Aerial rail for the skin room BLASAU

Main | Slaughter houses deboning rooms |Conserving cattleand sheep skin | Aerial rail for the skin room BLASAU

Aerial rail for the skin room BLASAU

In order to store the skins in the skin room, an aerial rail with hanging hooks is used.

Made up of:

  • Columns to support the structure, made of galvanised steel tubes, with plates that can be bolted to the floor.
  • Rail supporting structure, built with IPN rails, finger clamps, attachment plates and screws to attach all the elements together, avoiding the need for welding, which can ultimately cause problems with rust. Made of galvanised steel.
  • Running rail consisting of two U-shaped 50x29 mm rails, which are made of AGST5 aluminum alloy, with a rolling side, a guiding surface for the carts and T-slot to allow the support brackets to be attached with bolts without welding or drilling.
  • Rail support brackets made of L-2640 aluminum to keep the rails parallel. The rails are spaced 18 mm apart to suspend the rail from the secondary structure using flanges and screws.
  • 90° curves and angles with the same characteristics as the running rail,
  • Finger clamps.
  • Stainless steel screws between the rail and the support brackets, and also between the support brackets and the secondary structure.


г. Алматы