ZIEGRA

Main | Products "ZIEGRA"

Products "ZIEGRA"

The ZBE 110-35 is a compact machine designed for floor mounting. It makes up to 110 kg per day and stores 35kg in an integrated ice storage bin and is a complete packaged ice machine including, ice maker, refrigeration and condenser in one unit.

 

Main Features

  • 110kg / 24h nominal capacity at 20°C air and 15°C water
  • Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Two sizes of ice flake available: micro and midi,  to suit a wide range of applications.
  • Water supply 14mm  ¾” BSP 
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Hygienic design with a sealed water system 
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks
  • Environmentally friendly natural refrigerant

Connections

C: Ice bin
D: Electrical cable / plug: Standard UK 3 pin
E: Water connection: ¾ BSP
F: Overflow: 14mm
G: Filter: Ziegra Single supplied as standard
H: Stop valve by customer
J: socket with 13amp fuse by customer

Dimensions

 

 

The ZBE 110-35 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

  • 1 x Electrical flex 3.5 metre
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose
  • 1 x Small ice scoop
  • 1 x Ziegra Single water filtration kit

Options

Drain pump: For applications where there is no floor level drain available. Ziegra recommend either a floor level drain or a support frame are used, but if neither of those are possible this is a lower cost option.

Water cooled condenser where air-cooling is not possible. Consumption cooling water: 50 litre per hour

E: water supply (ice production)
F: water discharge (eg auto water drain)
O: cooling water in
P: cooling water return or drainage, resp.

Stainless steel support  to raise the machine by 40cm, for applications where there is no floor level drain available and the customer does not want to rely on a drain pump.

Also useful if this model is not to be used on a bench to raise it to a more ergonomic height.

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

Hygiene +: Automatic flushing of system with water, includes auto water drain. Details on request.

Hygiene+: UV sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.
 

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

Spare filter cartridge: #ZUK9700040

Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.

0.00 KZT
  • 6,000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT

The ZBE 30-10 is a compact machine designed for floor mounting. It makes up to 30 kg per day and stores 10kg in an integrated ice storage bin and is a complete packaged ice machine including, ice maker, refrigeration and condenser in one unit.

 

Main Features

  • 70kg / 24h nominal capacity at 20°C air and 15°C water
  • Ice level control system included as standard
  • Granular flake ice made at optimum temperature of -0.5°C.
  • Two sizes of ice flake available: micro and midi,  to suit a wide range of applications.
  • Water supply 14mm  ¾” BSP 
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Hygienic design with a sealed water system 
  • External water filtration system supplied as standard.
  • Designed for continuous operation 24/7
  • Stainless steel construction
  • No moving parts in refrigeration circuit lowers risk of gas leaks
  • Environmentally friendly natural refrigerant

Connections

C: Ice bin
D: Electrical cable / plug: Standard UK 3 pin
E: Water connection: ¾ BSP
F: Overflow: 14mm
G: Filter: Ziegra Single supplied as standard
H: Stop valve by customer
J: socket with 13amp fuse by customer

Dimensions

 

 

The ZBE 30-10 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

  • 1 x Electrical flex 3.5 metre
  • 1 x Flexible 2 metre water supply hose
  • 1 x flexible 2 metre drain hose
  • 1 x Small ice scoop
  • 1 x Ziegra Single water filtration kit

Options

Drain pump: For applications where there is no floor level drain available. Ziegra recommend either a floor level drain or a support frame are used, but if neither of those are possible this is a lower cost option.

Water cooled condenser where air-cooling is not possible. Consumption cooling water: 50 litre per hour

E: water supply (ice production)
F: water discharge (eg auto water drain)
O: cooling water in
P: cooling water return or drainage, resp.

Stainless steel support  to raise the machine by 40cm, for applications where there is no floor level drain available and the customer does not want to rely on a drain pump.

Also useful if this model is not to be used on a bench to raise it to a more ergonomic height.

Hygiene +: Auto water drain

The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

Hygiene +: Automatic flushing of system with water, includes auto water drain. Details on request.

Hygiene+: UV sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.
 

Sanitiser solution: 5litre tub part # ZUK9700044

Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

Spare filter cartridge: #ZUK9700040

Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.

0.00 KZT
  • 8000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304

 

0.00 KZT

The Ziegra SWE 750TW makes 750kg per 24 hours of fresh water flake ice or 600kg per 24hrs of salt water ice. It is available in both standard UK and tropical versions.

 

  • 750 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 30 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 750-SG500 ice machine makes up to 750kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions. The machine is mounted on a 500kg slope fronted ice storage bin.

 

  • 750 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 750-BK400 makes up to 750kg of flaked ice into a 400kg elevated bin ready for use and features two 80kg capacity ice carts docked below the bin. The carts are filled by gravity by pulling a lever just above the cart, thus eliminating shovelling of ice from the bin.

 

  • 750 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 750-BK200 ice machine makes up to 750kg per 24 hours of flake ice and stores it ready for use in a 200kg elevated bin. A cart plugs in underneath the bin and ice is falls into the cart when a lever is pulled, eliminating manual unloading of the ice from the bin.

 

  • 750 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 750 ice machine makes up to 750kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions.

 

  • 750 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 750-SG300 ice machine makes up to 750kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions. The machine is mounted on a 300kg slope fronted ice storage bin.

 

  • 750 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra ZBE 750-S280 makes up to 750kg per 24 hours of flake ice in one of three sizes and stores it in a 280kg capacity slope fronted ice storage bin.

 

  • 750 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra UBE 7500 ice machine makes up to 7500kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions.

 

  • 7500 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304

 

0.00 KZT

The Ziegra ZBE 7500R ice machine makes up to 7500kg per 24 hours of flake ice in one of three sizes. Including a remote weatherproof condenser as standard, it requires professional installation by Ziegra engineers or other suitably qualified personnel. 

  • 7500 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304
0.00 KZT

The Ziegra UBE 5000-2 ice machine makes  up to 5000kg per 24 hours of flake ice in one of three sizes. It is available in both standard UK and tropical versions.

  • 5000 kg per day under the condition of + 20 ° C air and + 15 ° C water
  • Ice supply to the storage system under the ice maker
  • Water supply ¾ ”BSP / 14 mm
  • Overflow sensor provided by customer
  • System pressure 2-5 bar
  • Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
  • Water temperature + 5 ° С + 42 ° С
  • The frame is made of painted steel, on request it can be made of AISI304

 

0.00 KZT
  • 50000kg / 24h nominal capacity at 20°C air and 15°C water
  • Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
  • Overflow drain provided by customer  
  • Pressure water quality 2-5 bar
  • pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
  • Temperature of water + 5°C +30°C
  • Base plate painted steel or upon request in stainless steel AISI304
0.00 KZT

Ziegra Eismaschinen GmbH’ which is based near Hanover in Germany has been operating since 1957. Our extensive experience has made us one of the leading specialist companies in the world,  who deal exclusively with industrial ice machines and the technology associated with it.

More than 80 specialists work at ZIEGRA, concentrating on every aspect of ice. This experience along with our constant research and development make ZIEGRA the European benchmark for quality and innovation. To date, Ziegra ice machines are used in over 160 countries on all continents.

The machines are manufactured from high quality branded components from suppliers such as Bitzer, Bock, Danfoss, Siemens etc or produced by specialist companies in Germany.

Using state of the art technology, every Ziegra ice machine is manufactured and tested at the factory, during which comprehensive performance checks are carried out, before any machine is released for shipping.

We are one of the few manufacturers to offer all major commercial and industrial ice types including flake, scale, liquid and nugget. As well as our extensive range of standard ice machines, we also design and build ice machines to your bespoke requirements