Clean-in-place CIP and washing tunnels fop cheese forms

Main | Milk processing and cheese production | Clean-in-place CIP and washing tunnels fop cheese forms

Clean-in-place CIP and washing tunnels fop cheese forms

The module is designed for cleaning in a closed line with circulation through the cleaning solutions storage tank. It has three main programs. The cleaning cycle is semi automated and it does not require a high level of automation in the production sectors /HLA/. Cleaning systems with up to 4 modules can be constructed with
DONI®Pro CIP M. Every module services 12 lines in 24 hours. Different time and temperature parameters are set for each line (only time and temperature) depending on the contamination. The cleaning of two or more lines can be performed if there is sufficient output and pressure.
The solutions in the storage tank have to be prepared before the work begins. The preparation is done through the recirculation line and includes: Increasing the solutions temperature to 45 – 50 °С and adding detergents until the necessary concentration in the storage tanks is reached.
DONI®Pro CIP M is installed on a platform, compact and hydraulically tested in factory conditions. It has a rotary pump, a balance tank, a plate or tubular heat exchanger and sensors for conductivity, temperature, flow and pressure. It also has regulating valve and shut-off valve for steam, sanitary manual valves for flow control, control panel.

0.00 KZT

The module is designed for cleaning in a closed line with circulation through the cleaning solutions storage tank. It has three main programs. The cleaning cycle is semi automated and it does not require a high level of automation in the production sectors /HLA/. Cleaning systems with up to 4 modules can be constructed with
DONI®Pro CIP M. Every module services 12 lines in 24 hours. Different time and temperature parameters are set for each line (only time and temperature) depending on the contamination. The cleaning of two or more lines can be performed if there is sufficient output and pressure.
The solutions in the storage tank have to be prepared before the work begins. The preparation is done through the recirculation line and includes: Increasing the solutions temperature to 45 – 50 °С and adding detergents until the necessary concentration in the storage tanks is reached.
DONI®Pro CIP M is installed on a platform, compact and hydraulically tested in factory conditions. It has a rotary pump, a balance tank, a plate or tubular heat exchanger and sensors for conductivity, temperature, flow and pressure. It also has regulating valve and shut-off valve for steam, sanitary manual valves for flow control, control panel.

0.00 KZT

The Module is designed for cleaning in a closed line with circulation through a balance tank. It has three main programs plus an extra additional special program used in cases of bacteriophage. The cleaning is fully automated and requires a high level of automation in the production sectors /HLA/. Cleaning systems with up to 6 integrated modules can be constructed with DONI®Pro CIP A. Every module services 16 lines in 24 hours. Individual parameters are set for each line. They depend on the type of contamination. Cleaning of two or more lines at a time can be performed if there is sufficient output and pressure. Circulation through balance tank saves energy and detergents because it heats only the volume necessary for the specific line and maintains optimal concentration corresponding to the contamination of the surfaces. Small volumes and very dirty cleaning solutions are diverted for neutralisation and disposal.
The parameters: time, concentration, temperature and flow are recorded and individually regulated for each line. DONI®Pro CIP A is compact, installed on a platform and hydraulically tested in factory conditions. It has a centrifugal pump, a balance tank, a plate or tubular heat exchanger, sensors for conductivity, temperature, flow and pressure, automatic regulating and shut-off valves for steam, dosing pumps for cleaning solutions and disinfectants, sanitary electropneumatic valves for flow control, control panel.

0.00 KZT

The Module is designed for cleaning in a closed line with circulation through a balance tank. It has three main programs plus an extra additional special program used in cases of bacteriophage. The cleaning is fully automated and requires a high level of automation in the production sectors /HLA/. Cleaning systems with up to 6 integrated modules can be constructed with DONI®Pro CIP A. Every module services 16 lines in 24 hours. Individual parameters are set for each line. They depend on the type of contamination. Cleaning of two or more lines at a time can be performed if there is sufficient output and pressure. Circulation through balance tank saves energy and detergents because it heats only the volume necessary for the specific line and maintains optimal concentration corresponding to the contamination of the surfaces. Small volumes and very dirty cleaning solutions are diverted for neutralisation and disposal.
The parameters: time, concentration, temperature and flow are recorded and individually regulated for each line. DONI®Pro CIP A is compact, installed on a platform and hydraulically tested in factory conditions. It has a centrifugal pump, a balance tank, a plate or tubular heat exchanger, sensors for conductivity, temperature, flow and pressure, automatic regulating and shut-off valves for steam, dosing pumps for cleaning solutions and disinfectants, sanitary electropneumatic valves for flow control, control panel.

0.00 KZT

The Module is designed for cleaning in a closed line with circulation through a balance tank. It has three main programs plus an extra additional special program used in cases of bacteriophage. The cleaning is fully automated and requires a high level of automation in the production sectors /HLA/. Cleaning systems with up to 6 integrated modules can be constructed with DONI®Pro CIP A. Every module services 16 lines in 24 hours. Individual parameters are set for each line. They depend on the type of contamination. Cleaning of two or more lines at a time can be performed if there is sufficient output and pressure. Circulation through balance tank saves energy and detergents because it heats only the volume necessary for the specific line and maintains optimal concentration corresponding to the contamination of the surfaces. Small volumes and very dirty cleaning solutions are diverted for neutralisation and disposal.
The parameters: time, concentration, temperature and flow are recorded and individually regulated for each line. DONI®Pro CIP A is compact, installed on a platform and hydraulically tested in factory conditions. It has a centrifugal pump, a balance tank, a plate or tubular heat exchanger, sensors for conductivity, temperature, flow and pressure, automatic regulating and shut-off valves for steam, dosing pumps for cleaning solutions and disinfectants, sanitary electropneumatic valves for flow control, control panel.

0.00 KZT

DONI®Washmatic is a tunnel designed to wash moulds and block moulds. The quality of the washing depends on: The time the mould stays in the washing zone, the use of correct detergents, the temperature, the nozzles positions and the flow velocity (speed) created by them. DONIDO's module creates the best conditions for the correct running of the process.
DONIDO® offers two different models of DONI®Washmatic. The design choice depends on the ratio (correlation) between the holding time which guarantees quality washing and the necessary linear velocity of the moulds which has to correspond to the linear velocity of the other modules on the line. The washing is carried out in separate zones: preliminary washing, main washing, rinsing and disinfection.

The dimensions are relative and can be changed depending on the moulds' size.

0.00 KZT

DONI®Washmatic is a tunnel designed to wash moulds and block moulds. The quality of the washing depends on: The time the mould stays in the washing zone, the use of correct detergents, the temperature, the nozzles positions and the flow velocity (speed) created by them. DONIDO's module creates the best conditions for the correct running of the process.
DONIDO® offers two different models of DONI®Washmatic. The design choice depends on the ratio (correlation) between the holding time which guarantees quality washing and the necessary linear velocity of the moulds which has to correspond to the linear velocity of the other modules on the line. The washing is carried out in separate zones: preliminary washing, main washing, rinsing and disinfection.

The dimensions are relative and can be changed depending on the moulds' size.

0.00 KZT