The screw compressor of the HIT-3G series is a comprehensive solution in the form of a compressed air source in the company, constructed on the basis of the latest world technologies associated with the highest quality materials. The HIT compressor is equipped with a microprocessor panel of the control system, which is a novelty in this class of compressors. This solution allows for easy and legible operation of the device. The system automatically detects irregularities in operation and informs by displaying the type of failure, and if there is a risk of damage to the compressor, it will turn it off
HIT screw compressor - Description of components
L9 control panel
The HIT compressor is equipped with a microprocessor panel of the control system. It informs the user about the compressor's operating mode. The clear and detailed display provides information about:
the device's defect through a detailed alarm code
operating temperature of the screw module
total number of hours worked and under load
time remaining until the service inspection.
fault memory function.
Pressure under your control - By installing a pressure transducer, you can change the minimum and maximum pressure via the control panel. The working pressure is shown on the display in tenths of bar.
Modern automation, based on the highest quality components , protects the compressor against:
voltage drop in the electric network
failure of the power phase
incorrect direction of engine rotation
overload of the engine
too high oil temperature
too low oil temperature
starting of an unloaded screw module
Made of the best components, the pump system of the HIT series compressor has one of the best efficiency ratios on the market in proportion to the engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.
Extremely effective, two-function cooler ensuring optimal working conditions in the most difficult working conditions of the compressor. It allows to achieve a low outlet temperature of the air to the pneumatic network. High-temperature hydraulic hoses are used to connect the cooler with the module .
Cooler connection flange - the upper structure of the compressor enables connection of an exhaust system in order to disperse heat around the facility.
Screw module with tensioner
Made of the best components, the SMART compressor pumping system has one of the best efficiency ratios on the market in proportion to engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.
The housing of the HIT screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 67 [dBA], which is one of the best results in this class of compressors.
Automatic preinstalled drain HD-MD600
Min. / Max. temperature (° C) +1 / +50 Operating pressure 0-16 bar. Condensate Dirty with oil and no oil Aluminum body lined with a hard, abrasion-resistant coating
The indispensable system in modern condensate management. The automatic electromagnetically controlled check valve, based on continuous measurements of the condensate level in the tank, opens as needed and causes a continuous discharge of condensate from the compressed air system without pressure loss.
- Better work even with small capacities of the air receiver. - Constant pressure in the compressed air network. - Soft start-up of the compressor - low starting current - no pulsating blows in the compressed air network - Greater reliability - gentle - soft start and acceleration - smooth braking (thus reducing mechanical and electrical loads ) - longer life of the moving components. - Microprocessor controller protecting compressor through the control and monitoring systems of the main operating parameters. - Smooth regulation of compressor revolutions in the range from 50% to 100% revolutions. - The power factor of the cos phi motor is kept at the highest level throughout the rev range.
The VDBI compressor is equipped with the L26S microprocessor panel of the control system, which informs about the compressor's operating mode. The alphanumeric LCD display provides information on the defect of the device, the temperature of the screw module, working pressure, the number of hours worked, and the time remaining until the service inspection. The control panel enables the automatic start-up of the compressor after a power failure and the setting of 3 work schedules for one day a week. It is possible to connect the compressor in a cascade (master / slave / multi-compressor). The control system can be viewed in 8 languages: Polish, English, German, French, Italian, Spanish, Turkish and Portuguese.
Message was sent
Message was sent, soon our adviser will contact you…