Diary and
beverage plants

• Roller conveyors, chain, hinge
• Wrapping machines
• Case Formers 
• Transfers 
• Turntables 
• Elevators 
• Dispensers / pallet stackers 
• Protection and safeties 
• Communication and networking with production control systems

SRNA 650 shrink film wrapper is an automatic machine designed for medium speeds (up to 15 pack/minute) and to supplement production lines of bottles, boxes, cases, jars, spray cans, etc. The equipment’s main advantages are easy operation, ample versatility and reduced format change times.

Technical data

Optionals

ECAS 650 shrinkwrapper with welding bar is an automatic machine that complements production lines of bottles, cans, boxes, jars, spray cans, etc. The equipment’s main advantages are easy operation and great versatility. Consequently, this machine ensures reduced format change times and minimized polyethylene reel replacement times.

ECAS 650 is the best cost-benefit-performance combination available within the market.

Technical data

Options

EV-750-35 continuous shrink film wrapping machine without welding bar, with film overlapping under pack.

A machine built according to top quality standards, available in multiple versions for bottles, cans, jars, spray cans, etc, with or without a cardboard pad and either on single or double lane. 

The equipment’s reliability for high speed production and flexibility for the most diverse product types are a result of technological expertise of Tecmi technicians after years of cooperation with the market’s biggest clients. 

Technical data

Technical Data

Optionals

EV-750-50 continuous shrink film wrapping machine without welding bar, with film overlapping under pack.

A machine built according to top quality standards, available in multiple versions for bottles, cans, jars, spray cans, etc, with or without a cardboard pad and either on single or double lane. 

The equipment’s reliability for high speed production and flexibility for the most diverse product types are a result of technological expertise of Tecmi technicians after years of cooperation with the market’s biggest clients. 

Technical data

Technical Data

Optionals

EV 850-50CC automatic continuous wrapping machine (for only film and/or film +pad, up to 50/100 ppm).

Technical data

The idea behind the development of the refrigeration dryers of the HDX-E series was to achieve a compact design in relation to the highest possible quality of the exhaust air. The heat exchanger circuit is filled with the environmentally friendly R134a refrigerant. The dehumidifier management system is fully automatic and optimized in terms of energy saving. The HDX-E dehumidifier includes: a refrigerant dryer, a fine filter, a final filter and an automatic condensate ejector. The HDX-E dehumidifier is therefore the ideal solution for the following applications:

• high
• quality painting - drying and cleaning
• pharmaceutical packaging
• cutting devices
• CNC machines  

The HDX-E dehumidifier is equipped with a control panel that allows for electronic control and monitoring of the device's operation. It has the following functionality:

• Malfunction alarm
• Low / high temperature alarm
• High pressure alarm
• Schedule for replacing air filter elements
• Management of the condensate drain ejector
• Energy saving mode

Strengths

• Control panel
• Integrated 1 µm fine filter and 0.01 µm post filter
• Easy service access
• Stable dew point
• Low pressure drop
• Low power consumption
• Energy saving mode
• High-quality electric fan
• Automatic fan relay
• High-quality dehumidifier compressor
• Reliable automatic condensate ejector
• Electrical insulation class IP54
• 3 in 1 aluminum heat exchanger 

The effectiveness of the statement

• - Gradation: 0.01 [µm]
• - Oil content: 0.01mg / m 3
• - Water content: 1.5g / m 3 to 0.6g / m 3
• - Outlet dew point at atmospheric pressure: 3 0 C

The screw compressor of the HIT-3G series is a comprehensive solution in the form of a compressed air source in the company, constructed on the basis of the latest world technologies associated with the highest quality materials. The HIT compressor is equipped with a microprocessor panel of the control system, which is a novelty in this class of compressors. This solution allows for easy and legible operation of the device. The system automatically detects irregularities in operation and informs by displaying the type of failure, and if there is a risk of damage to the compressor, it will turn it off 

HIT screw compressor - Description of components

L9 control panel

The HIT compressor is equipped with a microprocessor panel of the control system. It informs the user about the compressor's operating mode. The clear and detailed display provides information about:

• the device's defect through a detailed alarm code
• operating temperature of the screw module
• total number of hours worked and under load
• time remaining until the service inspection.
• fault memory function.
• Pressure under your control - By installing a pressure transducer, you can change the minimum and maximum pressure via the control panel. The working pressure is shown on the display in tenths of bar.

Automation

Modern automation, based on the highest quality components , protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Screw module

Made of the best components, the pump system of the HIT series compressor has one of the best efficiency ratios on the market in proportion to the engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.

Soundproof housing

The housing of the HIT screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 67 [dBA], which is one of the best results in this class of compressors. 

The screw compressor of the HIT-3G with air reciever series is a comprehensive solution in the form of a compressed air source in the company, constructed on the basis of the latest world technologies associated with the highest quality materials. The HIT compressor is equipped with a microprocessor panel of the control system, which is a novelty in this class of compressors. This solution allows for easy and legible operation of the device. The system automatically detects irregularities in operation and informs by displaying the type of failure, and if there is a risk of damage to the compressor, it will turn it off 

HIT screw compressor - Description of components

L9 control panel

The HIT compressor is equipped with a microprocessor panel of the control system. It informs the user about the compressor's operating mode. The clear and detailed display provides information about:

• the device's defect through a detailed alarm code
• operating temperature of the screw module
• total number of hours worked and under load
• time remaining until the service inspection.
• fault memory function.
• Pressure under your control - By installing a pressure transducer, you can change the minimum and maximum pressure via the control panel. The working pressure is shown on the display in tenths of bar.

Automation

Modern automation, based on the highest quality components , protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Screw module

Made of the best components, the pump system of the HIT series compressor has one of the best efficiency ratios on the market in proportion to the engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.

Soundproof housing

The housing of the HIT screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 67 [dBA], which is one of the best results in this class of compressors. 

Improvement of the galvanized tank for HIT screw compressors on the tank   

The item includes the replacement at the production stage of a standard, powder-coated pressure vessel with a galvanized (inside / outside) tank - Corrosion protection standard PN-EN ISO-1461. A 10-year warranty is provided for the galvanized pressure vessel.

The screw compressor of the HIT-3G series is a comprehensive solution in the form of a compressed air source in the company, constructed on the basis of the latest world technologies associated with the highest quality materials. The HIT compressor is equipped with a microprocessor panel of the control system, which is a novelty in this class of compressors. This solution allows for easy and legible operation of the device. The system automatically detects irregularities in operation and informs by displaying the type of failure, and if there is a risk of damage to the compressor, it will turn it off 

HIT screw compressor - Description of components

L9 control panel

The HIT compressor is equipped with a microprocessor panel of the control system. It informs the user about the compressor's operating mode. The clear and detailed display provides information about:

• the device's defect through a detailed alarm code
• operating temperature of the screw module
• total number of hours worked and under load
• time remaining until the service inspection.
• fault memory function.
• Pressure under your control - By installing a pressure transducer, you can change the minimum and maximum pressure via the control panel. The working pressure is shown on the display in tenths of bar.

Automation

Modern automation, based on the highest quality components , protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Screw module

Made of the best components, the pump system of the HIT series compressor has one of the best efficiency ratios on the market in proportion to the engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.

Oil-air cooler

Extremely effective, two-function cooler ensuring optimal working conditions in the most difficult working conditions of the compressor. It allows to achieve a low outlet temperature of the air to the pneumatic network. High-temperature hydraulic hoses are used to connect the cooler with the module .

Cooler connection flange - the upper structure of the compressor enables connection of an exhaust system in order to disperse heat around the facility.

Screw module with tensioner

Made of the best components, the SMART compressor pumping system has one of the best efficiency ratios on the market in proportion to engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.

Soundproof housing

The housing of the HIT screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 67 [dBA], which is one of the best results in this class of compressors. 

The screw compressor of the SMART with air reciever series is a comprehensive solution in the form of a compressed air source in the company, constructed on the basis of the latest world technologies associated with the highest quality materials. The SMART compressor is equipped with a microprocessor panel of the control system, which is a novelty in this class of compressors. This solution allows for easy and legible operation of the device. The system automatically detects irregularities in operation and informs by displaying the type of failure, and if there is a risk of damage to the compressor, it will turn it off 

SMART screw compressor - Description of components

L9 control panel

The HIT compressor is equipped with a microprocessor panel of the control system. It informs the user about the compressor's operating mode. The clear and detailed display provides information about:

• the device's defect through a detailed alarm code
• operating temperature of the screw module
• total number of hours worked and under load
• time remaining until the service inspection.
• fault memory function.
• Pressure under your control - By installing a pressure transducer, you can change the minimum and maximum pressure via the control panel. The working pressure is shown on the display in tenths of bar.

Automation

Modern automation, based on the highest quality components , protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Screw module

Made of the best components, the pump system of the HIT series compressor has one of the best efficiency ratios on the market in proportion to the engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.

Oil-air cooler

Extremely effective, two-function cooler ensuring optimal working conditions in the most difficult working conditions of the compressor. It allows to achieve a low outlet temperature of the air to the pneumatic network. High-temperature hydraulic hoses are used to connect the cooler with the module .

Cooler connection flange - the upper structure of the compressor enables connection of an exhaust system in order to disperse heat around the facility.

Screw module with tensioner

Made of the best components, the SMART compressor pumping system has one of the best efficiency ratios on the market in proportion to engine power. Reliable drive transmission by means of a belt transmission, which ensures stable operation of the compressor. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the outlet of the compressor (<4ppm). Throughout the service interval, the compressor maintains its efficiency at the highest level.

Soundproof housing

The housing of the HIT screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 67 [dBA], which is one of the best results in this class of compressors. 

Improvement of the galvanized tank for HIT screw compressors on the tank   

The item includes the replacement at the production stage of a standard, powder-coated pressure vessel with a galvanized (inside / outside) tank - Corrosion protection standard PN-EN ISO-1461. A 10-year warranty is provided for the galvanized pressure vessel.

The screw compressor of the VSI series is a comprehensive solution in the form of a compressed air source 48 - 150 cub m per hour in the company, constructed on the basis of the latest world technologies associated with the highest quality materials. The HIT compressor is equipped with a microprocessor panel of the control system, which is a novelty in this class of compressors. This solution allows for easy and legible operation of the device. The system automatically detects irregularities in operation and informs by displaying the type of failure, and if there is a risk of damage to the compressor, it will turn it off 

VSI Screw Compressor - Description of the components

Automation

Modern automation, based on the highest quality components , protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Screw module

Made of the best components, the pump system of the VSI series compressor has one of the best efficiency indicators on the European market, proportional to the engine power. By integrating the filters and the oil separator with the module, the number of connections with the rest of the components has been reduced to a minimum, thus achieving the highest degree of reliability.

Oil-air cooler

Extremely effective, two-function cooler ensuring optimal working conditions in the most difficult working conditions of the compressor. It allows to achieve a low outlet temperature of the air to the pneumatic network. It is equipped with a fan, controlled by a control panel depending on the compressor load. High-temperature hydraulic hoses are used to connect the cooler with the module.

Soundproof housing

The housing of the VSI screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 69 [dBA], which is one of the best results in this class of compressors. 

The screw compressor of the VSA series is a comprehensive solution in the form of a compressed air source 120 - 192 cub m per hour in the company, constructed on the basis of the latest world technologies associated with the highest quality materials. The HIT compressor is equipped with a microprocessor panel of the control system, which is a novelty in this class of compressors. This solution allows for easy and legible operation of the device. The system automatically detects irregularities in operation and informs by displaying the type of failure, and if there is a risk of damage to the compressor, it will turn it off 

VSA Screw Compressor - Description of the components

Automation

Modern automation, based on the highest quality components , protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Screw module

Made of the best components, the pump system of the VSI series compressor has one of the best efficiency indicators on the European market, proportional to the engine power. By integrating the filters and the oil separator with the module, the number of connections with the rest of the components has been reduced to a minimum, thus achieving the highest degree of reliability.

Oil-air cooler

Extremely effective, two-function cooler ensuring optimal working conditions in the most difficult working conditions of the compressor. It allows to achieve a low outlet temperature of the air to the pneumatic network. It is equipped with a fan, controlled by a control panel depending on the compressor load. High-temperature hydraulic hoses are used to connect the cooler with the module.

Soundproof housing

The housing of the VSA screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 69 [dBA], which is one of the best results in this class of compressors. 

The VSB series of compressors is a development of the technical thought that has been implied in the NKSB series compressors 189-372 cub meter per hour pressurized air. The compressor supervision system has been expanded, including a control panel with a more detailed information transfer and a wider range of settings modifications. Its unique feature is the ability to connect two compressors in a cascade. The above-mentioned attributes, combined with a reliable design, make VSB compressors the best investment option in their class of compressors.

VSB Screw Compressor - Description of the components

Automation

Modern automation, based on the highest quality components , protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Screw module

Made of the best components, the pump system of the VSI series compressor has one of the best efficiency indicators on the European market, proportional to the engine power. By integrating the filters and the oil separator with the module, the number of connections with the rest of the components has been reduced to a minimum, thus achieving the highest degree of reliability.

Oil-air cooler

Extremely effective, two-function cooler ensuring optimal working conditions in the most difficult working conditions of the compressor. It allows to achieve a low outlet temperature of the air to the pneumatic network. It is equipped with a fan, controlled by a control panel depending on the compressor load. High-temperature hydraulic hoses are used to connect the cooler with the module.

Soundproof housing

The housing of the VSB screw compressor has a compact housing , which has been made with high precision. The sound insulation boards installed inside the casing together with the compressor's constructional arrangement made it possible to achieve the noise barrier of 69 [dBA], which is one of the best results in this class of compressors. 

The VDBI series of compressors is based on the latest standards prevailing on the industrial compressor market. It was created for production plants as well as medium and large enterprises. The direct drive design ensures that the compressor of the VDBI series always achieves the highest degree of efficiency and energy efficiency. Equipping the compressor with an inverter with a wide range of operation makes it fully adaptable to the conditions of an industrial pneumatic network. Slow-speed and variable-speed direct drive compressors result in longer life of individual compressor components, lower air losses and low maintenance costs. Additionally, the compressor can be equipped with a heat exchanger, which translates directly into savings in the form of free heating or hot running water.

The most important advantages that make the VDBI project unique:

• low maintenance costs throughout the country
• significant reduction of electricity costs
• easy operation of the compressor
• device reliability confirmed by meticulous quality controls during the production process
• high efficiency of the screw module in relation to the power of the electric motor
• the compact design of the compressor gives great adaptation possibilities
• possibility of using the compressor's thermal efficiency
• cascade / matrix function

VDBI screw compressor - Component description

Screw module

Made of the best components, the VDBI compressor pumping system has one of the best effective efficiency ratios in relation to engine power on the market. A refined oil-air filtration system allows to obtain a low oil content in the compressed air at the compressor outlet (<4ppm). Throughout the service interval, the compressor maintains its performance at the highest level. The integrated filter holder with oil reservoir enables easy service.

Electric motor IE3

The high-efficiency class IE3 motor, compliant with the EU MEPS regulation, guarantees the highest energy efficiency. The technical solution of the lubrication system guarantees long and trouble-free operation. The engine was produced in an environmentally friendly production technology and is characterized by low heat emission to the atmosphere.

Drive transmission

The flexible coupling drive solution lasts longer than the belt transmission - it is resistant to abrasion, oil and aging. The Taper type design eliminates errors in the misalignment of the module and the motor, and the even load of the bearings of these elements increases the service life of the working elements. The design of the clutch ensures quiet operation of the drive through a flexible insert that dampens shocks and rotational vibrations.

Automation

Modern automation, based on the highest quality components, protects the compressor against:

• voltage drop in the electric network
• failure of the power phase
• incorrect direction of engine rotation
• overload of the engine
• too high oil temperature
• too low oil temperature
• starting of an unloaded screw module

Cooling system

Extremely effective, dual-function cooler provides optimal working conditions in the toughest working conditions of the compressor. It allows to achieve a low outlet temperature of the air to the pneumatic network. The cooling system has been equipped with an innovative turbine fan that increases the efficiency of the system, while reducing the noise level. High-temperature hydraulic hoses are used to connect the cooler with the module.

NXD inverter
    
What is a frequency converter and what is it for?

Generally speaking, a frequency converter is an electronic device whose task is to convert AC energy with a constant voltage amplitude and constant frequency into energy with variable frequency and variable voltage amplitude adjustable to the needs. A frequency converter is a device used for smooth regulation of the rotational speed of electric motors while maintaining the best possible operating parameters.

The use of a frequency converter in our screw compressors allowed to obtain very good regulating properties of induction motors, ensuring, with proper control, obtaining the full torque of the motor at low rotational speeds, maintaining a constant pressure in the compressed air network with its variable outflow.

VDBI screw compressors with an integrated NX-D frequency converter have a wide performance range. The continuously variable speed control of the compressor is the most economical way of regulating. The main advantages are lower electricity consumption compared to traditionally controlled compressors and maintaining a constant set pressure in the compressed air network.