Complete with a dispenser, a container for bone meal, a guide for feeding and safe cutting of semi-finished products and an electric motor brake.
The machine is made of aluminum and stainless steel. Available in two versions - three-phase or single-phase.

All models are equipped with:

• Electronic motor brake and portioner with fine adjustment mechanism.
• Solenoid operated door switch.
• Precise belt guide.
• Quick clamping device.
• Removable “feed - on and safe cut” guide.
• Height adjustable blade shield.
• Folding upwards table for cleaning.
• Speed control (on request).

Complete with a dispenser, a container for bone meal, a guide for feeding and safe cutting of semi-finished products and an electric motor brake.
The machine is made of aluminum and stainless steel. Available in two versions - three-phase or single-phase.

All models are equipped with:

• Electronic motor brake and portioner with fine adjustment mechanism.
• Solenoid operated door switch.
• Precise belt guide.
• Quick clamping device.
• Removable “feed - on and safe cut” guide.
• Height adjustable blade shield.
• Folding upwards table for cleaning.
• Speed control (on request).

Complete with a dispenser, a container for bone meal, a guide for feeding and safe cutting of semi-finished products and an electric motor brake.
The machine is made of stainless steel. 

All models are equipped with:

• Electronic motor brake and portioner with fine adjustment mechanism.
• Solenoid operated door switch.
• Precise belt guide.
• Quick clamping device.
• Removable “feed - on and safe cut” guide.
• Height adjustable blade shield.
• Folding upwards table for cleaning.
• Speed control (on request).

Complete with a dispenser, a container for bone meal, a guide for feeding and safe cutting of semi-finished products and an electric motor brake.
The machine is made of stainless steel. 

All models are equipped with:

• Electronic motor brake and portioner with fine adjustment mechanism.
• Solenoid operated door switch.
• Precise belt guide.
• Quick clamping device.
• Removable “feed - on and safe cut” guide.
• Height adjustable blade shield.
• Folding upwards table for cleaning.
• Speed control (on request).

Perfectly suitable for the dissection industry and for the use in slaughterhouses is the K800. The dissection of pork, beef and venison is no problem for this bandsaw. Also in the fishing industry this model finds its use, especially for the dissection of frozen tuna and other big, frozen fish.

The K800 can be equipped selectively with sliding- or swivel doors and is, because of the different table variants, perfectly suitable for every kind of product.

Perfectly suitable for the dissection industry and for the use in slaughterhouses is the K800. The dissection of pork, beef and venison is no problem for this bandsaw. Also in the fishing industry this model finds its use, especially for the dissection of frozen tuna and other big, frozen fish.

The K800 can be equipped selectively with sliding- or swivel doors and is, because of the different table variants, perfectly suitable for every kind of product.

The K440H model, additionally to its working table, has a sliding table seated on ball bearings. Higher and larger products can not only be sawed, but also exact portioned and dissected, thanks to the extended cutting height and the stronger motor.

Selectively, the K440H can be equipped with a smaller RS-table (see table K440RS).

The K440RS is the biggest model of the RS-Line and is equipped with a table made of caster bearings. In combination with the optional second speed this model allows for a precise portioning of fresh and frozen meat parts and fish blocks. Selectively, the bandsaw can be equipped with a bigger working table.

Because of the edgewise tiltable sliding table the bandsaws of our RS-Line offer better access and allow for an optimal hygienic cleaning.

The table of the K430RT consists of caster bearings. With this model is highly suitable for the dissection of bigger parts as the table facilitates the moving of big products enormously. The high performance bandsaw cuts clean and effortlesly through fresh meat as well as bones and frozen meat parts or fish blocks.

The table of the K430RT consists of caster bearings. With them this model is highly suitable for the dissection of bigger parts as the table facilitates the moving of big products enormously. The high performance bandsaw cuts clean and effortlesly through fresh meat as well as bones and frozen meat parts or fish blocks.

The second largest bandsaw of our RS-Line is the K380RS. This model is also equipped with a spherically seated sliding table, but bigger than the table of the K330RS model. In combination with the higher pass of cutting, extended cutting stroke and the optional second speed, this model allows for a precise portioning of meat and fi sh, fresh as well as frozen.

Because of the edgewise tiltable sliding table the bandsaws of our RS-Line offer better access and allow for an optimal hygienic cleaning.

The K330RS model is equipped with a spherically seated sliding table, which allows for a precise portioning of frozen meat parts and fi sh blocks. With its high cutting precision, very good cross section and a brilliant cutting performance, the K330RS is highly suitable for supermarkets, butcheries and the meat market.

Because of the edgewise tiltable sliding table the bandsaws of our RS-Line offer better access and allow for an optimal hygienic cleaning.

The economy model of our range of professional bandsaws. The higher blade speed and the topnotch cutting performance allow for the K330 to break down fresh and frozen hollow bones and meat parts.

For fine portioning of bigger quantities the K330S is equipped with a sliding table, which can be folded down sideways for dissections.

The smallest bandsaw from our range is the K260. Despite its very low space requirements, this models work table provides a wider area compared to the K220. Bigger meat parts like cutlets or shanks can be portioned due to the higher cutting side pass and the removable material pusher. Small quantities of tubular bones also can be processed.

Optimally the K260 finds its use in butcheries of small and medium sizes, as well as in the meat section at the supermarket or the meat market.

The table model K220 is ideal for the little butchery next door or the meat section at the supermarket. Parts of fresh meat as well as small quantities of bones do not pose any problems for the K220 at all.

The table saw can be combined with a fix or mobile undercarriage made of stainless steel, optionally.

Like all bandsaws from our product range, the K220 too can be ordered in both, either left or right sided operating version.