700 mm usable width supported by stainless steel bars and chains are equipped with independent, variable-speed gear motor that is controlled by the inverter from the main line control panel.
  • The loading and distribution device of the product onto the drying mat is made up of a light metal structure and stainless steel mesh driven by eccentric mass motor-vibrators by adjustable intensity.
  • The heating groups are made of winged exchangers running either by hot or overheated water, served by axial electro-ventilators suitable for high temperatures.
  • The air exchange group is made by inlet and exhaust piping and proportional opening valve that is fully in stainless steel.
  • Ambient air cooler served by high-performance axial fans or upon demand by Freon evaporators or glycol water running exchangers. Transport of the product is effected on polyester mat driven by variable speed, independent gear motor
  • Electric control panel equipped with PLC and color touch-screen, enabling  software integration with PC controlled, supervision system.

 

0.00 KZT

AUTOMATIC FLOUR FEEDING composed of the following:

  • loading hopper in stainless steel by various capacities ranging from 250 up to 500 lts
  • spiral conveyor in stainless steel with flexible pipe in alimentary rilsan up to more than 6 mts.
  • discharge conveyor complete with upper shutter for inspection and beater by eccentric masses electro-vibrator
  • volumetric dosage to the mixing basin programmable thanks to timer or coupled with loading levels.
  • Fitted upon wheels support; 

Options

  • special dimensions with various capacities 
  • prearrangement for minimum and maximum levels.

 

0.00 KZT

AUTOMATIC FLOUR FEEDING composed of the following:

  • loading hopper in stainless steel by various capacities ranging from 250 up to 500 lts
  • spiral conveyor in stainless steel with flexible pipe in alimentary rilsan up to more than 6 mts.
  • discharge conveyor complete with upper shutter for inspection and beater by eccentric masses electro-vibrator
  • volumetric dosage to the mixing basin programmable thanks to timer or coupled with loading levels.
  • With conveyor support fitted on the mixer; 

Options

  • special dimensions with various capacities 
  • prearrangement for minimum and maximum levels.

 

0.00 KZT

AUTOMATIC FLOUR FEEDING composed of the following:

  • loading hopper in stainless steel by various capacities ranging from 500 lts
  • spiral conveyor in stainless steel with flexible pipe in alimentary rilsan up to more than 6 mts.
  • discharge conveyor complete with upper shutter for inspection and beater by eccentric masses electro-vibrator
  • volumetric dosage to the mixing basin programmable thanks to timer or coupled with loading levels.
  • with mixing device for different type of the flour mixing before feeding to extruder.

Options

  • special dimensions with various capacities 
  • prearrangement for minimum and maximum levels.
0.00 KZT

MAC 30

Pasta extruders equipped with double basin suitable for continuous production of fresh pasta of the short, long and sheet kind, which can be obtained with any types of flour. These pasta machines are particularly suitable for pasta shops and large communities. Entirely built in stainless steel they are to the international, hygienical and safety rules.

MAC 30 VR

Pasta machine equipped with speed variator enabling variable output, particularly suitable for direct coupling with machines for ravioli, tortellini and cappelletti production.

VACUUM VERSION

Special version with vacuum extrusion device enabling to obtain more homogeneous dough and final product which is more colourful and air bubble-free.

Models equipped with the following:

  • automatic pasta cutter;
  • fan for pre-drying of pasta;
  • dismountable shafts of mixers.

Optionals:

  • vacuum extrusion device and relevant pump;
  • vertical extrusion head;
  • impulse-pasta cutting device for long pasta and special shapes.
0.00 KZT

MAC 60

Pasta extruders equipped with double basin suitable for continuous production of fresh pasta of the short, long and sheet kind, which can be obtained with any types of flour. These pasta machines are particularly suitable for pasta shops and large communities. Entirely built in stainless steel they are to the international, hygienical and safety rules.

MAC 60 VR

Pasta machine equipped with speed variator enabling variable output, particularly suitable for direct coupling with machines for ravioli, tortellini and cappelletti production.

VACUUM VERSION

Special version with vacuum extrusion device enabling to obtain more homogeneous dough and final product which is more colourful and air bubble-free.

Models equipped with the following:

  • automatic pasta cutter;
  • fan for pre-drying of pasta;
  • dismountable shafts of mixers.

Optionals:

  • vacuum extrusion device and relevant pump;
  • vertical extrusion head;
  • impulse-pasta cutting device for long pasta and special shapes.
0.00 KZT

Pasta extruders equipped with double basin suitable for continuous production of fresh pasta of the short, long and sheet kind, which can be obtained with any types of flour. These pasta machines are particularly suitable for pasta shops and large communities. Entirely built in stainless steel they are to the international, hygienical and safety rules.

Vacuum version

Special version with vacuum extrusion device enabling to obtain more homogeneous dough and final product which is more colourful and air bubble-free.

Models equipped with the following:

  • automatic pasta cutter;
  • fan for pre-drying of pasta;
  • dismountable shafts of mixers.

Optionals:

  • vacuum extrusion device and relevant pump;
  • vertical extrusion head;
  • impulse-pasta cutting device for long pasta and special shapes.
0.00 KZT
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction