Find

The MP 208 XW is standard supplied with insert plates and equipped with an extra wide seal to engrave the bag and a cut-off wire to remove remaining flap. The metal filter on the suction opening prevents objects from being extracted by the vacuum pump.

• Standard with 1 program memory
• Standard Sensor control
• Metal filter
• Silicone holder for cliché

The MP 216 XW is standard supplied with insert plates and equipped with an extra wide seal to engrave the bag and a cut-off wire to remove remaining flap. The metal filter on the suction opening prevents objects from being extracted by the vacuum pump.

• Standard with 1 program memory
• Standard Sensor control
• Metal filter
• Silicone holder for cliché

The Ziegra ZSM 1.000TWF on board ice machine makes up to 1,000kg per 24 hours of scale ice from freshwater

• 1000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12mm plain end tube 
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 2500kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12 mm  22/25 mm PVC
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

The Ziegra ZSM 2500 ice machine makes up to 2500kg per 24 hours of scale ice

• 2500kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply   10 - 12mm plain tube - chrome brass  20/22mm Ø SS plain ended tube  3/8" plug PVC     
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 3000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 1/2” BSP chromed brass  20/22mm Ø SS plain ended tube  3/8" plug PVC   
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 6,000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 8000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 10000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 1/2" flare nut - brass  21.3 x 2.8mm Ø SS plain ended tube
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 1500kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply   1/2" BSP - chromed brass  10/22mm Ø SS plain ended tube  1/2" plug - pvc       
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

• 50000kg / 24h nominal capacity at 20°C air and 15°C water
• Water supply 10/12mm plain end tube - brass  1/2"bsp chromed brass  1/2" plug PVC
• Overflow drain provided by customer  
• Pressure water quality 2-5 bar
• pH-value  hardness drinking water  7.2 – 9.5 pH  6 – 14 °dH  100 – 250 mg CaCO3/l
• Temperature of water + 5°C +30°C
• Base plate painted steel or upon request in stainless steel AISI304

Electro-pneumatic filling solution suitable for filling carbonated drinks in glass bottles. A quick selection of the filling recipes, by operator touch screen, also allows different steps of pre-evacuation phases. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling.
The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and when the level in the bottle comes to close the vent tube, the filling stops and the filling valve closes again.
The self level correction system, if present, optimizes the accuracy of the fill level in case of narrow bottle neck. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided.

Electro-pneumatic filling solution suitable for filling carbonated drinks in glass and pet bottles. A quick selection of the filling recipes, by operator touch screen, also allows different steps of pre-evacuation phases. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling.
The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and when the level in the bottle comes to close the vent tube, the filling stops and the filling valve closes again.
The self level correction system, if present, optimizes the accuracy of the fill level in case of narrow bottle neck. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided. A special bottles lifter, minimizing the format change over time, allows to handle glass bottles on the base and pet bottles by means of neck support.”

Electro-pneumatic filling solution suitable for the filling of carbonated and non carbonated beverages into PET bottles using a neck handling bottles movement. The bottle coming from air conveyor is lifted onto the filling valve using a pneumatic lifter equipped with neck-handling device. Empty bottle flushing with CO2, can be performed according to filling recipes selected on the touch-screen by operator. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling. The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and when the level in the bottle comes to close the vent tube, the filling stops and the filling valve closes again. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided.

Electro-pneumatic volumetric filling solution suitable for the filling of carbonated and non carbonated beverages into PET bottles using a neck handling bottles movement. The bottle coming from air conveyor is lifted onto the filling valve using a pneumatic lifter equipped with neck-handling device. Empty bottle flushing with CO2, can be performed according to filling recipes selected on the touch-screen by operator. After bottle pressurization the filling valve will open and the product can flow, thanks also to a swirl system, along the bottle wall, thus allowing a gentle and no foam filling. The inflowing product displaces the gas in the bottle, which returnes to the filling tank through the vent tube and once the quantity of product, set in the recipe, has been delivered, the magnetic flowmeter closes the filling valve. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be also multiple stages) and than the container leaves the filling machine. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in changes due to different products or different carbonation levels. The format changes are quick and with reduced intervention times.