Accessories for aircompressors

Main | Spare parts and consumable | Accessories for aircompressors

Accessories for aircompressors

All safety valves have complete documentation and appropriate approvals required by the European regulation.

0.00 KZT
  • Brass valve.
  • Angle check valves with unloading connection.
0.00 KZT

Avialbale 2 options 1 and 3 phases

0.00 KZT

Set with filter and manometer

0.00 KZT

EFD - is an automatic condensate ejector, used, among others, in pressure tanks, filters or cyclone separators. Its capacity is 300 liters / h at a maximum pressure of 20 bar.

0.00 KZT

X-DRAIN - the indispensable system in modern condensate management. The automatic electromagnetically controlled check valve, based on continuous measurements of the condensate level in the tank, opens as needed and causes a continuous discharge of condensate from the compressed air system without pressure loss.

Condensate is formed during the process of cooling compressed air below the dew point temperature.
The water vapor accumulated in the compressed air becomes saturated and begins to condense into water. Larger water droplets accumulate in the lower regions of the system, and small drops are carried by the compressed air to receivers, threatening the safety of the entire system. Condensate management is standard in modern compressed air systems.

Here are the advantages of our automatically controlled condensate drain depending on the level of condensate in the tank:

  • High system reliability
  • Maximum efficiency
  • No pressure loss
  • Resistance to all compressor oils
  • No contamination by using an additional strainer
  • Alarm in case of failure
  • Easy check functionalities
  • Low costs of installation and servicing
  • Heater available as an option
0.00 KZT

Advantages:

  • Compact design allows you to connect the ejector in hardly accessible places
  • Setting the opening frequency
  • Setting the opening time
0.00 KZT

Advantages:

  • - Pressure regulation in the range of 0-12 bar
  • - High air throughput
  • - Reliable construction
  • - High efficiency in draining the condensate from the system
  • - Viewing the condensate level
  • - Adjusting the oil dosing
  • - Possibility to separate the filter from the oiler (when using a spray gun and an air wrench)
  • - Pressure gauge included
  • - Pressure gauge mounted on both sides
  • - Working temperature max. +50 C
0.00 KZT

Advantages:

  • Pressure regulation in the range of 1.5-10 bar
  • High air throughput
  • Reliable construction
  • High efficiency in draining condensate from the system
  • Viewing the condensate level
  • Adjusting the oil dosing
  • Possibility to separate the filter from the oiler (when using a spray gun and a wrench pneumatic)
  • Equipped with a pressure gauge
  • Wall mount
  • Operating temperature +5 +60C
0.00 KZT

Condensate

During the air compression process with oil-lubricated compressors, an oil-water condensate is formed, which contains 500 to 5,000 mg of oil per liter of condensate. According to the regulations in force, the oil content in the condensate discharged to sewage may not exceed 15 mg / liter. (Journal of Laws No. 116 of 10/12/91, item 503). WARNING! Any company that pollutes the natural environment, eg by discharging untreated condensate to sewage, must take into account financial penalties.

PCT condensate separator

The PCT separator in the water / oil separator area separates the oil from the condensate generated by compressed air systems. PCT provides efficient separation of oil from condensate by routing the condensate through the various separation steps.

Principles of PCT functioning

In the event that the condensate flows into the PCT, the oil is filtered off using various filter elements. The PCT condensate separator uses adsorption materials to remove excess oil. The lifetime of the first PCT filtration stage is determined by the amount of oil removed, not by the amount of condensate. The carbon element of the separator is only used for final cleaning and ensures target values ​​of <10 ppm are achieved. The professional design of PCT is extremely compact, light and at the same time maximizes ergonomic factors when carrying out routine maintenance.

Commercial benefits

  • Works with all condensate ejectors (electric, electromagnetic, mechanical).
  • Three models covering up to 15m³ / min compressor capacity offer flexibility in compressor capacity selection.
  • <10 ppm filtration
  • It separates mineral and synthetic oils

Technical benefits

  • Small footprint.
  • Light and easy element replacement.
  • Easy assembly and maintenance procedure.
  • Sample and extraction test / measurement trigger test for ppm values
  • Overfill safety indicator.
  • Possibility to connect various types of ejectors
0.00 KZT
Beverage industry plant engineering

Beverage industry plant engineering