Find

The Ziegra ZSM 2500 ice machine makes up to 2500kg per 24 hours of scale ice

• 2500kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply   10 - 12mm plain tube - chrome brass  20/22mm Ø SS plain ended tube  3/8" plug PVC     
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 3000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 1/2” BSP chromed brass  20/22mm Ø SS plain ended tube  3/8" plug PVC   
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 6,000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 8000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 10000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 1/2" flare nut - brass  21.3 x 2.8mm Ø SS plain ended tube
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 1500kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply   1/2" BSP - chromed brass  10/22mm Ø SS plain ended tube  1/2" plug - pvc       
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 50000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

Electro-pneumatic filling solution suitable for filling carbonated drinks in glass bottles. A quick selection of the filling recipes, by operator touch screen, also allows different steps of pre-evacuation phases. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling.
The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and when the level in the bottle comes to close the vent tube, the filling stops and the filling valve closes again.
The self level correction system, if present, optimizes the accuracy of the fill level in case of narrow bottle neck. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided.

Electro-pneumatic filling solution suitable for filling carbonated drinks in glass and pet bottles. A quick selection of the filling recipes, by operator touch screen, also allows different steps of pre-evacuation phases. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling.
The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and when the level in the bottle comes to close the vent tube, the filling stops and the filling valve closes again.
The self level correction system, if present, optimizes the accuracy of the fill level in case of narrow bottle neck. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided. A special bottles lifter, minimizing the format change over time, allows to handle glass bottles on the base and pet bottles by means of neck support.”

Electro-pneumatic filling solution suitable for the filling of carbonated and non carbonated beverages into PET bottles using a neck handling bottles movement. The bottle coming from air conveyor is lifted onto the filling valve using a pneumatic lifter equipped with neck-handling device. Empty bottle flushing with CO2, can be performed according to filling recipes selected on the touch-screen by operator. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling. The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and when the level in the bottle comes to close the vent tube, the filling stops and the filling valve closes again. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided.

Electro-pneumatic volumetric filling solution suitable for the filling of carbonated and non carbonated beverages into PET bottles using a neck handling bottles movement. The bottle coming from air conveyor is lifted onto the filling valve using a pneumatic lifter equipped with neck-handling device. Empty bottle flushing with CO2, can be performed according to filling recipes selected on the touch-screen by operator. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling. The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and once the quantity of product, set in the recipe, has been delivered, the magnetic flowmeter closes the filling valve. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times.

Isobaric, volumetric filling system with electropenumatically controlled valve suitable for filling of carbonated or non carbonated drinks in cans. The cans are placed under the filling valve without the traditional lifting system: it is the filling valve which, by lowering, guarantees a good sealing between can and filling valve. After the flushing phase with gas and next pressurization, the product valve opens and the product flows along the can wall, thus allowing gentle and no foam filling. Once the quantity of product, set in the recipe, has been delivered, the magnetic flowmeter closes the valve. After a settling phase, the decompression valve reduces the pressure in the head space of the can (even in multiple stages) and, after lifting the valve, the container can be transferred to the seamer. The versatile filling system allows, thanks to the recipes memorable in the PLC, great flexibility in the changes due to different products or different levels of carbonation. The format changes are quick with reduced intervention times for different can formats and no part of the filling valve to be replaced in the case of different lids (200,202 or 206).

The Ziegra ZNE 125-K45 ice machine makes up to 125kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

• 125 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 18 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 42 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 125-BK150 ice machine makes up to 125kg of nugget ice per 24 hours into a 150kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

• 125 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 18 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 125-S130 ice machine makes up to 125kg of nugget ice and sits on an S130 slope fronted ice storage bin, which stores 130kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 125 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304