Find

The Ziegra ZNE 300-K45 ice machine makes up to 300kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

• 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 300-S280 ice machine makes up to 300kg of nugget ice and sits on an S280 slope fronted ice storage bin, which stores 280kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 300-BK200 ice machine makes up to 300kg of nugget ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

• 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 500-SG500 ice machine makes up to 500 kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500 kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 500-SG500 ice machine makes up to 500 kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500 kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 500-BK200 ice machine makes up to 500kg of nugget ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

• 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 630kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 400 kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 400 kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE1.000-SG500 ice machine makes up to 1,000kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

TECNA HF-P is the electropneumatic hot filling solution suitable for still beverages, in PET bottles, with controlled recycling in the filling valve to maintain the filling temperature (85-89°C). The filling valve, electropneumatic controlled, is by level, short tube of small diameter, to avoid damages to bottles necks. The product to be filled can be deflected into the container by a swirl system, at the same time the inflowing product displaces the air in the bottle, which is returned to the filling tank through the vent tube. Each filling valve is equipped with a pneumatic recirculation valve with a teflon membrane which allows, in the event of lowering of the temperature, to recirculate the product directly, keeping it warm. In the case of continuous and constant production, the recirculation valves are closed ensuring a zero recirculation flow rate. The interface with the product pasteurizer is easy and the architecture with an external buffer tank for the product allows to avoid the process stop in case of speed fluctuations or short stops of the line. The possibility to have a light vacuum filling also allows to fill products with higher density. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in the changes due to the different products. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided.

TECNA HF-V is the electropneumatic hot filling solution suitable for still beverages, in glass bottles, with controlled recycling in the filling valve to maintain the filling temperature (85-89°C). The filling valve, electropneumatic controlled, is by level, short tube of small diameter, to avoid damages to bottles necks. The product to be filled can be deflected into the container by a swirl system, at the same time the inflowing product displaces the air in the bottle, which is returned to the filling tank through the vent tube. Each filling valve is equipped with a pneumatic recirculation valve with a teflon membrane which allows, in the event of lowering of the temperature, to recirculate the product directly, keeping it warm. In the case of continuous and constant production, the recirculation valves are closed ensuring a zero recirculation flow rate. The interface with the product pasteurizer is easy and the architecture with an external buffer tank for the product allows to avoid the process stop in case of speed fluctuations or short stops of the line. The possibility to have a light vacuum filling also allows to fill products with higher density. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in the changes due to the different products. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided.

The monoblock is an integrated system to perform every phase in a controlled environment. All the processes are done in an area where there is an overpressure of sterile air (LAMINAR FLOW). In the upper part of the monoblock there is a stainless steel cover supported by the safety guards in order to reduce contamination coming from the outside during the critical processes of cleaning, filling and closing. A system of high efficiency HEPA filters introduce sterile air into the machine. After the filling phase, the containers are moved inside a synchronized monoblock without any product spillage before and during the closing phase.
A precisely timed drop of liquid Nitrogen (NL2) can be dosed into the headspace.

COVERS
The capping turret can close different kinds of cover made from different kinds of material in accordance with the Customer’s specifications

CONTAINER AND COVER SANITIZING
The empty containers and the covers can be sanitized with different kinds of cleaning media in accordance with the Customer’s specifications.

PRODUCTS
It is possible to fill from liquid to very dense products with or without pieces.

Zilli & Bellini monoblocks are suitable to fill and close food products or flat soft drinks in round or shaped bottles made of glass and plastic materials.

The idea of the monoblock is to have more than one station installed in the same base frame: in this way it is possible to have an integrated system to clean, fill and close the containers.

One of the advantages of this solution is that the containers, after the filling phase, are moved in a synchronized monoblock in order to eliminate spillage of the product before the closing phase. We also eliminate any damage of the packaging.

A precisely timed drop of liquid Nitrogen (NL2) can be dosed into the headspace.

COVERS
The capping turret can close different kinds of cover made from different kinds of material in accordance with the Customer’s specifications

CONTAINER CLEANING
The empty containers can be cleaned with different kinds of cleaning media in accordance with the Customer’s specifications.

PRODUCTS
It is possible to fill from liquid to very dense products with or without pieces.

Zilli & Bellini filling and seaming groups are suitable to fill and seam food products or flat soft drinks in tin plate and aluminium cans.

The advantage of the filler – seamer group is the mechanical synchronization, with only one drive, which can smoothly drive the filled containers to the seamer without spillage.

COVERS
The seamers can handle open top, easy open and easy peel lids

PRODUCTS
It is possible to fill from liquid to very dense products with or without pieces.