Find

High output, small production equipment complete with continuous feeding of filling
Output over 300 Kgs per hour

Small pasta line by exceptional performances, considering high output of well over 300 Kgs per hour, and extreme flexibility (several diameters and lengths can be produced): furthermore, the pasta extruder can be used to produce short, long and sheet pasta.
Prices are extremely low thanks to simple manufacturing.

This pasta equipment is composed of the following:

• 1 pc. extruder mod. MAC 100 VR equipped with speed variator;
• 1pc. filling-feeding pump with speed variator for quantity dosage, fully dismountable and washable;
• 1 pc. star-shaped die, fully dismountable and washable composed of interchangeable inserts for cannelloni, max. diameter 40 mms., min. diameter 18 mms.;
• 1 pc. pneumatic-, guillotine cutting device composed of 2 off conveyor mats with adjustable speed and height. This device can be fitted in front of the pasta die or after the Pasteurizer or Cooker.

Made in stainless steel it is particularly suitable to be used in production lines of fresh pasta coupled with automatic sheeters or extruders for lasagne or tagliatelle production.
It can also be used coupled with cookers for lasagne and pre-cooked cannelloni in cooking lines.
The refining rollers can be made in ground steel or in thickness-chromed iron, they feature variable diameter depending on models and width and are equipped with scrapers in teflon-coated brass, taking into consideration the large variety of models.

Model equipped with the following:

• Electronic speed variator
• Optic-eye for automatic check of sheet pasta tension
• Side-knives for sheet pasta trimming

Made in stainless steel it is particularly suitable to be used in production lines of fresh pasta coupled with automatic sheeters or extruders for lasagne or tagliatelle production.
It can also be used coupled with cookers for lasagne and pre-cooked cannelloni in cooking lines.
The refining rollers can be made in ground steel or in thickness-chromed iron, they feature variable diameter depending on models and width and are equipped with scrapers in teflon-coated brass, taking into consideration the large variety of models.

Model equipped with the following:

• Electronic speed variator
• Optic-eye for automatic check of sheet pasta tension
• Side-knives for sheet pasta trimming

Made in stainless steel it is particularly suitable to be used in production lines of fresh pasta coupled with automatic sheeters or extruders for lasagne or tagliatelle production.
It can also be used coupled with cookers for lasagne and pre-cooked cannelloni in cooking lines.
The refining rollers can be made in ground steel or in thickness-chromed iron, they feature variable diameter depending on models and width and are equipped with scrapers in teflon-coated brass, taking into consideration the large variety of models.

Model equipped with the following:

• Electronic speed variator
• Optic-eye for automatic check of sheet pasta tension
• Side-knives for sheet pasta trimming

Made in stainless steel it is particularly suitable to be used in production lines of fresh pasta coupled with automatic sheeters or extruders for lasagne or tagliatelle production.
It can also be used coupled with cookers for lasagne and pre-cooked cannelloni in cooking lines.
The refining rollers can be made in ground steel or in thickness-chromed iron, they feature variable diameter depending on models and width and are equipped with scrapers in teflon-coated brass, taking into consideration the large variety of models.

Model equipped with the following:

• Electronic speed variator
• Optic-eye for automatic check of sheet pasta tension
• Side-knives for sheet pasta trimming

Equipped either with laminating group (for products obtained from sheet pasta) or spreading cone (for products obtained directly from pasta die) upon demand

Stainless steel version available

Suitable for continuous productions; fully automatic running controlled by PLC with relevant keyboard enables moulding of nests of the desired dimensions, shapes and lengths, as well as lasagne, automatically spread onto the drying looms and obtained either from laminated sheet pasta or from a pasta die; width of sheet mms. 510 (upon demand up to mms. 540).

Upon demand the machine can be equipped with the following:

• Laminating unit for adjustment of sheet-pasta thickness, made up of couple of chromed, ground rollers
• Automatic loom-feeding device featuring output of 8 pcs. looms cms. 60x120 with automatic loom-forwarding
• Loom support after moulding, equipped with pre-drying fans
• Equipped with electronic speed variator suitable for direct coupling with sheeter or extruder.

Technical features of Nesting machine:

• Interchangeable cutting groups
• Pneumatic system of tube lifting for nest moulding of various sizes (upon demand)
• Cross cutting group made up of temporised blade for determination of tagliatelle length, synchronised with loom-forwarding device.

Technical features of Lasagne machine:

• Longitudinal cutting group made up of adjustable-position rotative blades for determination of lasagna width and side trimming
• Cross cutting group made up of temporised blade for determination of lasagne length, synchronized with loom-forwarding device.

Equipment supplied upon demand:

• Special version with expanding cone for production of flat-, round-, oval-, waved-section nests (e.g. “reginette”) obtained from pasta die
• Special version in stainless steel with direct discharge onto the pasteuriser net for production of fresh, nest-shaped “tagliatelle”.

Pasta machine functioning electro-pneumatically for automatic cutting and stacking of fresh lasagne Equipped with cutting groups this machine is also used as cutter - sheet-cutter for tagliatelle and long pasta

• The lasagne machine-cutting machine is suitable for automatic production lines of fresh pasta obtained either from sheet or from pasta die.
• This pasta machine can operate in two modes, lasagne or tagliatelle, and is made up of a conveyor belt for sheet pasta or for long pasta, a cutting group for tagliatelle, a cross-cutting group (or guillotine) and a unit for lasagne stacking.
• The PLC-equipped electric control panel automatically controls machine operation in the two running modes.

Lasagna mode

• Featuring automatic stacking device for lasagne sheets to be packaged in trays.
• A piece-counting device enables to stack the desired quantity of pasta sheets and then discharge them onto a conveyor belt located underneath.
• A version is available equipped with suitable device to put a sheet of paper between each sheet of pasta.

Tagliatelli and other shape of long-cut pasta mode:

Featuring interchangeable cutting groups and pneumatic cross-cut to determine cutting length and relative weight.

Front delivery automatic sheeter to continuously feed one or two moulding machines

The machine has been designed and manufactured to continuously and simultaneously feed two ravioli and cappelletti machines or a double-sheet ravioli machine.

The sheeter can also operate by one exit because it is equipped with two independent motorization systems.
The rolling shafts and cylinders are fitted horizontally.

The particular opening of the shutters enables careful cleaning of the internal parts, carried out under the maximum safety conditions for the operator. 
The laminating-shaft group is equipped with distanced mechanics.

All parts in contact with the product are in stainless steel AISI 304.

Front delivery automatic sheeter to continuously feed one or two moulding machines

The machine has been designed and manufactured to continuously and simultaneously feed two ravioli and cappelletti machines or a double-sheet ravioli machine.

The sheeter can also operate by one exit because it is equipped with two independent motorization systems.
The rolling shafts and cylinders are fitted horizontally.

The particular opening of the shutters enables careful cleaning of the internal parts, carried out under the maximum safety conditions for the operator. 
The laminating-shaft group is equipped with distanced mechanics.

All parts in contact with the product are in stainless steel AISI 304.

Front delivery automatic sheeter to continuously feed one or two moulding machines

The machine has been designed and manufactured to continuously and simultaneously feed two ravioli and cappelletti machines or a double-sheet ravioli machine.

The sheeter can also operate by one exit because it is equipped with two independent motorization systems.
The rolling shafts and cylinders are fitted horizontally.

The particular opening of the shutters enables careful cleaning of the internal parts, carried out under the maximum safety conditions for the operator. 
The laminating-shaft group is equipped with distanced mechanics.

All parts in contact with the product are in stainless steel AISI 304.

Front delivery automatic sheeter to continuously feed one or two moulding machines

The machine has been designed and manufactured to continuously and simultaneously feed two ravioli and cappelletti machines or a double-sheet ravioli machine.

The sheeter can also operate by one exit because it is equipped with two independent motorization systems.
The rolling shafts and cylinders are fitted horizontally.

The particular opening of the shutters enables careful cleaning of the internal parts, carried out under the maximum safety conditions for the operator. 
The laminating-shaft group is equipped with distanced mechanics.

All parts in contact with the product are in stainless steel AISI 304.

Front delivery automatic sheeter to continuously feed one or two moulding machines

The machine has been designed and manufactured to continuously and simultaneously feed two ravioli and cappelletti machines or a double-sheet ravioli machine.

The sheeter can also operate by one exit because it is equipped with two independent motorization systems.
The rolling shafts and cylinders are fitted horizontally.

The particular opening of the shutters enables careful cleaning of the internal parts, carried out under the maximum safety conditions for the operator. 
The laminating-shaft group is equipped with distanced mechanics.

All parts in contact with the product are in stainless steel AISI 304.