Spare parts and
consumable

Main | Spare parts and
consumable

Spare parts and
consumable

 

All safety valves have complete documentation and appropriate approvals required by the European regulation.

0.00 KZT
  • Brass valve.
  • Angle check valves with unloading connection.
0.00 KZT

Avialbale 2 options 1 and 3 phases

0.00 KZT

Set with filter and manometer

0.00 KZT

EFD - is an automatic condensate ejector, used, among others, in pressure tanks, filters or cyclone separators. Its capacity is 300 liters / h at a maximum pressure of 20 bar.

0.00 KZT

X-DRAIN - the indispensable system in modern condensate management. The automatic electromagnetically controlled check valve, based on continuous measurements of the condensate level in the tank, opens as needed and causes a continuous discharge of condensate from the compressed air system without pressure loss.

Condensate is formed during the process of cooling compressed air below the dew point temperature.
The water vapor accumulated in the compressed air becomes saturated and begins to condense into water. Larger water droplets accumulate in the lower regions of the system, and small drops are carried by the compressed air to receivers, threatening the safety of the entire system. Condensate management is standard in modern compressed air systems.

Here are the advantages of our automatically controlled condensate drain depending on the level of condensate in the tank:

  • High system reliability
  • Maximum efficiency
  • No pressure loss
  • Resistance to all compressor oils
  • No contamination by using an additional strainer
  • Alarm in case of failure
  • Easy check functionalities
  • Low costs of installation and servicing
  • Heater available as an option
0.00 KZT

Advantages:

  • Compact design allows you to connect the ejector in hardly accessible places
  • Setting the opening frequency
  • Setting the opening time
0.00 KZT

Advantages:

  • - Pressure regulation in the range of 0-12 bar
  • - High air throughput
  • - Reliable construction
  • - High efficiency in draining the condensate from the system
  • - Viewing the condensate level
  • - Adjusting the oil dosing
  • - Possibility to separate the filter from the oiler (when using a spray gun and an air wrench)
  • - Pressure gauge included
  • - Pressure gauge mounted on both sides
  • - Working temperature max. +50 C
0.00 KZT

Advantages:

  • Pressure regulation in the range of 1.5-10 bar
  • High air throughput
  • Reliable construction
  • High efficiency in draining condensate from the system
  • Viewing the condensate level
  • Adjusting the oil dosing
  • Possibility to separate the filter from the oiler (when using a spray gun and a wrench pneumatic)
  • Equipped with a pressure gauge
  • Wall mount
  • Operating temperature +5 +60C
0.00 KZT