Slaughter houses
deboning rooms

Main | Slaughter houses
deboning rooms

Consultancy, technologies suggestion, equipment supply

Studying customer's requirements

Pre-construction stage of the project (layouts, budgeting)

Civil construction supervision

Equipment supply installation and commissioning

Design and construction of slaughter houses and meat processing workshops

Apply international quality standard and working with customers preferences. Adapt European and American standard for slaughtering and meat processing all in accordance with Halal standard. Always taking into account local construction requirements with respect to food safety and safe working environment or HACCP aspect of design.

Technological support after-sales service

UpgradeModernization and expansion of existing production

Production automation

Optimization of the manpower. Re-design of facilities with technological development and the best equipment range provided by other supplier

Technological supportSlaughter and meat processing standards

Consultancy services in fresh meat storage and cold chain distribution.

Studying production targets and keeping constant quality of fresh product. Emphasis on preserving fresh meat with proper chilling and storage, choice of packaging solution and productions flow chart.

SparpartsOriginal spare parts trading and supply

Own warehouses with spare parts

24/7 contractual services for all warranty and post warranty on the supplied equipment. Replacement of old operating controls with the latest PLCs.

Slaughter houses
deboning rooms

Rapid roll up door suitable for negative temperature between -5° and -25 ° C.

It is self-repairing, in case the sheet comes out from the guides it will return inside the guides on the  next opening. The door is CE certified according to EN 13241-1. It is Silent: The sheet flows into guides provided with a brush system.

The safety against crushing is ensured by an optical safety barrier with Sender/receiver technology. Sheet: insulated, suitable for low temperatures, ice-free. Heating system on the side frame and on the upper guide. The motorgear is provided with encoder, safety catch device, and crank to open the door manually.

Frame: folded steel sheet and epoxy white painted RAL 9010. The electrical control box is resistant to impacts, complete with inverter, touch screen display, exclusive Incold software, emergency button and main switch. Power supply 220V 50 Hz.

0.00 KZT

Rapid roll up door suitable for positive temperature between 0° and 35 ° C.

It is self-repairing, in case the sheet comes out from the guides it will return inside the guides on the  next opening. The door is CE certified according to EN 13241-1. It is Silent: The sheet flows into guides provided with a brush system. The safety against crushing is ensured by an optical safety barrier with Sender/receiver technology.

Transparent windows in Cristal. The motorgear is provided with encoder, safety catch device, and crank to open the door manually. Frame: folded steel sheet and epoxy white painted RAL 9010. The electrical control box is IP65 in ABS case resistant to corrosion, complete with inverter, touch screen display, exclusive Incold software, emergency button and main switch and pre-wired connector.

Power supply 220V 50 Hz.

Accessories:

  • 2 black buttons Ø80 mm for supplementary opening.
0.00 KZT

Rapid fold-up door for positive temperature installations between 0° and 45° C and indoors.

Self-repairing: in case of shock, hinges welded to the tarp exit from the vertical uprights. They retract on their own at the following opening. CE marked in accordance with EN 132411 standard.

Wind resistance: Class 3. The mantle covering is bound to the side uprights owing to a system of hinges welded sideways to the tarp; the latter slide inside the selflubricating polythene vertical guides. Safety: ensured by light curtain  with system consisting of transmitter and receiver, in accordance with EN 12445.

0.00 KZT

PSI-F semi-insulating service doors are designed for indoor installation in conditioned areas with minimum working temperatures ≥ 12°C, ΔT ≤ 12°C, R.H. ≤ 60.

They can be supplied for installation on panel or on brick wall.

 

0.00 KZT

PSI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ΔT ≤ 12°C, R.H. ≤ 60%.

They can only be used as service doors and not for uses requiring a hermetic or thermal seal.

They can be supplied for installation on panel or brick wall.

0.00 KZT

The PCE-F series of hinged doors, available on both positive and negative temperature models, consist of 4 essential parts as specified below.

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating element.

B - Monolithic leaf in bended prepainted sheet white Ral 9010 with rigid polyurethane foam injected on the inside to act as thermal insulation. Along the perimetral edges, special rubber gasket guarantees the temperature seal. The hardware consists mainly of the exclusive handle model LH, complete with key lock and luminescent safety release on the inside and one or more helical hinges, adjustable with screws.

The leaf comes in 2 different thicknesses depending on the working temperature:

  • CE 07 TN for uses up to – 5°C
  • CE 09 BT for uses up to – 20°C

C - Threshold, connected to the frame, can be in 6 different types according to the required use of the door.

D - Internal frame in plastic material, colour white, placed on the internal side of the cold room, it permits a rapid fastening to the prefabricated panels.

 

0.00 KZT

The two leaves PCE-2B series of hinged doors, available for both positive and negative temperature, consist in 4 essential parts as listed below:

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating cable.

B - Two leaves consisting of: two supports in pre-painted sheet white RAL9010 surrounded by an anodized aluminium profile, with rigid polyurethane foam injected on the inside to act as thermal isolation. Along the edge in anodized aluminium, is seated a special gasket which guarantees the temperature seal.

On the semi-fixed leaf there is a central doorstop profile which guarantees the temperature seal in central position. In the low temperature version the central doorstop profile is equipped of an anti-condensation heating cable. The hardware consist mainly of: rotating handle fixed on the moving leaf, complete with key lock and internal safety release; internally to the semi-fixed leaf there is a key lock type espagnolette bolt, which allow the locking of the leaf both on the inferior and superior part on the closing position; two helical hinges, for each leaf adjustable with screws.

The leaf is furnished in two different thicknesses depending on the working temperature:

  • CE2B 07 TN for uses up to -5°C
  • CE2B 09 BT for uses up to – 20°C

C - The threshold connected to the frame can be of 4 different types according to the required use of the door.

D - Connecting profiles in stainless steel for fastening on prefabricated panel. An optional version has the counter frame in reinforced plastic material.

 

0.00 KZT

The PCE-E series of hinged doors, available on both positive and negative temperature models, consist of 4 essential parts as specified below.

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating element. It is complete with counterframe that serves to fasten it on prefabricated panels.

B - Leaf consisting of two supports in prepainted sheet white Ral 9010 surrounded by a profile in anodized aluminum with rigid polyurethane foam injected on the inside to act as thermal insulation. Along the edge in anodized aluminum, special rubber gasket guarantees the temperature seal. The hardware consists mainly of the exclusive handle model France, complete with key lock and luminescent safety release on the inside and one or more helical hinges, adjustable with screws. The leaf comes in three different thicknesses depending on the working temperature:

  • CE 07 TN for uses up to – 5°C
  • CE 09 BT for uses up to – 18°C
  • CE BT for uses up to – 30°C

C - Threshold, connected to the frame, can be in 4 different types according to the required use of the door.

D - Connecting profiles in stainless steel for fastening on prefabricated panels. An optional version has the counterframe in reinforced plastic material.

 

0.00 KZT

Trolleys for tubular tracks in galvanised steel or in AISI-304 stainless steel, with diabolo-type roller and 2 ball-bearing sets.

0.00 KZT

Sandwich panels tongue-and-groove joint with camlocks.

Manufactured in accordance with European standard EN 14509:2007, specifically designed for the construction of controlled temperatures and humidity rooms, food packaging rooms, clean rooms, ensure high performances of thermal insulation, aesthetic value, hygiene and rapid assembling.

0.00 KZT

Sandwich panels with tongue and groove joint produced with an air intake one shot system, consisting of 2 laminates made of PRFV (polyester reinforced with glass fibre also known as fibreglass) between which high density PUR foam is injected. Appropriate for the realization of cold rooms at both positive and negative temperatures, processing rooms, agricultural/food areas with highly aggressive agents such as dairies, cured meat factories, seafood/fish processing, and all food products in general.

Designed to provide excellent resistance to contact, thermal insulation, a pleasing appearance, hygiene and easy assembly, perfect panel union is ensured through camlocks, which also make assembly easier.

 

0.00 KZT

Sandwich panels with male female junction, produced using the one shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at positive or negative temperatures. The Bigsystem panels from the PGS 112G Bs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly. A perfect union between panels and easy assembly is supported by the use of eccentric fixing hooks.

 

0.00 KZT

Sandwich panels with male female junction, produced using the one shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at positive or negative temperatures. The Bigsystem panels from the PGS 112G Bs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly. A perfect union between panels and easy assembly is supported by the use of eccentric fixing hooks.

0.00 KZT

Sandwich panels with tongue and growe junction produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Cs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

0.00 KZT
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction