Milk processing and
cheese production

Main | Milk processing and
cheese production

Consultancy, technologies suggestion, equipment supply

Studying customer's requirements

Pre-construction stage of the project (layouts, budgeting)

Civil construction supervision

Equipment supply installation and commissioning

Design and construction of milk processing plants

Apply international standard and working with customer preferences. Adapt European standards for milk processing and production of soft and hard cheese. Locally acceptable design, requirements in construction in the aspect of food safety or HACCP standard.

Technological support after-sales service

UpgradeModernization and expansion of existing production

Production automation

Optimization of the manpower. Re-design of facilities with technological and equipment range provided by other suppliers

Technological supportCottage cheese, suluguni, emmental, butter

Consulting in cheese production

Study of raw materials, selection of Spanish, Italian, Bulgarian, Oriental or Middle Eastern technologies production of cheese, dairy products and butter

SparpartsOriginal spare parts trading and supply

Own warehouses with spare parts

24/7 contractual services for all warranty and post warranty on the supplied equipment. Replacement of old operating controls with the latest PLCs.

Milk processing and
cheese production

A - Standard frame in plastic material, internally reinforced in steel, colour white; in the low temperature version it is equipped with anticondensation heating cable.

B - Standard leaf consisting of a sandwich panel in prepainted sheet RAL 9010 insulated with PUR density 41 kg/m3, perimetric rim in anodised aluminium with a seal gasket along its perimeter.

Thicknesses available:

  • 7 cm (mod.SC07)
  • 9 cm (mod. SC09) for TN doors,
  • for the low temperature versions the standard thickness is 12 cm (mod. SC12).

C - Standard sliding rail in anodized aluminium with carter in white prepainted aluminium.

D - Standard back rail for sliding and regulation, wall mounted, in anodized aluminium; it enables the sliding motion and the seal of the gasket, without additional accessories mounted to the floor that could be obstructive.

E - Threshold, connected to the frame, can be in 4 different types according to the required use of the door.

E - Internal frame in plastic material, colour white, placed on the internal side of the cold room, it permits a rapid fastening to the prefabricated panels.

0.00 KZT

Rapid roll up door suitable for negative temperature between -5° and -25 ° C.

It is self-repairing, in case the sheet comes out from the guides it will return inside the guides on the  next opening. The door is CE certified according to EN 13241-1. It is Silent: The sheet flows into guides provided with a brush system.

The safety against crushing is ensured by an optical safety barrier with Sender/receiver technology. Sheet: insulated, suitable for low temperatures, ice-free. Heating system on the side frame and on the upper guide. The motorgear is provided with encoder, safety catch device, and crank to open the door manually.

Frame: folded steel sheet and epoxy white painted RAL 9010. The electrical control box is resistant to impacts, complete with inverter, touch screen display, exclusive Incold software, emergency button and main switch. Power supply 220V 50 Hz.

0.00 KZT

PSI-F semi-insulating service doors are designed for indoor installation in conditioned areas with minimum working temperatures ≥ 12°C, ΔT ≤ 12°C, R.H. ≤ 60.

They can be supplied for installation on panel or on brick wall.

 

0.00 KZT

Rapid roll up door suitable for positive temperature between 0° and 35 ° C.

It is self-repairing, in case the sheet comes out from the guides it will return inside the guides on the  next opening. The door is CE certified according to EN 13241-1. It is Silent: The sheet flows into guides provided with a brush system. The safety against crushing is ensured by an optical safety barrier with Sender/receiver technology.

Transparent windows in Cristal. The motorgear is provided with encoder, safety catch device, and crank to open the door manually. Frame: folded steel sheet and epoxy white painted RAL 9010. The electrical control box is IP65 in ABS case resistant to corrosion, complete with inverter, touch screen display, exclusive Incold software, emergency button and main switch and pre-wired connector.

Power supply 220V 50 Hz.

Accessories:

  • 2 black buttons Ø80 mm for supplementary opening.
0.00 KZT

The semi-insulating doors of the PVV-PE & PVV-PEG line (to-and-from in high density polyethylene) are designed for installations in air-conditioned rooms with minimum working temperatures > 12 °C, ΔT < 12 °C, U.R. < 60% they can only be used as service entrances and not for uses requiring a hermetic and thermal seal.

They can be supplied for installation on panel or brick wall.

 

0.00 KZT

Rapid fold-up door for positive temperature installations between 0° and 45° C and indoors.

Self-repairing: in case of shock, hinges welded to the tarp exit from the vertical uprights. They retract on their own at the following opening. CE marked in accordance with EN 132411 standard.

Wind resistance: Class 3. The mantle covering is bound to the side uprights owing to a system of hinges welded sideways to the tarp; the latter slide inside the selflubricating polythene vertical guides. Safety: ensured by light curtain  with system consisting of transmitter and receiver, in accordance with EN 12445.

0.00 KZT

PSI-F semi-insulating service doors are designed for indoor installation in conditioned areas with minimum working temperatures ≥ 12°C, ΔT ≤ 12°C, R.H. ≤ 60.

They can be supplied for installation on panel or on brick wall.

 

0.00 KZT

PVV-F & PVV-FG semi-insulating doors are designed for installation in air-conditioned rooms with minimum working temperatures > 12°C, ΔT < 12°C, R.H. < 60%.

They can only be used as service doors and not for uses requiring a hermetic or thermal seal.

They can be supplied for installation on panel or brick wall.

 

0.00 KZT

PSI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ΔT ≤ 12°C, R.H. ≤ 60%.

They can only be used as service doors and not for uses requiring a hermetic or thermal seal.

They can be supplied for installation on panel or brick wall.

0.00 KZT

The PVC strip curtains are suitable for separating different working areas and they serve as flexible barriers next to isothermal doors, to reduce the thermal loss or the entry of hot air (to prevent condensation) during the daily operation of opening and closing.

They are made of:

  • Plastic support in dark grey color consisting of a profile to be fixed to the panel by self tapping screws and a plastic covering molded as part of the same support, to cover the structure and to give an aesthetical enhanced result, easy to clean and without sharp edges, (dowels available on demand).
  • PVC transparent strip curtains, dim. 200x2 mm with 50 mm of overlapping.

 

0.00 KZT

Flexible strip closures in transparent PVC are suitable for creating separate spaces and in particular, as flexible barriers, for use near refrigerator doors to limit thermal dispersion or infiltration of hot air (and the consequent condensation) during the opening and closing of these doors.

They consist of a sturdy load-bearing structure in AISI 304 stainless-steel profile sections and of transparent PVC strips with rapid rocking lock and release fitting in stainless steel.

The strips are available in 2 different versions:

  1. Mod. ST 200 x 2, consisting of transparent PVC strips measuring 200 x 2 mm with 50 mm overlap.
  2. Mod. ST 300 x 3, consisting of transparent PVC strips measuring 300 x 3 mm with 100 mm overlap.

 

0.00 KZT

The PCE-F series of hinged doors, available on both positive and negative temperature models, consist of 4 essential parts as specified below.

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating element.

B - Monolithic leaf in bended prepainted sheet white Ral 9010 with rigid polyurethane foam injected on the inside to act as thermal insulation. Along the perimetral edges, special rubber gasket guarantees the temperature seal. The hardware consists mainly of the exclusive handle model LH, complete with key lock and luminescent safety release on the inside and one or more helical hinges, adjustable with screws.

The leaf comes in 2 different thicknesses depending on the working temperature:

  • CE 07 TN for uses up to – 5°C
  • CE 09 BT for uses up to – 20°C

C - Threshold, connected to the frame, can be in 6 different types according to the required use of the door.

D - Internal frame in plastic material, colour white, placed on the internal side of the cold room, it permits a rapid fastening to the prefabricated panels.

 

0.00 KZT

Flexible strip closures in transparent PVC are suitable for creating separate spaces and in particular, as flexible barriers, for use near refrigerator doors to limit thermal dispersion or infiltration of hot air (and the consequent condensation) during the opening and closing of these doors.

They consist of a sturdy load-bearing structure in AISI 304 stainless-steel profile sections and of transparent PVC strips with rapid rocking lock and release fitting in stainless steel.

The strips are available in 2 different versions:

  • 1. Mod. ST 200 x 2, consisting of transparent PVC strips measuring 200 x 2 mm with 50 mm overlap.
  • 2. Mod. ST 300 x 3, consisting of transparent PVC strips measuring 300 x 3 mm with 100 mm overlap
 

 

0.00 KZT

The two leaves PCE-2B series of hinged doors, available for both positive and negative temperature, consist in 4 essential parts as listed below:

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating cable.

B - Two leaves consisting of: two supports in pre-painted sheet white RAL9010 surrounded by an anodized aluminium profile, with rigid polyurethane foam injected on the inside to act as thermal isolation. Along the edge in anodized aluminium, is seated a special gasket which guarantees the temperature seal.

On the semi-fixed leaf there is a central doorstop profile which guarantees the temperature seal in central position. In the low temperature version the central doorstop profile is equipped of an anti-condensation heating cable. The hardware consist mainly of: rotating handle fixed on the moving leaf, complete with key lock and internal safety release; internally to the semi-fixed leaf there is a key lock type espagnolette bolt, which allow the locking of the leaf both on the inferior and superior part on the closing position; two helical hinges, for each leaf adjustable with screws.

The leaf is furnished in two different thicknesses depending on the working temperature:

  • CE2B 07 TN for uses up to -5°C
  • CE2B 09 BT for uses up to – 20°C

C - The threshold connected to the frame can be of 4 different types according to the required use of the door.

D - Connecting profiles in stainless steel for fastening on prefabricated panel. An optional version has the counter frame in reinforced plastic material.

 

0.00 KZT
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction