Module for extrusion of fibres | DONI®Stringformer

Main | Milk processing and cheese production |Stretching and cheese forming | Module for extrusion of fibres | DONI®Stringformer

Module for extrusion of fibres | DONI®Stringformer

GENERAL TECHNICAL DATA
Production output: 150÷200 kg/h
Power supply: 3,3 kW
Air consumption (6 atm): 150 l/min
Ice cold water consumption (3 atm): 260 kg/h

The module is designed for the extrusion of fibres with a diameter range of 6mm to 14 mm which are used for the production of figure shaped cheese. The cone tank is loaded with curd with a temperature of 65° to 68°С from DONI®Plastformer. After the man hole is closed air pressurised at 1 atm is inserted. At the same time the mould plate located at the base of the cone is heated and the cooling nozzles turned on. The strings with the required diameter flow out through the plate's openings and drop in a vat full of cold, low concentrate brine. After a short period of time the cooled strings are extracted manually and processed on a working table. The module is supplied with an autonomous electric system for heating of the mould plate. DONI®Stringformer is an assisting module which operates only in combination with DONI®Plastformer.

г. Алматы
Stew canning meat, sauces and vegetable lines production

Stew canning meat, sauces and vegetable lines production

Food processing plants cold rooms construction

Food processing plants cold rooms construction