Find

The Transparent Flexible Doors of the CFD series are an effective barrier to the passage of air through isothermal doors in the event they remain open due to intensive traffic, whether pedestrian or trolleys. They offer maximum protection against heat loss, controlling energy consumption.

They are also a valid solution in case a dividing door with maximum visibility is required.

The CFD series doors are available in the single- or double-leaf versions, consisting of:

1. A special stainless steel and aluminium gravity hinge with two-way rotation forms the load-bearing structure of the door. Due to its special design, it closes the door automatically.
2. Transparent PVC mantle 3 mm thickness: Polar Type for operating at negative temperature from -20°C to 40°C

The absence of posts allows optimisation of the door opening, unlike the conventional "FLAP" doors. It is much more accessible compared to the traditional Strip Doors as it avoids the hassle of strips that fall against the operator, so passage is easier even when the user's hands are full.

They are easy to install and virtually maintenance-free.

Accessories available:

• Angular mounting bracket.
• Door opening edging profiles

The flap flexible doors in PVC, available in a double-door version, consist primarily of a sturdy structure in galvanised steel (painted or optional stainless steel) that sustains a flexible skirt of transparent PVC, suitable for use with positive temperatures or, upon request, with low temperatures, conveniently reinforced in high-stress points and complete with a torsion-spring reclosing mechanism.

They are available in 3 different versions:

1. Manual (as described above), operates with a simple push
2. Pneumatic touch, complete with actuation device consisting of two-way pneumatic pistons that allow the doors to open with a light push, in both directions, with a spring catch.
3. Electro-pneumatic, complete with actuation device consisting of one-way pneumatic pistons that allow the doors to open, in a single direction, following the activation of a remote control such as a photocell, radar, metal detector, button or pull-cord, with a torsion-spring reclosing system.

Rapid Fold door suitable for positive temperature between 0° and 35 ° C.

The door is CE certified according to EN 13241-1. It belongs to class 2 for wind pressure resistance. The primary safety against crushing is a safety edge. Secondary safety is ensured by photocells with sender/receiver technology installed on the frame.  Transparent windows in Cristal.

The motorgear is provided with encoder, safety catch device, and crank to open the door manually. Frame: galvanized sheet. The electrical control box is IP65 of painted metal sheet, complete with inverter, emergency button and pre-wired main switch.

Control box power supply 380V 50 Hz.

Accessories:

• 2 black buttons Ø80 mm for supplementary  opening.

Rapid roll up door suitable for negative temperature between -5° and -25 ° C.

It is self-repairing, in case the sheet comes out from the guides it will return inside the guides on the  next opening. The door is CE certified according to EN 13241-1. It is Silent: The sheet flows into guides provided with a brush system.

The safety against crushing is ensured by an optical safety barrier with Sender/receiver technology. Sheet: insulated, suitable for low temperatures, ice-free. Heating system on the side frame and on the upper guide. The motorgear is provided with encoder, safety catch device, and crank to open the door manually.

Frame: folded steel sheet and epoxy white painted RAL 9010. The electrical control box is resistant to impacts, complete with inverter, touch screen display, exclusive Incold software, emergency button and main switch. Power supply 220V 50 Hz.

Rapid roll up door suitable for positive temperature between 0° and 35 ° C.

It is self-repairing, in case the sheet comes out from the guides it will return inside the guides on the  next opening. The door is CE certified according to EN 13241-1. It is Silent: The sheet flows into guides provided with a brush system. The safety against crushing is ensured by an optical safety barrier with Sender/receiver technology.

Transparent windows in Cristal. The motorgear is provided with encoder, safety catch device, and crank to open the door manually. Frame: folded steel sheet and epoxy white painted RAL 9010. The electrical control box is IP65 in ABS case resistant to corrosion, complete with inverter, touch screen display, exclusive Incold software, emergency button and main switch and pre-wired connector.

Power supply 220V 50 Hz.

Accessories:

• 2 black buttons Ø80 mm for supplementary opening.

Rapid fold-up door for positive temperature installations between 0° and 45° C and indoors.

Self-repairing: in case of shock, hinges welded to the tarp exit from the vertical uprights. They retract on their own at the following opening. CE marked in accordance with EN 132411 standard.

Wind resistance: Class 3. The mantle covering is bound to the side uprights owing to a system of hinges welded sideways to the tarp; the latter slide inside the selflubricating polythene vertical guides. Safety: ensured by light curtain  with system consisting of transmitter and receiver, in accordance with EN 12445.

PSI-F semi-insulating service doors are designed for indoor installation in conditioned areas with minimum working temperatures ≥ 12°C, ΔT ≤ 12°C, R.H. ≤ 60.

They can be supplied for installation on panel or on brick wall.

PSI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ΔT ≤ 12°C, R.H. ≤ 60%.

They can only be used as service doors and not for uses requiring a hermetic or thermal seal.

They can be supplied for installation on panel or brick wall.

The PCE-F series of hinged doors, available on both positive and negative temperature models, consist of 4 essential parts as specified below.

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating element.

B - Monolithic leaf in bended prepainted sheet white Ral 9010 with rigid polyurethane foam injected on the inside to act as thermal insulation. Along the perimetral edges, special rubber gasket guarantees the temperature seal. The hardware consists mainly of the exclusive handle model LH, complete with key lock and luminescent safety release on the inside and one or more helical hinges, adjustable with screws.

The leaf comes in 2 different thicknesses depending on the working temperature:

• CE 07 TN for uses up to – 5°C
• CE 09 BT for uses up to – 20°C

C - Threshold, connected to the frame, can be in 6 different types according to the required use of the door.

D - Internal frame in plastic material, colour white, placed on the internal side of the cold room, it permits a rapid fastening to the prefabricated panels.

The two leaves PCE-2B series of hinged doors, available for both positive and negative temperature, consist in 4 essential parts as listed below:

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating cable.

B - Two leaves consisting of: two supports in pre-painted sheet white RAL9010 surrounded by an anodized aluminium profile, with rigid polyurethane foam injected on the inside to act as thermal isolation. Along the edge in anodized aluminium, is seated a special gasket which guarantees the temperature seal.

On the semi-fixed leaf there is a central doorstop profile which guarantees the temperature seal in central position. In the low temperature version the central doorstop profile is equipped of an anti-condensation heating cable. The hardware consist mainly of: rotating handle fixed on the moving leaf, complete with key lock and internal safety release; internally to the semi-fixed leaf there is a key lock type espagnolette bolt, which allow the locking of the leaf both on the inferior and superior part on the closing position; two helical hinges, for each leaf adjustable with screws.

The leaf is furnished in two different thicknesses depending on the working temperature:

• CE2B 07 TN for uses up to -5°C
• CE2B 09 BT for uses up to – 20°C

C - The threshold connected to the frame can be of 4 different types according to the required use of the door.

D - Connecting profiles in stainless steel for fastening on prefabricated panel. An optional version has the counter frame in reinforced plastic material.

The PCE-E series of hinged doors, available on both positive and negative temperature models, consist of 4 essential parts as specified below.

A - Frame in plastic material internally reinforced in steel. In the low temperature version it is equipped with a heating element. It is complete with counterframe that serves to fasten it on prefabricated panels.

B - Leaf consisting of two supports in prepainted sheet white Ral 9010 surrounded by a profile in anodized aluminum with rigid polyurethane foam injected on the inside to act as thermal insulation. Along the edge in anodized aluminum, special rubber gasket guarantees the temperature seal. The hardware consists mainly of the exclusive handle model France, complete with key lock and luminescent safety release on the inside and one or more helical hinges, adjustable with screws. The leaf comes in three different thicknesses depending on the working temperature:

• CE 07 TN for uses up to – 5°C
• CE 09 BT for uses up to – 18°C
• CE BT for uses up to – 30°C

C - Threshold, connected to the frame, can be in 4 different types according to the required use of the door.

D - Connecting profiles in stainless steel for fastening on prefabricated panels. An optional version has the counterframe in reinforced plastic material.

Sandwich panels with tongue and groove joint produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Bs1 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

Sandwich panels with tongue and growe junction produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Bs2 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

Sandwich panels with tongue and growe junction produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Cs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.