Spare parts and
consumable

Continuosly kills micro-organisms in the incoming water supply.

• Models applicable: All granular flake and nugget ice machines
• Water: Freshwater or saltwater
• Construction: Stainless Steel
• Pressure range: 2 - 6 bar
• Temperature range: 5°C to 40°C
• Dimensions (reactor): 350mm x ø 65mm
• Packed dimensions: 106 x 106 x 600mm
• Packed weight: 3.0kg

Reduces scale, dirt and sediment in the water supply.

• Models applicable: All granular and nugget flake ice machines 500kg +
• Water: Freshwater
• Construction: Polymer
• Dimensions: 410 x 410 x 120 mm
• Weight: 3.2kg
• Packed dimensions: 500 x 410 x 200mm
• Packed weight: 4.5 kg

Reduces water related ice machine problems caused by dirt and sediment in the water supply.

• Models applicable: All SWE granular flake ice machines
• Water: Seawater and freshwater
• Construction: Polymer
• Dimensions: 410 x 410 x 120mm
• Weight: 3.2kg
• Packed dimensions: 500 x 410 x 200mm
• Packed weight: 4.5kg

The Grundfos digital dosing control is used for very precise dosing. The DME-type stepper pump motor rotates continuously, so that the material flows parallel to the suction. The engine automatically sets the dosage speed, while guaranteeing the required flow rate. The DMS motor rotates at a constant speed, stopping only between cycles. By automatically increasing or decreasing the speed, the DMS metering pump can adjust the flow rate to suit your requirements. For two types of metering pumps, dosing can be controlled remotely, analogously or manually.

Grundfos series DDA/DDC/DDE

The DDA, DDC and DDE models set new standards at dosing rates of up to 30 l/h and 16 bar. The DDA model is the pump for complex and demanding applications where the focus is on maximum process reliability. The DDC impresses with features such as simple, intuitive click-wheel operation and a graphic LC display. The DDE is the cost-effective entry-level model with all the benefits of Digital Dosing.

All safety valves have complete documentation and appropriate approvals required by the European regulation.

• Brass valve.
• Angle check valves with unloading connection.

Avialbale 2 options 1 and 3 phases

Set with filter and manometer

EFD - is an automatic condensate ejector, used, among others, in pressure tanks, filters or cyclone separators. Its capacity is 300 liters / h at a maximum pressure of 20 bar.

X-DRAIN - the indispensable system in modern condensate management. The automatic electromagnetically controlled check valve, based on continuous measurements of the condensate level in the tank, opens as needed and causes a continuous discharge of condensate from the compressed air system without pressure loss.

Condensate is formed during the process of cooling compressed air below the dew point temperature.
The water vapor accumulated in the compressed air becomes saturated and begins to condense into water. Larger water droplets accumulate in the lower regions of the system, and small drops are carried by the compressed air to receivers, threatening the safety of the entire system. Condensate management is standard in modern compressed air systems.

Here are the advantages of our automatically controlled condensate drain depending on the level of condensate in the tank:

• High system reliability
• Maximum efficiency
• No pressure loss
• Resistance to all compressor oils
• No contamination by using an additional strainer
• Alarm in case of failure
• Easy check functionalities
• Low costs of installation and servicing
• Heater available as an option