CEPI

Главная | Продукция "CEPI"

Продукция "CEPI"

With discharge valve.

0.00 KZT

System to reuse big bag in Big Bag Discharger.

0.00 KZT

Chain hoist to smooth loading bags the the Big Bag Discharger.

0.00 KZT

Weighed with dust exhaustion system.

0.00 KZT

Built in steel alloy, inspection and cleaning are easy and quick, doesn’t break impurities. Equipped with quick hook, grill removable for cleaning, electrical three phase motor, joints, security limit switch, basket with body in steel fusion, centrifuge with body in steel fusion and inside brush.

0.00 KZT

Circuation pump for heating liquid, equipped with valves set for the by-pass, capacity 500 lt/h.

Centrifuge for egg mix type A 20 in stainless steel 304, equipped with 0.37 kw electric motor, motor’s careening in satin-finished stainless steel, quick joint for connection, valves set for the by-pass.

Washing pump type cea 120/3v. Equipped with basis and three phases electical motor.

Magnetic centrifuge pump for brain, capacity 280 lt/min.

Monoscrew pump in stainless steel – cap 1,7 mc/h with intercepting valves. Pump body is stainless steel aisi 304, rotor in stainless steel aisi 316.

 
0.00 KZT

It’s a well-known problem of traditional butterfly valves that their limited leak-tightness ( 0.2 bar) becomes a critical issue during pneumatic conveyance, translating to either pressure drops or leaks depending on the nature of your conveyance system. The overall performance of your plant is slowed and product is dispersed in the environment.

To eliminate such problems we introduced the new Butterfly Valve VFTC, which boasts a leak-tightness up to 1.5 bar (six times higher), outside in cast iron, equipped with gasket in long-lasting anti-abrasive rubber, mechanical seal, disk in stainless steel and inductive limit switch.

Butterfly Valve VFTC guarantees faster and cleaner conveyance with no drops or leaks, and beyond. The quality of weighing on the hopper is also improved because air leakages don’t interfere with the weighing, which remain constant. Higher leak-tightness in the butterfly valve also considerably boosts the management of ATEX parameters in the hopper.

Lastly, operating temperature goes up to 100°C.

Mechanical seal and fortified gasket make the Butterfly Valve VFTC especially suitable for abrasive products such as sugar. They represent the highest value and most advanced technology on the market.

0.00 KZT

Contalitri per olio alimentare con uscita ad alta frequenza a contatto reed, nessun ingranaggio, corpo in acciaio inox 304, guarnizione PTFE, precisione +/- 0,5% valore letto. Contalitri volumetrico per olio e liquidi non conduttori a bassa viscosità, di portata min/max da 180 a 2300 litri. Contalitri magnetico con convertitore per liquidi ad alta viscosità (come sciroppo, glucosio, miele) (da 1000-10000 cps.) Portate min/max: da 900 a 40.000 lt/h. Contalitri massico in acciaio inox. Custodia compatta in alluminio IP 67, calibrazione 0,35%, 0,02g/ccm.

Contaimpulsi

Celle di carico costruite in acciaio inossidabile di tipo stagno ad alta precisione, con bulloni di ancoraggio, 5 metri di cavo di collegamento e supporto flessibile. Peso standard (10, 25, 50, 100, 150, 250, 500, 750, 1000, 1500 Kg) e possibile su misura.

Sonde capacitive per rilevazione di massimo e minimo livello, con alimentazione 24 V, contatto NA in scambio, vite di regolazione e taratura, raccordi e supporti e 1 metro di cavo elettrico. Sonde di livello a bandiera girevole con raccordo per ispezione, protezione IP 64 e alimentazione corrente alternata. Portasonda Ø 2 1/2 ” in acciaio INOX e asta di allungamento in acciaio inox con perno in acciaio inox. Sonda conduttimetrica di minimo e massimo livello per salamoia.

0.00 KZT

Mechanic for silo, built in stainless steel AISI 304. Maximum pressure: 270 mm circa, minimum pressure: 20 mm circa. Equipped with regulation bars with sigil and protection carter in steel.

0.00 KZT
  •  
  •  
  •  
  •  
  •  
  •  

Modular and extendible hermetic units for the accurate metering by weight of powdered minor ingredients.

Automatic metering of minor ingredients through modular and integrated units loaded manually or pneumatically thanks to direct suction of the product from the sack. Manual metering of micro ingredients through table.

High precision and reliability. No leftovers within the storing units or the dosing station. No powder leakage thanks to the suction system which acts directly on the unloading from each unit.

Fit for challenging products such as milk powder, cocoa powder, salt and others. The fixed scale in the TME model allow more batches and ultra fast discharge. New extraction system to avoid bridges in the hopper.

Manual loading or by suction
Level sensor
Bar code reading system
Table scale for manual metering of minor ingredients
Suction pipe to load ingredients directly from bags or loading from dedicated dump station
Self-cleaning filter

0.00 KZT

Variable capacity; both to fill silos and to feed the line.

Chain hoist to load bags
Antidust filter
Easy big bag change over device

0.00 KZT

Line

Vibrosifter to install on pneumatic conveyances for sugar or flour, comes in standard sizes. Equipped with: container in stainless steel, conveying reduction to avoid the formation of stale product, automatic removal of impurities on expulsion channel with spherical valve, sieving net in stainless steel, antivibration devices, connection to pneumatic line in and out, supporting structure in steel, motovibrator. Sifter capacity: the capacity can vary based on the type of sieved product and must be defined during the development of the project.

Gravity

Vibrosifter to install on line in gravity with double sifter. Equipped with container in stainless steel, conveying reduction to avoid the formation of stale product, automatic removal of impurities on expulsion channel, sieving net in stainless steel, antivibration devices, supporting structure in painted steel, vibrating group with motovibrator, entry from high and double exit.

Vibrosifter on bag unloading system

Vibrosifter kit to install on cones with diameter 1200 mm. Equipped with sieving net and fixing ring for assembling on bag unloading hoppers.

0.00 KZT

Diaphragm valve to tighten the discharge socket and avoid powder leakage in the Big Bag Discharger.

0.00 KZT

Variable capacity; both to fill silos and to feed the line.

Chain hoist to load bags
Antidust filter
Easy big bag change over device
Lump-breaker
 
0.00 KZT

CEPI является хорошо зарекомендовавшей себя компанией в области хранения, транспортировки, дозирования и автоматизации сыпучего сырья для всех видов промышленности.

Наша компания с 1985 году, разработала все необходимое для интеграции производства с высококонкурентным программным обеспечением для автоматизации, что также принесло нам множество наград за отличные инновации.

Сегодня рынок быстрый, но качество, эффективность и надежность продукции все больше влияют на качество. Вот почему в CEPI мы всегда стараемся быть на шаг впереди: взвешенный продукт (строго по образцу работы заказчика) с точки зрения как технических, так и информационных потребностей.

 

Мультилинии производства макаронных изделий

Мультилинии производства макаронных изделий

Проектирование и строительство промышленного холода

Проектирование и строительство промышленного холода