Find

Used to hold up the animal and relieve the aerial structure of some of the weight during the hide-pulling process.

Made up of:

• Support structure.
• 1 hooks to grip between the legs of the animal, powered by pneumatic pistons and a pneumatic solenoid valve.
• Head that moves between the nylon guiding rails, which works with a pneumatic piston and a pneumatic solenoid valve.
• Electrical control panel.

Made of stainless steel with a galvanised steel supporting structure.

Operation:

When the button on the control panel is pressed, the hooks move and attach themselves to the animal's legs. At the same time, the head moves forwards and backwards. Once the hide has been pulled the button should be pressed again, which will move the head back and release the animal's legs.

Vacuum System for spinal cord remover and rest of fat.

• safety swparator for ensuring working of the vacuum
• pump in a dry enviroment, complete with an orifice
• for connecting to the vacuum hose pneumatic turn-cock for protecting to the pump
• suction hose between the suction adapter and the vacuum tank, diameter 38 mm, lenght 5 m
• spherical tap 11/4“ with manual control for starting and stopping the suction process at the adapter

Located along the cattle slaughter line, to raise up the operator so that he or she has easy access to any part of the carcass

• Chassis with legs that can be anchored to the floor.
• Metal sheet base with anti-slip aluminum grooves.
• Back part made of a smooth metal sheet.
• Protective rail on 2 sides.
• Baseboard around the bottom.
• 2 cylindrical columns with nylon bushings as guides.
• Powered by a pneumatic piston.
• Operated using a pedal integrated into the floor.
• Retractable lower channel to Inspect and collect viscera, powered by a pneumatic piston and operated using a manual valve.

Made entirely from AISI-304 stainless steel.

Powerful Splitting saw for hogs; for large medium and large sized plants.

• Safe to operate by installed sawblade-stop.
• Two-hand controll Easy to clean, external parts made of corrosion-free material.
• High cutting Speed.
• With water supply.

Installed within the hide-puller and used to keep the carcass tense during the hide-pulling process, to prevent any of the vertebrae being fractured.

Made up of:

• An electrical stimulator that applies a controlled electrical current (low voltage).
• Swinging arm. powered by a pneumatic piston, that moves the electrodes closer to the animal.
• Limit switch to automatically activate the swinging arm.
• Control panel.

Made of stainless steel.

Operation:

• When the hide-pulling roller lowers, it pulls and rolls the animal skin, and once it reaches the limit switch the swinging arm is automatically activated.
• The arm places itself on the lower back of the animal, which means the electrodes are automatically electrified, and this is transferred to the carcass.
• The animal is electrified, which means that the vertebrae do not break when the skin is pulled.
• When the hide-puller roller reaches the end, the electrodes automatically stop receiving electricity and return to their initial position.

Ideal for small slaughterhouses with only a few operators, because one person alone can skin, eviscerate and cut a carcass.

Description:

• Central hole measuring 1000x1000 mm where the animal will be placed.
• Passageways around the sides so the operator can carry out the processes for evisceration, skinning and cutting.
• Powered by 4 pneumatic pistons, which are operated using 2 pedals.
• Retractable lower chute that removes the viscera to a tub.
• Conveyor belt that transports the skin into the by-products area.

Made of AISI-304 stainless steel.

Fixed platforms allow the for veterinary doctor to have easy access to the animal carcass.

• The structure has legs (adjustable or with plates that can be bolted to the floor).
• Aluminum anti-slip floor.
• Access steps.
• Handrails on the steps and around the structure (except where space is needed to work).
• Baseboard around the bottom.

Made entirely from AISI-304 stainless steel.

• High motor output at low weight
• Easy to clean, Low maintenance
• Ergonomic position of handle
• Top mounted air connection

Scope of Supply

• Including sawblade (6 mm toothing) 

Breaking and brisket saw for hogs in medium and large sized plants.

• Light and easy to handle.
• Increased motorpower.
• To be used as brisket or breaking saw.
• Easy to clean.
• Different saw blades available

Operation:

1. It joins the telescopic section to the cart rail, so that the hooks slide on up to the pneumatic inserter.
2. The hooks automatically enter the inserter in between the pushers that are part of the height change mechanism.
3. The pushers on the height change mechanism drag the hooks to the height of the dock rail.

This machine is used to lower empty hooks that come from the automatic unhooking machine, as they pass along the aerial rail towards the hook container. 

Consist of:

• Closed chain circuit Ø 10 mm.
• Polyethylene rails.
• Double rail.
• Reinforced rubber pushers.
• Powered by a 0.37 KW gear motor.
• Electrical control panel, with stop and start buttons.

Made of stainless steel AISI304

Bar trolleys with hooks. Stainless steel 304 construction. Bars with articulated hooks to easy hanging red offals in slaughterhouses the pieces in the central bars for transportation and storage