Find

130kg insulated ice storage bin with ice access through a sloped door located at the top of the bin. The bin sits of four adjustable legs for a more comfortable working height.

The top of the bin can be cut to suit direct mounting of any of our small flake or nugget ice machines from 150 to 375 kg/24h capacity. 

• Cabinet: stainless steel

• Internal finish: Polyethylene lined
• Insulation material: Non cfc polyurethane foam
• Shipping dimensions: 1 piece: (1.32 x 0.91 x 1.3m high)
• Shipping weight: 65 kg
• For ice machines: ZBE/ZNE models, capacities from 150kg to 1,200kg / 24h

280kg insulated ice storage bin with ice access through a sloped door located at the top of the bin. The bin sits of four adjustable legs for a more comfortable working height.

• Cabinet: stainless steel

• Internal finish: Polyethylene lined
• Insulation material: Non cfc polyurethane foam
• Shipping dimensions: 1 piece: (1.32 x 0.91 x 1.3m high)
• Shipping weight: 105 kg
• For ice machines: ZBE/ZNE models, capacities from 150kg to 1,200kg / 24h

The cart docking station consists of a frame to support and ice machine over a 100kg insulated ice cart. Once the cart is full a lever is pulled to seal off the ice machine so the cart can be removed without ice spilling on the floor. A buffer tray sits between the ice machine and frame and allows the machine to remain running for a short while while the cart is being used or swapped.

• Cabinet: stainless steel
• Internal finish: Polyethylene lined
• Insulation material: Non cfc polyurethane foam
• Shipping dimensions: 1 piece: (1320 x 910 x 1300mm high)
• Shipping weight: 91 kg
• For ice machines: ZBE/ZNE models, capacities from 150kg to 1,200kg / 24h

400 kg insulated ice storage bin on a support frame with two 80kg carts that dock below the bin. The cart is filled by gravity by pulling a lever, thus eliminating the arduous task of shovelling ice from the bin.

• Cabinet: stainless steel

• Internal finish: Polyethylene lined
• Insulation material: Non cfc polyurethane foam
• Shipping dimensions: 1 piece: (1640 x 1320 x 2440mm high)
• Shipping weight: 390 kg
• For ice machines: ZBE/ZNE models, capacities from 150kg to 1,200kg / 24h

Reduces scale, dirt and sediment in the water supply.

• Models applicable: All granular and nugget flake ice machines up to 400kg
• Water: Freshwater
• Construction: Polymer
• Dimensions: 50 x 100 x 500 mm
• Weight: 1.1kg
• Packed dimensions: 106 x 106 x 600 mm
• Packed weight: 1.7 kg

Continuosly kills micro-organisms in the incoming water supply.

• Models applicable: All granular flake and nugget ice machines
• Water: Freshwater or saltwater
• Construction: Stainless Steel
• Pressure range: 2 - 6 bar
• Temperature range: 5°C to 40°C
• Dimensions (reactor): 350mm x ø 65mm
• Packed dimensions: 106 x 106 x 600mm
• Packed weight: 3.0kg

Reduces scale, dirt and sediment in the water supply.

• Models applicable: All granular and nugget flake ice machines 500kg +
• Water: Freshwater
• Construction: Polymer
• Dimensions: 410 x 410 x 120 mm
• Weight: 3.2kg
• Packed dimensions: 500 x 410 x 200mm
• Packed weight: 4.5 kg

Reduces water related ice machine problems caused by dirt and sediment in the water supply.

• Models applicable: All SWE granular flake ice machines
• Water: Seawater and freshwater
• Construction: Polymer
• Dimensions: 410 x 410 x 120mm
• Weight: 3.2kg
• Packed dimensions: 500 x 410 x 200mm
• Packed weight: 4.5kg

Food and Beverage

To complete the range of “turnkey” products, Uni-Tech has developed a business unit specialised in process technologies in the food & beverage sector.

In regards to “beverage”, in addition to traditional machines such as saturators, premix systems and pasteurisers, our production also includes a CSD syrup production room, juice preparation rooms, and rooms for the receiving and transformation of dairy products.

The height of automation is achieved through the control rooms, where the entire process is developed. Moreover, for the mineral water sector, Uni-Tech has developed important expertise in water treatment systems, using the most sophisticated technology, from ozone through to ultra-filtration.
In collaboration with specialised companies, Uni-Tech also offers the production of purées and juices starting directly with the fruit, vegetables and tomatoes.

Complete systems

There is often a very close synergy between the processing and packaging systems, where a connection is nonetheless required. For this reason, AMS Ferrari has developed machines to connect the processing and packaging systems of several products.

Premix systems – Saturators – Pasteurisers – Filters, Tanks, Pressing systems
The Uni-Tech technical department is available to propose custom solutions based on client requirements.

Single, double or triple-plane tanks are designed for raw material processing in the food industry. The insulation is made of mineral wool or poly-urethan foam. The insulation is covered with firmly welded sheet. The heating or cooling coat is able to work with pressures of no more than 3.5 bars to be made in quilted coat, serpent pipe or rectangular dithes technology depending on working conditions.

The tanks applications:

• making liquid at various content and acidity fiat preventing from stored liquif splitting 
• liquid with add-ons mixture 
• liquid mixture to intesify processes 
• sirup and other liquid preparation.

Basic equipment is as following:

• W1 - bottom mainhole,
• W2 - upper mainhole,
• P1 - pipe liquid gauge,
• P2 - hydrostatic level measurement,
• O1 - vent with a net,
• C1 - CIP system,
• K1 - release / power connector,
• K2 - level sensor connector,
• K3 - temeperature sensor connector,
• K4 - aseptic samples dispenser tap,
• M1 - sideways mixer,
• M2 - up-right mixer.

The tanks design and make enable their washing using CIP system. The CIP system enables washing the components to be the tank equipment such as mixers, mainholes et cetera. Selected variants can be additionally sterilized with steam.  

Single-station CIP with steam-heating e ozonized water flush CIP – SIP – Skid:

• Single station CIP
• Cold or hot SIP
• Preassembled skid
• R&D pilot group

Project of blending for drink mixing and preparation will be designed according specification of final customer