Gluten-free long-cut pasta line from 1000 kg/hour AXOR OCRIM

Main | Pasta processing technologies |Continuous pasta processing lines | Gluten-free long-cut pasta line from 1000 kg/hour AXOR OCRIM

Gluten-free long-cut pasta line from 1000 kg/hour AXOR OCRIM

GENERAL TECHNICAL DATA
Output capacity from 1000 kg/hour
Dimension H 7700 mm
Dimension L1 33200 mm
Dimension L2 38700 mm
AXOR OCRIM

AXOR is since more than 20 years specialized in the design and supply of tailor made complete dry pasta lines for short, long and special shapes. It has since then supplied over a hundred lines with capacities ranging from 500 kg/h to more than 4...

Raw material steam cooker

It is possible to produce pasta with any kind of gluten-free raw material (corn, rice, quinoa, etc.). During this phase, thanks to a precise volumetric dosing and to a powerful system of steam injection, the starch contained in the raw material is gelatinized, to be ready for the next forming phase.

Former press

The raw material, already gelatinized and humidified in the previous phase, is formed in a vacuum tank and then extruded with high efficiency compression screws, necessary to keep the pasta shape, at the exit of the die head.

Spreader

This equipment allows a homogeneous spreading of the Long-Cut Pasta on 2550 mm sticks. It is provided with an automatic system for fresh scraps recovery and a pneumatic conveying system to the press.

Pre-Dryer, Dryer and Cooler

  • The surface of the Long-Cut Pasta is pre-dried, with a continuous hot air flow, to prepare the product for the subsequent drying phase.
  • Thanks to MONOTIER technology, a succession of ventilation phases and off phases occurs with the maximum simplicity, completely controlled by automatic systems of thermohygroregulation.
  • The cooler, fitted with a heat exchanger entirely manufactured in stainless steel, allows to lower the temperature of the pasta and make it suitable for storage and / or packaging.

Buffer and Stripper

With a storage capacity of approximately 30-35 minutes, the buffer makes possible to store LongCut Pasta on sticks before the stripper, to compensate possible short shutdowns of the packaging system.

The stripper automatically removes the sticks and cuts the pasta to the length required for the next phase of packaging.

Process automation

  • ARS (AxorOcrim Remote Service) is the automation and supervision system completely developed by Axor Ocrim.
  • Integrated supervision of the automation system entirely developed by Axor Ocrim,
  • Real time full control of the line components,
  • Management and analysis of recipes, historical data and power consumption,
  • Compatibility with all management software,
  • Access via Axorapp for all mobile devices (smartphone, tablet, laptop),
  • Remote assistance with Axor Ocrim’s technical and support center, available 24 hours / 7 days.
г. Алматы