Shrink wrapping machine 50-100 ppm EV-850-50

Main | Diary and beverage plants |Secondary packaging and palletizing | Shrink wrapping machine 50-100 ppm EV-850-50

Shrink wrapping machine 50-100 ppm EV-850-50

Production capacity on single lane up to 50 packs per minute
Production capacity on double lane up to 100 packs per minute
Installed power 105 kW
Air consuption 6 bar 30 l per cycle
Maximum pack dimensions on single lane 300 x 500 x 380 mm
Maximum size of the pads in one lane 650 x 300 mm
Maximum size of the pads in two lanes 280 x 280 mm

EV 850-50CC automatic continuous wrapping machine (for only film and/or film +pad, up to 50/100 ppm).

Technical data

Standard Basic Equipment
  • Linear and continuous movement.
  • Wrapping without welding with film overlapping under pack.
  • Product input conveyor belt with low friction coefficient thermoplastic chains.
  • Filled lines and product availability monitoring for automatic pack preparation.
  • Bottle grouping system with double set of electronically synchronized pneumatic barriers.
  • Easy regulation of format changes.
  • Simplified maintenance operation.
  • Product visibility and accessibility during all process stages.
  • Electronically and mechanically synchronized film feeding with product.
  • Film cutting with rotating blade.
  • Electronically monitored centralized printed film option.
  • Loading station for spare reel.
  • Electronically monitored reel unwinding for constant tension on film.
  • Manually operated welding bar for film joint at reel ending.
  • Electronic system for pack formation monitoring.
  • Protection devices at wrapping bar area with polycarbonate gates.
  • Two-stage reverse motion to release bottles blocked under dragging bars.
  • PLC and operative console (alphanumeric terminal) with command operation guidance (production speed, polyethylene length, etc.) and stop messages (polyethylene reel ending, emergency stops, lack of air pressure, pack without polyethylene, etc.).
  • Right or left side command panel as per Client request.
  • Automatic placement of cardboard pad under pack on single or double lane.
  • This system is set lengthways and feeding is performed through the machine’s lower part, with ample loading capacity and simple regulation for different sizes.
  • Lifting by conveyor belts on vacuum table, with pneumatic system to avoid wrinkle formation.
  • IP 65 electric motor protection according to IEC 529 regulations.
  • Protection of other electric components not under IP 54 according to IEC 529 regulations.
Options Description
Maximum reel diameter 400 mm
Maximum reel width 820 mm
Polyethylene thickness 60 to 90 micron
г. Алматы