Isothermal PIR
panels and doors

Main | Slaughter houses deboning rooms | Isothermal PIR
panels and doors

Isothermal PIR
panels and doors

Sandwich panels tongue-and-groove joint with camlocks.

Manufactured in accordance with European standard EN 14509:2007, specifically designed for the construction of controlled temperatures and humidity rooms, food packaging rooms, clean rooms, ensure high performances of thermal insulation, aesthetic value, hygiene and rapid assembling.

0.00 KZT

Sandwich panels with tongue and groove joint produced with an air intake one shot system, consisting of 2 laminates made of PRFV (polyester reinforced with glass fibre also known as fibreglass) between which high density PUR foam is injected. Appropriate for the realization of cold rooms at both positive and negative temperatures, processing rooms, agricultural/food areas with highly aggressive agents such as dairies, cured meat factories, seafood/fish processing, and all food products in general.

Designed to provide excellent resistance to contact, thermal insulation, a pleasing appearance, hygiene and easy assembly, perfect panel union is ensured through camlocks, which also make assembly easier.

 

0.00 KZT

Sandwich panels with male female junction, produced using the one shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at positive or negative temperatures. The Bigsystem panels from the PGS 112G Bs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly. A perfect union between panels and easy assembly is supported by the use of eccentric fixing hooks.

 

0.00 KZT

Sandwich panels with male female junction, produced using the one shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at positive or negative temperatures. The Bigsystem panels from the PGS 112G Bs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly. A perfect union between panels and easy assembly is supported by the use of eccentric fixing hooks.

0.00 KZT

Sandwich panels with tongue and growe junction produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Cs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

0.00 KZT

Sandwich panels with tongue and growe junction produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Bs2 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

 

0.00 KZT

Sandwich panels with tongue and groove joint produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Bs1 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

 

0.00 KZT

For certification of any food processing enterprise according to standards and compliance of HACCP, we propose wall protection to block disinfectant chemical liquid for wall panels,doors with joints of the floors of enterprises with stainless steel structures

0.00 KZT

Wall protection from AISI 304. Stainless steel construction is made individually according to the floor plan, welding and cleaning of welding proceed on the customers premises. After installation of the protections, important to filling with liquid concrete and proper weld the filling holes in protection

0.00 KZT

Wall and isthermal door protections
Stainless steel 304 construction

0.00 KZT

The automation for sliding doors SC type is based in a system with motorgear, thanks to the worm reduction gear, the door is manually-movable in case of power failure.

The motion transmission between the door leaf and the motorgear is via a toothed belt. The control box is made in white anti-corrosion IP65 ABS. The connections between the control and the motor are pre-wired thanks to a fast strong connector in the lower part of the ABS box.

The control software is an Incold exclusivity. The operating voltage is 220V, 50 Hz. The control of the door leaf positioning is controlled by an encoder installed in the motorgear. The adjustment of the door speed is controlled by an inverter and an encoder. A color display with

Touch screen technology, installed on the external side of the control box, allows to control the opening and closing of the door. Through the display you can easily adjust and control the door functions such as speedy, acceleration/ deceleration ramps, partial opening, automatic reclosing, count of the openings, status of the safety devices. The main crush-prevention safety device is a sensitive bar resistant type located on the vertical edge of the door leaf which, in case of collision with an obstacle, instantly blocks the door and reverses the motion, sending a signal to the panel by means of wireless system.

A “transmitter-receiver” photocell, in addition to the sensitive bar, prevents physical contact between the door leaf in motion and the obstacle, blocking the door instantly and reversing its motion in order to ensure the function and durability of the sensitive bar.

All doors model SC are in compliance with standard EN 13241-1 and 1 and are subject to initial type testing by a notified organization that has issued the marking. Therefore, all doors are marked with an identification label with the marking.

0.00 KZT

Door for “Controlled Atmosphere” cold rooms for preservation and ripening where the internal temperature is not lower than -5°C; it guarantees the hermtic seal of the cold room.

A - Frame in plastic material internally reinforced in steel, white, with gasket tightening handwheels to ensure the gas seal.

B - Leaf consisting of a sandwich in prepainted sheet RAL 9010 insulated with PUR density 41 kg/m3, perimetric rim in aluminium with a gas seal gasket along its perimeter, with a standard thickness of 9 cm. An inspection porthole cm 70 x 90 H is mounted on the door leaf.

C - Sliding Rail in anodized aluminium with carter.

D - Back rail for sliding and regulation, wall mounted; it enables the sliding motion and the seal of the gasket, without additional accessories mounted to the floor that could be obstructive.

E - Threshold, connected to the frame, can be in 2 different types according to the required use of the door.

F - Internal frame placed on the internal side of the cold room permits rapid fastening to the prefabricated panels.

 

0.00 KZT

The sliding doors series SC 09 TNG with rail passage suitable only for positive temperatures, consists of 6 main parts as described below.

A - Standard frame in plastic material, internally reinforced in steel, colour white.

B - Standard leaf consisting of a sandwich panel in prepainted sheet RAL 9010 insulated with PUR density 41 kg/m3, perimetric rim in anodized aluminium with a seal gasket along its perimeter.

  • Thicknesse available: 9 cm.

C - Standard sliding rail in anodized aluminium with carter in white prepainted aluminium.

D - Standard back rail for sliding and regulation, wall mounted, in anodized aluminium; it enables the sliding motion and the seal of the gasket, without additional accessories mounted to the floor that could be obstructive.

E - Threshold, connected to the frame, can be in 4 different types according to the required use of the door.

F - Internal frame in plastic material, colour white, placed on the internal side of the cold room, it permits rapid fastening to the prefabricated panels.

0.00 KZT

Series SC.L sliding doors available for temperatures above +4°C with ΔT < 16°C with Relative Humidity < 60%.

SCL sliding doors consisting:

A - Standard frame consisting of a sandwich panel in prepainted sheet (RAL 9010) insulated with PUR density 4 KG/m3, perimetric rim in anodized aluminium with a seal gasket along its perimeter. Thickness 7 cm.

B - Sliding system (Rail + Glider) in anodized aluminum.

C - Fixed external handle, in composite plastic material with grip in AISI 304 stainless steel piping.

D - Fixed internal handle in luminescent plastic material.

E - Lower rail system in stainless steel.

F - Rim hole door (optional) in AISI 304 stainless steel U-shaped section bars.

 

0.00 KZT

A - Standard white plastic frame reinforced internally with steel.

B - Standard leaf consisting of a sandwich panel in prepainted sheet RAL 9010 insulated with PUR density 41 kg/m3, perimetric rim in anodised aluminium with a sealing gasket along its perimeter. 9 cm thick only version TN.

C - Standard sliding rail in anodized aluminium complete with casing.

D - Standard back rail for sliding and regulation, wall mounted, in anodized aluminium.

E - Internal frame in white plastic, positioned on the inside of the cold room, allowing rapid fastening to the prefabricated panels.

Types of operation

  • Manual with independent movement of the doors.
  • Manual with simultaneous movement of the doors.
  • Automatic with simultaneous movement of the doors.

 

0.00 KZT